Évaluations - 5, GPA: 4.2
(
)
)
|
Facilité d'utilisation
It is made of environmentally friendly materials and can be recycled. Dispose of packaging that is no longer required at an appropriate recycling point. ■ Used vacuum cleaners Used vacuum cleaners still contain many valuable materials. Therefore, please take your used vacuum cleaner to your retailer or recycling centre to be recycled. For current disposal methods, please enquire at your retailer or your local council. ■ Disposal of filters and dust bags Filters and dust bags are made from environmentally friendly materials. As long as they do not contain substances that are not permitted to be disposed of in the household rubbish, you can dispose of them with your normal household rubbish. 7 en Please note • The mains socket must be protected by at least a 16 amp fuse. If a fuse should blow when you switch on the appliance, this may be because other electrical appliances which have a high current draw are connected to the same power circuit. To prevent the fuse from blowing, select the lowest power setting before switching the appliance on, and increase the power only once it is running. Fold out picture pages. Before using for the first time Figure KB Push the handle onto the flexible tube and until it engages. Figure Ea Push the crevice nozzle and upholstery nozzle back into the accessories holder as indicated. Setting up Figure a) Push the flexible hose adapter into the air intake opening on the vacuum cleaner lid until it engages. b) To remove the flexible hose, press the two lugs together and pull the tube out. Figure a) Push the handle into the suction pipe/telescopic tube. To remove it, turn the handle slightly and pull it off the tube. b) Push the handle straight into the telescopic tube until it engages. To release the connection, squeeze the collar sleeve and pull the handle out. Figure ea a) Connect the floor tool and the telescopic tube together. b) Push the telescopic tube straight into the connecting piece of the floor tool until it engages. To release the connection, squeeze the locking collar and pull the telescopic tube out. Figure na a) Connect the suction pipes together, or b) Unlock the telescopic tube to adjust its length by moving the sliding switch in the direction of the arrow. Figure Holding the power cord by the plug, pull out the required length and plug it into the mains socket. Figure Press the on/off button in the direction of the arrow to switch your vacuum cleaner on/off. Figure Adjust the suction by turning the on/off button in the direction of the arrow. Vacuuming Figure Adjusting the floor tool: ■ Rugs and carpets => iSi ■ Hard surfaces => ййШ Figure DOB Adjust the "autofloor" floor tool: ■ Hard floor setting => ÜÜ= Fixed position for vacuuming hard floors/ parquet ■ Automatic setting => auto The nozzle adjusts automatically to the floor covering and switches from hard floors / parquet to carpeted floors ■ Carpet setting => iQl Fixed position for vacuuming rugs and carpets If you are vacuuming varying types of floor coverings (hard floors <-> carpets), we recommend that you use the automatic setting so that the nozzle adjusts automatically to the floor and you do not need to switch over the nozzle setting. Figure Ш Remove the upholstery nozzle and crevice nozzle from the accessories holder as illustrated. Figure ES Vacuuming with accessories Attach the nozzles to the suction pipe or handle as required: a) Crevice nozzle for vacuuming crevices and corners, etc. b) Upholstery nozzle for vacuuming upholstered furniture, curtains, etc. c) Hard furnishings brush For cleaning window frames, cabinets, mouldings, etc. d) Hard-floor brush For vacuuming hard floor coverings (tiles, parquet flooring, etc.) Figure Ш After use, push the crevice nozzle and upholstery nozzle back into the accessories holder as indicated. Turbo brush If your vacuum cleaner is equipped with a turbo brush, please consult the accompanying instruction manual for notes on use and maintenance. ‘Depending on equipment 8 en Figure You can use the parking aid on the side of the vacuum cleaner if you wish to stop vacuuming for a short time. Once you have switched off the vacuum cleaner, slide the catch on the floor tool into the groove on the side of the appliance. Figure kb The appliance can also be carried using one of the two handles when vacuuming steps, for example. When the work is done Figure KB Unplug the vacuum cleaner. Tug the power cord briefly and let go. The cable then rewinds automatically. Figure EO To store or transport the vacuum cleaner, use the storage aid on the underside of the vacuum cleaner. Stand the vacuum cleaner up on its end. Slide the catch on the floor tool into the groove on the underside of the appliance. Changing the dust bag Replacing the dust bag Figure DSB a) If the dust bag change indicator is completely yellow when the floor tool is lifted from the floor and the highest suction power is select...