Évaluations - 1, GPA: 5 ( )

Fabricant : Samsung Taille : 382.51 kb Nom Fichier : Langue d'enseignement:

• Avoid picking up hard, sharp objects with the cleaner, they may damage the cleaner. • Always turn off this appliance before connecting or disconnecting the hose, removing the bottom plate for maintenance. • Use only on dry, indoor surfaces, never change the plug in any way. • Do not modify the polarized plug to fit a non-polarized outlet or extension cord. • Do not touch the brush roller when it is rotating. • Keep suction away from your face when using nozzles and pipe. • Do not pull the power cord around sharp corners and do not allow it to become trapped. • Unplug before connecting turbine nozzle.(only using turbine-brush model) SAVE THESE INSTRUCTIONS FOR FUTURE USE. 1 Assembling Parts Assembled Vacuum Cleaner Parts Front Back 1-1 WARNING! The assembled cleaner will look like the illustration to the left. 1.Handle 2.Power switch 3.Quick release cord hook 4.Post-Motor Filter 5.Crevice tool 6.Handle release 7.Carrying handle 8.Hose 9.Extension wand 10.Combination tool 11.Cyclone-Lever 12.Dirt Cup 13.Filter Cup 14.Upper Tank 15.Louvers 16.Hose Wand Base 17.Height Adjustment Dial 18.Hose Clip OPERATE THE VACUUM CLEANER ONLY AT THE VOLTAGE SPECIFIED ON THE NAMEPLATE. Step 1. Attaching the Handle Stand the vacuum upright and slide the base of the handle firmly into the grooves at the top of the vacuum body. Step 1. Attaching the Handle Slide the end of the hose wand with tabs into the Hose Wand Base. 1-3 1-5 Insert the screw provided into the existing hole. Tighten the screw securely with a screwdriver. Before securing the handle, please check that the handle is fitted to the vacuum body and make sure there’s no gap. Slide the extension wand and the crevice tool together into the storage clip. 2 Operation 2-1 2-4 2-5 2-2 2-3 ON-OFF Switch 1.To turn cleaner on, press the Power switch. 2.To the cleaner off, press the Power switch again Carrying handle The cleaner can also be moved by using the carrying handle. 2-6 2-7 2-8 Cleaning lightweight flexible rugs Stand on one end of rug and move cleaner toward other end or edge. Before reaching edge, push down on handle. This will lift up the nozzle(front of cleaner)and will prevent rug from clinging to cleaner. Continue to lift front of cleaner so that when you have reached the edge, it is completely off the rug. Move cleaner back to start again, lower front of cleaner, and use only forward strokes. Cleaning Tool attachments Attachment tools can be used to clean furniture or drapes, on stairs or in corners. Cleaning Tool attachments Carpet and rug cleaning takes place at the nozzle (A). When it is necessary to raise and lower the nozzle for various carpet pile heights, rotate the nozzle control dial (B) to the desired setting. For maximum cleaning performance, The following carpet height settings are recommended: •Lowest setting: for all types of carpet •Higher settings: for very deep pile carpet where easier pushing effort is desired, while maintaining good cleaning performance. Note: If the cleaner is ...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :