Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Aspirateurs - VR62601LV (58.3 mb)
Aspirateurs - VR62601LV (58.3 mb)
Facilité d'utilisation
SMART DIAGNOSIS
If a voice message is announced after Smart Diagnosis, refer to the following table to take proper actions.
Voice message
Measures (for reference)
Starting HOM-BOT smart diagnosis. Please step away and remove any Clear any object within a 1 m radius around Home Station, and stay
items within 1 meter, or about 3 feet.
back until the diagnosis is complete.
HOM-BOT needs to be charging in order to activate smart diagnosis.
Move Robot cleaner to the Home Station to recharge it.
Please dock the HOM-BOT to the home station.
Starting HOM-BOT Smart diagnosis. Scheduled cleaning has been
cancelled for Smart diagnosis. Please step away and remove any items
within 1 meter, or about 3 feet.
No defect found during diagnosis.
Unable to initiate smart diagnosis due to a low battery. Please try
Try the Smart Diagnosis again after recharging the battery.
again after battery is charged.
Please check that the dust bin and fi lter are properly installed.
Open the Dust Bin Cover and examine the bin.
HOM-BOT will not charge due to infrared sensor error. Please try
Run Smart Diagnosis again and, if the same message is announced,
smart diagnosis again after turning the main power switch on the
contact an LG Electronics service center.
back of the HOM-BOT 'Off' then 'On' again. If the problem continues,
please contact LG Electronics customer care.
HOM-BOT will not charge due to ultrasonic sensor error.
Run Smart Diagnosis again and, if the same message is announced,
contact an LG Electronics service center.
HOM-BOT will not charge due to a problem with the cliff sensors on
Clean the three Cliff Sensors on the bottom at the front of the unit.
bottom. Please wipe the sensors clean.
Please clean the camera sensor on bottom right side.
Clean the lens of Camera Sensor on the bottom-right
Please clean the obstacle detecting sensor windows on the left and
Clean the lens of the Obstacle Sensors on both the left and right
right side of the HOM-BOT.
hand sides.
A problem has been found on the Gyro Sensor. Please try smart
Run Smart Diagnosis again and, if the same message is announced,
diagnosis again after turning the main power switch on the back of
contact an LG Electronics service center.
the HOM-BOT 'Off' then 'On' again. If the problem continues, please
contact LG Electronics customer care.
Please check for foreign material on the left wheel.
Check for foreign materials on the left wheel.
Please check for foreign material on the right wheel.
Check for foreign materials on the right wheel.
A problem has been found on the left wheel sensor. Please try smart
Run Smart Diagnosis again and, if the same message is announced,
diagnosis again after turning the main power switch on the back of
contact an LG Electronics service center.
the HOM-BOT 'Off' then 'On' again. If the problem continues, please
contact LG Electronics customer care.
A problem has been found on the right wheel sensor. Please try smart Run Smart Diagnosis again and, if the same message is announced,
diagnosis again after turning the main power switch on the back of
contact an LG Electronics service center.
the HOM-BOT 'Off' then 'On' again. If the problem continues, please
contact LG Electronics customer care.
A problem has been found with the brush. Please check for any foreign Check for any foreign material stuck in the Brush.
material.
A problem has been found in the suction motor. Please try smart
Run Smart Diagnosis again and, if the same message is announced,
diagnosis again after turning the main power switch on the back of
contact an LG Electronics service center.
the HOM-BOT 'Off' then 'On' again. If the problem continues, please
contact LG Electronics customer care.
A problem has been found in the acceleration sensor. Please try smart Run Smart Diagnosis again and, if the same message is announced,
diagnosis again after turning the main power switch on the back of
contact an LG Electronics service center.
the HOM-BOT 'Off' then 'On' again. If the problem continues, please
contact LG Electronics customer care.
In order to listen to the smart diagnosis result again, please press the
If you need to repeat the diagnosis result, press the 'Home' button,
charging button. To stop, please press the stop button.
or press 'Stop/OK' button to fi nish the diagnosis.
Smart diagnosis mode will be turned off.
Smart Diagnosis mode will not operate with the mop plate attached.
Run Smart Diagnosis again after removing the Mop Plate.
Please try again after removing it.
Smart diagnosis has failed to complete its diagnostics. Please try
Turn the main power switch OFF and then ON again to resume the
again after turning the main power switch on the back of the HOM-
diagnosis. Do NOT touch the robot or disturb its operation until the
BOT 'Off' then 'On' again.
diagnosis is complete.
Please check if the charging terminal is damaged or dirty.
Clean the bottom of the machine and Charging Terminal on Home
Station.
28
...