Log:
Évaluations - 3, GPA: 4.7 ( )

Instructions Hyundai, Modèle H-VC1590

Fabricant : Hyundai
Taille : 242.44 kb
Nom Fichier : Hyundai-H-VC1590-Pdf-Rus.Pdf
Langue d'enseignement: ruen
Photos et spécifications   Hyundai  H-VC1590
Aller à la télécharger



Facilité d'utilisation


Power fixed cleaner is without power control. To stop it press the On/Off button again. • You can adjust the vacuum cleaner power using the power control on handle. - decrease power for cleaning curtains, books, furniture, etc. 3 - increase power for cleaning bare floor. To rewind the cord, press the carrying handle (the cord rewind button is under it) and controlling the cord with the other hand to ensure that it does not whip causing damage. Advantages of your vacuum cleaner • Your vacuum cleaner is equipped with 5 step filtration system: - HEPA-filter. - the motor protection filter established between the dust bag compartment and the engine of a vacuum cleaner. - the micronic filter, established on the air outlet. • The 5-step filtration system reliably keeps a up dust inside a vacuum cleaner and provides maximum careful and hygienic tidying up. • Convenience of operation - the removable plastic dust bin, due to system of the clearing based on vorticose entering air in vacuum cleaner, dust instantly settles in dust bin. • The temperature controller of the motor □ Key points □ The motor is provided with a temperature controller to protect the motor, in case the cleaner becomes overheated due to some causes, the temperature controller can automatically cut off its power. At that time it’s necessary to pull out the power plug and turn off the switch, and to take off the dust box to clear away the dust, to let the cleaner cool down for about 1 hour. Then it’s possible to insert the plug and turn on the switch to re-start. Move and transport the cleaner: Caution: • There is a special design of the grip on this machine to enable you to use the grip to transport the cleaner in two ways. In addition, there is also a grip on the dust box for transporting the dust box. • . There is a fixed grip designed atop the machine, to enable you to lift the cleaner very conveniently. Care and cleaning • Switch off the appliance and pull out the plug from the power supply. • Clean the outside of the appliance with a soft cloth with mild detergent. Harsh or abrasive detergent will damage the outside surface. • Never immerse the appliance or cord into water and other liquids. Cleaning dust bin container When dust tank is taken out, move the button on tank bottom cover (don’t move too much to avoid the button rupture), press down to open the bottom cover of the tank, spill the rubbish in it. (Attention: it’s necessary to clear the rubbish immediately when the dust capacity is near to the lower seal ring of HEPA assembly; before this operation, please make sure the rubbish exit of tank is right to the dustbin, and be care of the dust spatter.) • Clean dust bin container regularly. 4 • Switch off the appliance before cleaning dust bin container. • Remove the flexible hose. • Take out the dust bin container and pull out the HEPA-filter. • Empty dust bin container. • For cleaning the filter use brush and water. • Let the HEPA-filter and the cover dry up completely. • Fix the HEPA-filter into the dust bin container. • Put the container back. Cleaning the filters • Please clean the filters at least once a year. If you frequently use the appliance wash the motor filter after 3-5 cleanings of the dust container. • Switch off the appliance and pull out the plug from the power supply. • For cleaning the micronic filter, established on the air outlet, take off the rear grill from the unit and pull out the micronic filter. The air outlet filter may usually be used for six to twelve months. It’s possible to begin to use the cleaner only after making it sure that all the filters have been correctly installed in the machine. You may either clean the filter or peplace it if necesery. • Wash the filter with warm water and dry in the sun. • Take out the central filter of the dust box. Please use a small brush to clear the central filter. .After clearing the central filter, please remember to mount the central filter into the dust box just as it was mounted. • .Then clear the hose of the cleaner, and insert the hose after the clearing is completed. 1 Caution: The white central filter in the dust box may change its color, this is normal, and will not influence its filtering function. If your hose very difficult to clear, we suggest that you might use water to rinse them; however, each time after they are rinsed with water, be sure to dry them in the dry air at least for 24 hours. • Put the filters back. Key points : Before replace any of the filters, it’s necessary to cut off the power supply of the cleaner. Mind: In this cleaner, the front cover can be closed even when the dust box and central filter are not mounted to their exact positions; however, the work at such a time is not effective, there is no suction force. At that time it’s necessary to make a careful check to see whether or not the central filter is correctly mounted into the dust box. Caution: Please keep the inlet passage a thoroughf...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories