Évaluations - 1, GPA: 4
(
)
)
|
Facilité d'utilisation
Channels per Zone 250 (MIL-SPEC noise-canceling) Channel Spacing Microphone Analog 12.5 / 15 / 20 / 25 / 30 kHz 12.5 / 25 kHz Digital 12.5 kHz ¦ KMC-28 Operating Voltage 13.6V DC ± 15% 13.4V DC ± 15% 13.6V DC ± 15% 13.4V DC ± 15% Keypad Microphone Current Drain (MIL-SPEC noise-canceling) Standby Less than 0.6A Receive Less than 2.3A Transmit Less than 12A Less than 25A Less than 14A Less than 28A Duty Cycle Transmit: 20% Operating Temperature Range -22 °F to +140 °F (-30 °C to +60 .C) ¦ KCT-18 Frequency Stability ± 2.0 ppm (-22 °F to +140 °F) Antenna Impedance 50 . Ignition Sense Cable Dimensions (W x H x D) RF Deck only 7.01 x 2.36 x 7.68 in. 7.01 x 2.36 x 12.87 in. 7.01 x 2.36 x 7.68 in. 7.01 x 2.36 x 12.87 in. ¦ KCT-22 (178 x 60 x 195 mm) (178 x 60 x 327 mm) (178 x 60 x 195 mm) (178 x 60 x 327 mm) Remote Control Cable with KCH-14 or15 7.05 x 2.36 x 9.09 in. 7.05 x 2.36 x 14.29 in. 7.05 x 2.36 x 9.09 in. 7.05 x 2.36 x 14.29 in. 8ft./17ft./25ft. (179 x 60 x 231 mm) (179 x 60 x 363 mm) (179 x 60 x 231 mm) (179 x 60 x 363 mm) Weight RF Deck only 5.3 lbs. (2.4 kg) 8.6 lbs. (3.9 kg) 5.5 lbs. (2.5 kg) 9.2 lbs. (4.2 kg) with KCH-14 5.9 lbs. (2.7 kg) 9.2 lbs. (4.2 kg) 6.2 lbs. (2.8 kg) 9.9 lbs. (4.5 kg) ¦ KCT-23 with KCH-15 5.9 lbs. (2.7 kg) 9.2 lbs. (4.2 kg) 6.2 lbs. (2.8 kg) 9.9 lbs. (4.5 kg) DC Power Cable FCC ID Type 1 K4435753110 K4435753210 K4439923110 K4439923210 Type 2 K4439923120 K4439923220 ¦ KES-5 IC Certification External Speaker (20W) Type 1 282F-35753110 Type 2 282F-39923120 RECEIVER (Measurements made per EIA/TIA-204-D) Sensitivity ¦ KCH-14 Digital (5% BER) 0.25 .V Digital (1% BER) 0.40 .V Basic Remote Analog 12 dB SINAD 0.25 .V Control Head Selectivity Digital -63 dB Analog @ 25/30 kHz -83 dB / -85 dB -83 dB / ¦ KCH-15 Analog @12.5/15 kHz -76 dB / -80 dB -76 dB / Full-Featured Remote Intermodulation Distortion (Digital & Analog) -80 dB Control Head Spurious Response (Digital & Analog) -90 dB ¦ KRK-5 Single Control Head Remote Kit ¦ KRK-6DH Dual Control Head Remote Kit Audio Distortion Digital Analog Audio Output Internal (KCH-14) @3% @5% Less than 1.0% Less than 2.0% 1.5 W at 8 . 1.625 W at 8 . External @3% 12 W at 4 . @5% 13 W at 4 . TRANSMITTER (Measurements made per EIA/TIA-152-C) RF Output Power 50 W to 5 W 110 W to 50 W 45 W to 5 W 100 W to 50 W *2 Spurious & Harmonics 80 dB FM Hum & Noise Analog @ 25 kHz 50 (53) *1 dB 50 dB ¦ KPG-94 Analog @12.5 kHz 45 (47) *1 dB 45 dB Keyloader Interface Cable Microphone Impedance 600 . Audio Distortion Less than 2% Modulation 16K0F3E, 11K0F3E, 8K10F1E, 8K10F1D 20K0F7D, 11K2F7D, 14K4F1D, 7K20F1D ¦ VGS-1 Voice Guide & Storage Unit Analog measurements made per TIA/EIA 603 Digital measurements made per TIA/EIA 102CAAA (*1) 148MHz ~ 168MHz All accessories and options may not be available in all markets. (*2) Type 1: 100W to 50W for 450-500MHz. More than 60W to 50W Contact an authorized Kenwood dealer for details and complete for 500-520MHz. list of all accessories and options. Type 2: 100W to 50W for 400-470MHz. Applicable MIL-STD & IP Standard MIL 810C MIL 810D MIL 810E MIL 810F Low Pressure High Temperature Low Temperature Temperature Shock Solar Radiation Rain Humidity Salt Fog Dust Vibration Shock International Protection Standard FleetSync® is a registered trademark of Kenwood Corporation. Windows® is a registered trademark of Microsoft Corporation in the United States and other countries. IMBETM is a trademark of Digital Voice Systems Inc. The P25 Logo is used under license and is a registered trademark of the Project 25 Technology Interest Group. Kenwood follows a policy of continuous advancement in development. For this reason specifications may be changed without notice. Methods/Procedures Methods/Procedures 500.1/Procedure I 501.1/Procedure I, II 502.1/Procedure I 503.1/Procedure I 505.1/Procedure I 506.1/Procedure I, II 507.1/Procedure II 509.1/Procedure I 510.1/Procedure I 514.2/Procedure VIII, X 516.2/Procedure I, II, III, V 500.2/Procedure I, II 501.2/Procedure I, II Cat.A1 502.2/Procedure I, II Cat.C1 503.2/Procedure I Cat.A1,C1 505.2/Procedure I 506.2/Procedure I,II 507.2/Procedure II 509.2/Procedure I 510.2/Procedure I, II 514.3/Procedure I Cat.8,II Cat.3 516.3/Procedure I, IV, V, VI IP54 Methods/Proce...
Ce manuel est également adapté pour les modèles :Radios - FleetSync TK-5810(H) (737.77 kb)