Évaluations - , GPA: ( )

Instructions Samsung, Modèle SC4380

Fabricant : Samsung
Taille : 3.67 mb
Nom Fichier :

Langue d'enseignement:

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Par ce dispositif a également d'autres instructions :

Aspirateurs - SC4380 (1.88 mb)

Aspirateurs - SC4380 (1.89 mb)

Aspirateurs - SC4380 (3.68 mb)

Aspirateurs - SC4380 (1.76 mb)

Take the dust bin out by pressing the button. Separate the dust bin cover. NOTE You may rinse the dust bin with cold water. - Empty into a plastic bag (recommended for asthma/allergy sufferers) 6 4CLEANING THE DUST PACK NOTE When suction is noticeably reduced continuously, please empty the Dust Pack(4-2) as shown in the following illustration. 4-1. WHEN TO CLEAN THE DUST PACK Turn the vacuum power to 'MAX' - If suction is noticeably reduced during cleaning, please check the dust pack as indicated below. HANDLE CONTROL If suction is noticeably reduced with the inlet floating 10cm above flat floor, clean it. 4-2 CLEANING THE DUST PACK 2 Remove the dust bin and dust pack as Remove the sponge and filter fromshown. the dust pack 4 Wash the sponge and the filter of the dust Let the sponge and filter dry in thepack with water. shade for more than 12 hours. 5 6 Put the sponge and filter into the dust Put the assembled dust packpack. into the main body. NOTE : Make sure the filter is completely dry before putting it back into the vacuum cleaner. Allow 12 hours for it to dry. 7 8 Take out both the dust bin and the dust pack. Remove the motor protection filter from the vacuum cleaner. Shake and tap the dust from it and put back in machine. NOTE : Replacement filters are available at your local Samsung distributor. 5CLEANING THE MOTOR PROTECTION FILTER Press the fixed frame part at the back of the main body to remove. 6CLEANING THE OUTLET FILTER Remove and replace the blocked outlet filter. OPTION - MICRO FILTER OPTION - IF YOU HAVE A PROBLEM PROBLEM CAUSE REMEDY 0 Motor does not start. No power supply. Thermal cut-out. Check cable, plug and socket. Leave to cool. Suction force is graduallydecreasing. Nozzle, suction hose or tube is blocked. Check for blockage and remove it. Cord does not rewind fully. Check that the cord is not twisted or wound unevenly. Pull the cord out 2-3m and push the cord rewind button. Vacuum cleaner does not pick up dirt. Crack or hole in hose. Check hose and replace ifrequired. Low or decreasing suction Filter is full of dust. Please check filter and, if necessary, clean as illustrated in the instructions. If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country Customer Care Center . Web Site AUSTRALIA 1300 362 603 HONG KONG (852) 3698 4698 MALAYSIA 1800-88-9999 SINGAPORE 1800-SAMSUNG (7267864) 9 MEMO MEMO MEMO MEMO MEMO ...