Évaluations - 4, GPA: 4.5
(
)
)
|
Facilité d'utilisation
If plug does not fit, contact a qualified electrician to install the proper outlet. • Repairs to electrical appliances may only be performed by qualified service engineers. Improper repairs may lead to serious hazards for the user. • Do not plug in if control knob is not in OFF position. Personal injury or product damage could result. (Depending on model) • Keep children away and beware of obstructions when rewinding the cord to prevent personal injury. The cord moves rapidly when rewinding. (Depending on model) • The hose contains electrical wires. Do not use it if it is damaged, cut or punctured. Failure to do so could result in death,or electrical shock. (Depending on model) -6 IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS CAUTION • Do not put any objects into openings. • Use accessory nozzles in sofa mode. Failure to do so could result in product Failure to do so could result in product damage. damage. • Do not use with any opening blocked: • Make sure the filters (exhaust filter and keep free of dust, lint, hair, and anything motor safety filter) are completely that may reduce air flow. dry before replacing in the machine. Failure to do so could result in product Failure to do so could result in product damage. damage. • Do not dry the filter in an oven or • Do not use vacuum cleaner without microwave. dust tank and/or filters in place. Failure to do so could result in fire hazard. Failure to do so could result in product • Do not dry the filter in a clothes dryer. damage. Failure to do so could result in fire hazard. • Do not use vacuum cleaner to pick up sharp hard objects, small toys, pins, • Do not dry near an open flame. paper clips, etc. Failure to do so could result in fire hazard. They may damage the cleaner or dust bin. • Always clean the dust bin after vacuuming carpet cleaners or fresheners, powders • Store the vacuum cleaner indoors. and fine dust. Put the vacuum cleaner away after use to prevent tripping over it. These products clog the filters,reduce airflow and can cause damage to the cleaner. • The vacuum cleaner is not intended to Failure to clean the dust bin could cause use by young children or infirm people permanent damage to the cleaner. without supervision. (Depending on model) Failure to do so could result in personal injury or productdamage. • Don ’t grasp the tank handle when you are moving the vacuum cleaner. • Only use parts produced or recommended by LG Electronics The vacuum cleaner s body may fall when Service Agents. separating tank and body. Personal injury Failure to do so could result in product or product damage could result. You should damage. grasp the carrier handle when you aremoving the vacuum cleaner. • Use only as described in this manual. (Depending on model) Use only with LG recommended or approved attachments and accessories. • If after emptying the dust tank the indicator light is on(red), clean the dust Failure to do so could result in personal tank. injury or product damage. Failure to do so could result in product • To avoid personal injury and to prevent damage. (Depending on model) the machine from falling when cleaning stairs, always place it at the bottom of stairs. Failure to do so could result in personal injury or product damage. -7 IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS CAUTION Thermal protector : This vacuum cleaner has a special thermostat that protects the vacuum cleaner in case of motor overheating. If the vacuum cleaner suddenly shuts off, turn off the switch and unplug the vacuum cleaner. Check the vacuum cleaner for possible source of overheating such as a full dust tank, a blocked hose or clogged filter. If these conditions are found, fix them and wait at least 30 minutes before attempting to use the vacuum cleaner. After the 30 minute period, plug the vacuum cleaner back in and turn on the switch. -8 E - 9 - -10 CLEANING THE DUST TANK AND FILTER ASSEMBLY For best cleaning results, the dust tank should be cleaned often. 1.Unplug cord from wall outlet. 2. Pull lid release out and up, then lift filter cover. 3. Pull the dust tank assembly (29) up. 4. Push the release lever (30) of the filter assembly (31) and pull it out of the dust tank (32). 5. Wash the dust tank with sponge or soft cloth under cold running water. 6. Brush (33) is for cleaning the filter assembly(31). It is on the back of the filter assembly. 7. Pull the filter supporter (34) down from the filter assembly (31). 8.Clean the filter assembly (31) and the filter supporter (34) with the brush under cold running water. Do not use detergent or wash in washing machine or dishwasher. 9.Allow the filter assembly (31) and filter supporter (34)to dry in shaded location for a day. Do not tumble or spin dry, nor microwave or place in oven or in path of direct heat. Ensure both the filter and filter supporter are completely dry before placing it back into the vacuum. HOW TO FIT THE BAG MOUNT AND THE DUST BAG If you want to use a dust bag instead of th...