Évaluations - 1, GPA: 3
(
)
)
|
Photos et spécifications LG V-C6501HTU |
Facilité d'utilisation
Press on the pedal to lower the brush. Carpet or rug position.Press on the pedal to lift the brush up. • Upholstery Nozzle (8) Upholstery Nozzle is for vacuuming upholstery, mattresses, etc. The thread collectors help to pick up the threads and fluff. ■ Dusting Brush & Crevice Tool (9) Dusting Brush is for vacuuming picture frames, furniture frames, books and other irregular surfaces. Crevice Tool is for vacuuming in those normally hard-to-reach places such as reaching cobwebs, or between the cushions of a sofa. • Accessory Holder can be attached on the Extention wands using clamping hook. Accessories can be stored in the holder (10). How to plug in and use Pull out the mains lead to the desired length and plug into the socket. Adjusting the power level • Electronic power control (12) Suction capacity increases smoothly up to MAX. Storage (11) When you have switched off and unplugged the appliance, press on the button (14) to automatically rewind the cord. You can move or store your appliance in a vertical position by sliding the hook on the large cleaning head into the clip on the underside of the appliance. 5 I Changing the dust bag The dustbag needs changing when the cleaner is set to maximum power and the cleaner head is off the floor but the “bag full” indicator window(l3) is completely coloured red. • Turn off the appliance and unplug it. • Open the cover by pressing the hook(15) and lifting it up until it snaps into place. • Push the lever forwards in the direction of the arrow (18), and pull off the full paper filter bag towards the rear. Remove the bag and throw it away. • Insert the new paper filter bag into the unit with the arrow pointing downwards (19). Note: as the appliance is fitted with a safety device which checks that the bag is in place you cannot close the lid if the bag is not fitted correctly. Cleaning the motor filter The motor filter is situated inside the appliance between the dust bag and the motor. Each time that you change the air outlet filter we advise you to remove the motor filter(20)and to clean it by tapping to remover the dirt and then replacing it in the vacuum cleaner. • Turbine brush nozzle (21). •Easy & Powerful cleaning through adjusting the air-control lever (22). : use for hard floor & short type. : carpet use for long type carpet. * Cleaning turbine brush nozzle (23) Press the button on the rear side of the nozzle to separate the air cover. Use the dusting brush & crevice tool to vacuum clean the brush and fan. What to do if your appliance does not work? What to do when the suction performance reduces? Check that the appliance is correctly plugged in and that the electrical socket is working. • Stop the appliance and unplug it. • Check that the tubes, flexible hose and cleaning tool are not blocked. • Check that the dust bag is not full.Replace if necessary. • Please clean up the dust tank and wash the filter,if the indicator is action because the dust tank or tube is full. CLEANING THE DUST TANK AND FILTER ASSEMBLY For best cleaning results, the dust tank should be cleaned often. 1 .Turn off the appliance and unplug cord form wall outlet. 2. Remove hose , then open the cover. 3.0ne hand fasten the body, another hand catch the tank handle(24) and pull the tank assembly(25) up. 4. Push the release lever (27) of the filter assembly (26) and pull it out of the dust tank (25). 5. Wash the dust tank with sponge or soft cloth under cold running water. 6. Brush (28) is for cleaning the filter assembly(26). It is on the back of the filter assembly. 7. Open the filter supporter (29). 8.Clean the filter assembly (26) and the filter supporter (29) with the brush under cold running wat...
Ce manuel est également adapté pour les modèles :Aspirateurs - V-C6502HT (4.63 mb)