Évaluations - 3, GPA: 4
(
)
)
|
Facilité d'utilisation
Mode Max.32 per Radio Wide 80 dB 80 dB Trunked Network 1023 Narrow 70 dB 67 dB Channel Spacing Wide 25 kHz, 30 kHz 25 kHz Narrow 12.5 kHz, 15 kHz 12.5 kHz Operating Voltage 13.6 V DC±15 % Current Drain Standby 0.4 A 0.4 A 0.4 A 0.4 A Receive 1.0 A 1.0 A 1.0 A 1.0 A Transmit 9.0 A 13.0 A 9.0 A 13.0 A Duty Cycle Transmit: 20 % Operating Temperature Range -22 .F ~ +140 .F (-30 .C ~ +60 .C) Frequency Stability ±0.00025 % (-22 .F ~ +140 .F) Antenna Impedance 50 . Channel Frequency Spread Type 1 38 MHz 70 MHz Type 2 – 70 MHz Dimensions (W x H x D), 6-5/16” x 1-3/4” x 6-3/16” Projections not included (160 mm x 45 mm x 157 mm) Weight (net) 3.3 lbs. (1.5 kg) FCC ID Type 1 K4437303110 K4437303210 K4437313110 K4437313210 Type 2– – – K4437313120 K4437313220 IC Certification Type 1 282F-37303110 – – – Type 2– – – 282F-37313120 – *Maximum capability depends on the number of programmed Zone and repeater channels. Applicable MIL-STD & IP mount / 10 feet) ¦ KCT-23M3 DC Cable (Remote mount / 23 feet) ¦ VGS-1 ¦ KPS-10A Voice Guide & DC Power Supply Storage Unit ¦ KES-3 External Speaker ¦ KPS-15 DC Power Supply ¦ KES-5 External Speaker (requires KAP-2) ¦ KMB-10 Key Lock Adapter ¦ KLF-2 Line Noise Filter All accessories and options may not be available in all markets. Contact an authorized Kenwood dealer for details and complete list of all accessories and options. Model TK-7180 TK-7180H TK-8180 TK-8180H RECEIVER (Measurements made per EIA/TIA-603) Sensitivity (12dB SINAD) Wide 0.25 .V Narrow 0.28 .V Intermodulation Distortion Wide/Narrow 75 dB (±50, 100 kHz) Spurious Response** 90 dB 85 dB Audio Output (4 . Impedance) 4 W with less than 5 % distortion TRANSMITTER (Measurements made per EIA/TIA-603) RF Output Power Type 1 30 to 1 W 50 to 10 W 30 to 1 W 45 to 10 W (490 -520 MHz:25 to 1 W) (490 -520 MHz:40 to 10 W) Type 2 – – 30 to 1 W 45 to 10 W Spurious Response 70 dB Type of Emission Wide 16K0F3E Narrow 11K0F3E FM Hum & Noise Wide 50 dB Narrow 45 dB Microphone Impedance 600 . Audio Distortion Wide/Narrow 3 % ** Typical specifications Kenwood follows a policy of continuous advancement in development. For this reason specifications may be changed without notice. Standard MIL 810C MIL 810D MIL 810E MIL 810F Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II High Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II Low Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II Temperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, II Solar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I Rain 506.1/Procedure I, II 506.2/Procedure I, II 506.3/Procedure I, II 506.4/Procedure I, III Humidity 507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4 Salt Fog 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4 Dust 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III Vibration 514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure I Shock 516.2/Procedure I, II, III, V 516.3/Procedure I, IV, V 516.4/Procedure I, IV, V 516.5/Procedure I, IV, V International Protection Standard Dust & Water Protection P54: Radio itself P54/55: Remote Head with KRK-10 footnotes from Front: 1 Easy Option Port: Supports Encryption boards or VGS-1 only; ANI boards are not supported. VGS-1: Auto-Reply only operates in MPT trunked mode. Auto-Record, Voice Memo operates in Conventional & MPT Trunked modes. 2 DTMF Manual Encode (DTMF microphone required) 3 KCT-46 ignition sense cable option required; plugs into mobile ignition sense pig-tail cable. 4 KPG-96D required: Windows®98/ NT/ 2000/ Me/XP compatible. 5 MIL-STD “Driven-Rain” and IP-55 Water/Dust Intrusion apply to remote control head only; IP54 applies to radio chassis. 6 Conventional Mode: Mode entry by PF key or auto Mode Change. Network/Trunking operations are MPT1327/1342 compataible. 7 Special Alert Tone Patterns: enabled for MPT Individual Call, Auto Mode Change. 8 Companded Audio can be enabled for “all Channels: in Trunked Mode and per Channel in Conventional Mode. 9 KAP-2 required: Public Address & Horn Alert operate in MPT mode only. * TK-8180K/HK models are derated to 25W/ 40W power from 490-512 MHz *To meet above Mil810 and IP grade, weather proof microphone KMC-35 or KMC-36 has to be connected. ADS#38905 Printed in USA JQA-QMA1205 ...