The included Waranty Registration Card must be filled out and returned within 10 daysof purchase. This is essential for your Waranty to be effective should any problem arise with this product. Should any defect covered by the terms of the limited waranty be discovered within one year, EURO- PRO Operating LLC wil repair or replace any defective part provided the unit is returned by the original purchaser, freight prepaid, to: US: EURO- PRO Operating LLC, 21 Lawrence Paquette Industrial Drive, Champlain, N. Y 12919 Proof of purchase date and $12.95 for handling and return packing/shipping charges must be included.* The liability of under this warranty is limited solely to the cost of the replacement parts or the complete unit at our option. LABOUR CHARGES ARE NOT INCLUDED. This waranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes. This Limited Waranty does not cover damage caused by misuse, negligent handling, or damage due to faulty packaging or mishandling in transit (by anycommon carrier). This waranty is extended to the original purchaser of the unit and excludes all other legal and/ or conventional waranties. The responsibility of EURO- PRO Operating LLC, if any, is limited to the specific obligations expressly assumed by it under the terms of the limited waranty. In no event is EURO-PRO Operating LLCliable for incidental or consequential damages of any nature whatsoever. Some States/Provinces do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you. This waranty gives you specific legal rights which vary from state to state or province to province. * Important: Carefully pack item to avoid damage in shipping. Besure to attach tag to item before packing with your name, complete address and phone number with note giving purchase information, model number and what youbelieve is the problem with item. We recommend you insure the package ( as damage in shipping is not covered by your waranty) . Mark the outside of your package “ ATTENTION CUSTOMER SERVICE” . We are constantly strivng to improve our products, therefore the specifications contained herein are subject to change without notice. IMPORTANT SAFETY INSTRUCTIONS SAVE THESE 1 For Household Rev. 01/03H When using your Portable Shark Steam Cleaner, basic safety precautions should always be observed, including the following: OPERATING INSTRUCTIONS cont. 10 Blinds Use the detail brush to clean blinds. Move the brush over the surface, allowing enough time for the vapor to penetrate. Work quickly on PVC blinds. Test for color fastness on fabric blinds before using. Refrigerator- Use the angle concentrator/brush adapter alone to blow away dirt in the ice machine and on door seals. The vapor will not dry out or crack the seals as chemicals often do. Can openers and other kitchen equipment can be easily cleaned with the detail brush to get into all the nooks and crannies. To clean microwavesor other small appliancesuse the detail brush for small areas. Note: When cleaning small electrical appliances always unplug them from outlet before cleaning. Wood, Vinyl and Marble Flors Use the floor brush with a terry cloth attached. Move the brush across the floor as if you are mopping. When the towel is soiled, you can turn the towel over or replace it with a clean towel. If you are working on a very dirty area, you can move the brush over the area slowly, several times. If it is a wood floor, move fast to avoid heat or moisture buildup in the wood. By cleaning with the towel over the brush, you wil not affect the shine on the floor. To Strip Wax: Use floor brush for open areas; detail brush for corners or tight areas - no towel, slow strokes. Work a small area at a time - remove the emulsified wax from the floor. When all of the wax has been stripped, immediately clean the floor and brushes with water before residue has a chance to harden on them. Go back over the stripped area with the floor brush with a towel to remove any remaining residue before waxing. To Clean Waxed Floors: Wrap clean towel around the floor brush, brush quickly. This will cause the dirt to be removed but not the wax. Vinyl Floors: Do not allow heat to buildup in any kind of vinyl, since it can soften it enough to affect its texture. Work fast on vinyl. Tile Floors: Use the angle concentrator/brush adapter with the detail brush attached to an extension. Have the floor brush with cloth attached ready as well. Clean the grout between the tiles with the detail brush. Remove the detail brush and attach the floor brush, move the brush across the floor to clean the tile and remove excess moisture and residue. For areas of tile that are very dirty, remove the towel and agitate with the brush. Do not let the area dry before you wipe it up. Upholstery Use the floor brush attached directly to the hand grip with a clean white terry cloth towel. Use fast, light strokes,...