Évaluations - 1, GPA: 4
(
)
)
|
Facilité d'utilisation
18-19 Cleaning Dirt Sensor Optics ..................................................................................................................................20 Cleaning Exterior and Attachments ............................................................................................................20 Removing Clogs........................................................................................................................................................................21 BEFORE REQUESTING SERVICE......................................................................................................................22 WARRANTY................................................................................................................................................................................................23 WHATTO DO WHEN SERVICE IS NEEDED ......................................................................................24 - 3 - IMPORTANT SAFETY INSTRUCTIONS When using vacuum cleaner, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE _USING THIS VACUUM CLEANER_ WARNING To reduce the risk of fire, electrical shock, injury: 1. DO NOT leave vacuum cleaner when plugged in. Unplug from outlet when not in use and before servicing. 2. To reduce the risk of fire, electric shock - DO NOT use outdoors or on wet surfaces. 3. DO NOT allow to be used as a toy. Close attention is necessary when used by or near children. 4. Use only as described in this manual. Use only manufacturer's recommended attachments. 5. DO NOT use with damaged cord or plug. If vacuum cleaner is not working as it should, has been dropped, damaged, Teft outdoors, or dropped into water, return it to an authorized Panasonic Servicenter. 6. DO NOT pull or carry by cord, use cord as a handle, close door on cord, or pull cord around sharp edges or corners. DO NOT run vacuum cleaner over cord. Keep cord away from heated surfaces. 7. DO NOT unplug by pulling on cord. To unplug, grasp the plug, not the cord. 8. DO NOT handle plug or vacuum cleaner with wet hands. 9. DO NOT put any objects into openings. DO NOT use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow. 10. Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts. 11. DO NOT pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes. 12. DO NOT use without dust bag and/or filters in place. 13. Turn off all controls before unplugging. 14. Use extra care when cleaning on stairs. 15. DO NOT use cleaner to pick up flammable or combustible liquids such as gasoline or use in areas where they may be present. SAVE THESE INSTRUCTIONS THIS VACUUM CLEANER IS INTENDED FOR HOUSEHOLD USE ONLY Note: Before you plug in your Panasonic vacuum cleaner, make sure that the voltage indicated on the rating plate located at the back of the vacuum cleaner is the same as your local supply. -4- PARTS IDENTIFICATION On/Off Switch Hose Secondary Filter (Inside Dust Compartment) Hose Ring Mount Rating Plate Handle Release Pedal Nozzle -Furniture Guard FEATURE CHART (PANASONIC UPRIGHT VACUUM CLEANER) ^^EATURES Model POWER DIRT SENSOR HEADLIGHT CORD LENGTH BARE FLOOR OPTION MC-V7377 120V. AC(60Hz) 12.0 Amps Ves Yes 35 Ft. Yes TO ASSEMBLE CLEANER A WARNING Electrical Shock Hazard. DO NOT plug into electrical supply until assembly is complete. Failure to do so could result in electrical shock or injury. The vacuum cleaner main body and handle are packed separately. 1. The handle screw has been installed for shipping purposes. Please remove the screw before inserting the handle. Insert the handle as shown in the illustration. Make sure the ON/OFF switch is in the OFF position before installing. 2. Insert the screw that you have removed. Be sure the screw is tightened, but not overtightened. Remove screw for the hose holder. Rotate and align hose holder hole with screw hole in handle and insert screw. j y Hose Holder - Hose Holder Screw Handle Screw 3. There are two (2) recessed areas located on the back of the vacuum, as shown in the illustration, designed to secure the power cord during vacuuming. Pow Always push the power cord £on down into these recessed areas to help keep the power cord from hanging near the nozzle ^ / and being damaged by the agi- ^ tator._III 4. Loosely wrap the power cord around the quick release cord hook and the lower cord retainer. Secure the plug head to the cord by pushing the power cord into the retainer on the plug head. Retainer — (Plug Head) 1. The upper cord hook has a quick-release action. To I release the power cord, 1 rotate the hook downward 1^ and the complete power cord L will drop off the hook for 1 m immediate use. -Jm • 7 L-.Conrf jjsSrf Hook 2. DO NOT unplug the power O) cord by pulling on the cord. PT Grasp the plug head and pul...