Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
As a result, the dustbag-full indicator will indicate that the dustbag is full. Replace the dustbag, even if it is not full yet (see section ‘Replacing the dustbag’ in chapter ‘Maintenance’). -Never use the appliance without the motor protection filter.This could damage the motor and shor ten the life of the appliance. -Only use Philips s-bag ` synthetic dustbags. -During vacuum cleaning, especially in rooms with low air humidity, your vacuum cleaner builds up static electricity. As a result you can experience electric shocks when you touch the tube or other steel par ts of your vacuum cleaner.These shocks are not harmful to you and do not damage the appliance. To reduce this inconvenience we advise you: English 1 to discharge the appliance by frequently holding the tube against other metal objects in the room (for example the legs of a table or chair, a radiator etc.); 2 to raise the air humidity level in the room by placing water in the room. For example, you can hang containers filled with water from your radiators or place bowls filled with water on or near your radiators. Electromagnetic fields (EMF) This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today. Before first use 1 2 Take the appliance and its accessories out of the box. Remove any sticker, protective foil or plastic from the appliance. Preparing for use hose 1 To connect the hose, push it firmly into the appliance. English 2 To disconnect the hose, push the buttons (1) and pull the hose outof the appliance (2). telescopic tube 12 1 To connect the tube to the handgrip, insert the handgrip into the tube. Fit the spring-loaded lock button into the opening in the tube (‘click’). -To disconnect the tube from the handgrip, press the easy-release button (1) and pull the handgrip out of the tube (2). 2 Adjust the tube to the length you find most comfortable during vacuuming. English nozzles and accessories 1 To connect a nozzle or accessory to the tube, insert the tube into the nozzle or accessory. Fit the spring-loaded lock button into the opening in the tube (‘click’). Note:You can also connect the nozzles and accessories directly to the handgrip in the same way. 2 To disconnect a nozzle or accessory from the tube, press the easy- release button and pull the tube out of the nozzle or accessory. Combination nozzle (specific types only) The combination nozzle can be used on either carpets or hard floors. 1 To clean hard floors, push the rocker switch on top of the nozzle with your foot. The brush strip for cleaning hard floors comes out of the nozzle , housing. 2 To clean carpets, push the rocker switch again. The brush strip disappears into the nozzle housing. , Accessories 1 You can connect the crevice tool (1) or the small nozzle (2) directly to the handgrip of the hose or to the tube. -Use the crevice tool to clean narrow corners or hard-to-reach places. -Use the small nozzle to clean small areas, e.g. the seats of chairs and sofas. English Accessory holder 1 Snap the accessory holder onto the handgrip. 2 Snap the crevice tool and small nozzle into accessory holder. Using the appliance 1 2 Pull the cord out of the appliance and put the mains plug in the wall socket. Press the on/off button on top of the appliance with your foot to switch on the appliance. Adjusting suction power During vacuuming, you can adjust the suction power with the selection wheel on top of the appliance. -Use maximum suction power to vacuum ver y dir ty carpets and hard floors. -Use moderate suction power to vacuum carpets. -Use minimum suction power to vacuum cur tains, table carpets, etc. Tip: By reducing suction power, you can move the nozzle across the floor more easily. 10 English Pausing during use 1 If you want to pause for a moment, insert the ridge on the nozzle into the parking slot to park the tube in a convenient position. storage 1 2 3 Switch off the appliance and remove the mains plug from the wall socket. Slide the tube parts into each other to reduce the tube to its shortest length. Press the cord rewind button to rewind the mains cord. 4 To store the appliance in upright position, insert the ridge on the nozzle into the storage slot. Maintenance Tip: For optimal performance, always use the Philips s-bag® ultra long performance available under type number FC8027. Always unplug the appliance before you clean the appliance, replace the dustbag and before you replace the filters. Note: In some cases, the dustbag-full indicator can indicate that the dustbag is full, even though it is not.This may occur if the pores of the dustbag are clogged (e.g. when you have vacuumed ashes, fine sand, lime, cement dust and similar substances) or if something is blocking the nozzle, tube and/or hose. If the pores of the dustbag are clogged, you have to replace the dustbag, even if it is not ful...