When you input power supply from CN6, please connect also the Vbus line of the USB (CN4). Because TSC-34/RU recognizes that it was connected to the host computer with a Vbus line. Specifications Transmission spec: USB Specification 2.0 Full Speed Transfer mode: Control transfer (Command) / Interrupt transfer (Coordinate) Device class: Vendor definition Document No. DER-S0017A 6 Rev.1.1 ©2008 DMC Co., Ltd. TSC-34/RU User’s Guide 5. Packing Specification 5-1. Outline TSC-34/RU is wrapped up in the

2 1-1. Scope of Application ................................................................................................................... 2 1-2. Outline......................................................................................................................................... 2 1-3. Features ...................................................................................................................................... 2 1-4. General specification ........................

8 5-1. Version History ............................................................................................................................. 8 6. Warranty .............................................................................................................................. 9 6-1. Warranty Period ........................................................................................................................... 9 6-2. Warranty Target ........................................

0.1.W>0.05 4.L 1pcs in .30mm Within 5pcs /panel 0.05.W>0.03 10.L 2pcs in .20mm 0.03.W 20.L Acceptable Circular (Scratch/Dust) 0.4.D>0.3 *1 1pcs in viewing area *1 0.3.D>0.2 2pcs in .30mm 0.2.D Acceptable Applied only in the Active Area. Scratches or dusts in the outside of the Active Area are acceptable unless the electrical characteristics are affected. *1 Applied to the size of 14 inches or more. § Dirt Acceptable if not noticeable on a black mat. § Tip, crack (t = glass thickness) (applicable

Product Overview....................................................................................................................2 1-1. Products Applicable ...........................................................................................................................2 1-2. Overview ............................................................................................................................................2 1-3. Peripheral Composition Overview........................

Product Applicable .......................................................................................................... 3 1-2. Structure ......................................................................................................................... 3 1-3. Environmental Specifications........................................................................................... 3 1-4. Mechanical Characteristics ..........................................................................