Évaluations - 4, GPA: 3.3
(
)
)
|
Facilité d'utilisation
The Baby Monitor has been designed to provide some added reassurance in the form of sound transmission for those times when you are not in the same room as your baby provided you always stay within hearing range of the baby monitor during use. Your Baby Monitor is not a medical device, nor a device to prevent cases of Sudden Infant Death Syndrome (SID'S) or "cot death", and you should not rely on it for your baby's wellbeing. It is important that you regularly check on your baby personally. Make sure the Baby unit, Parent unit and mains adaptor cables are kept out of reach of your baby and other young children within the house at all times, at least one metre away from the baby’s cot. Never place the baby unit inside your baby’s cot, bed or playpen. Never cover the Parent or baby units with clothes, towels or blankets or any other item. Do not place the cord in a high "wear and tear" location. Never use a frayed or compromised cord. Never use or place your Parent or Baby units in or near moisture or water (e.g. near bath or pool). Immersing in water can cause electric shock and even death. Power requirements In Australia this product requires an electrical supply of 220-240 volts, single phase/alternating current. Use only the mains power adaptors supplied with this equipment. Incorrect adaptor polarity or voltage can seriously damage the unit and/or cause physical harm and even death. The adaptors may become warm during use, please take care when handling. AC Adaptor (Baby unit) AC Adaptor (Parent unit) Input: 240VAC 50Hz Input: 240VAC 50Hz Output: 6VDC 200mA Output: 6VDC 200mA ! CAUTION If you plan to use your Baby monitor whilst travelling overseas, make sure that the voltage shown on the mains power adaptor is the same as the local mains power before connecting to the power supply. Do not use any voltage converter with the monitor. 2 WARNINGS AND SAFETY INFORMATION Battery requirements Each parent unit requires two rechargeable Ni-MH batteries, size AAA 1.2V 800mAh (HR10/44). • Do not dispose of the batteries in a fire, as they can explode. • Do not open, unscrew or temper with any of your baby monitor units or battery. Always carry out repairs through your authorised ORICOM representative or other duly qualifi ed tradesperson. • Released electrolyte from the battery is corrosive and can cause damage to the eyes or skin. It can be toxic and fatal if swallowed. If there is any sign of poisoning, immediately call emergency 000. • When your Baby Monitor is not in use, it is recommended that you disconnect it from the mains supply and remove the batteries. • Observe the proper polarity, or direction, of any battery. Reverse insertion of the battery cell can result in leakage or explosion and in turn harm or even death. • The Ni-MH batteries supplied with this product may be able to be recycled once they are unable to recharge during normal operation. Always observe your local Council /State regulations regarding the disposal of your packaging materials, exhausted batteries, and old equipment. • Always recycle where possible. Do not use your baby monitor in an explosive hazard area such as where there is gas leaking. • As there is a slight chance that the product could be damaged by an electrical storm, it is recommended that users unplug from the mains supply during an electrical storm. Cleaning and care The surface of the case can be cleaned with a dry, soft, lint-free cloth. Never use cleaning agents, particularly aggressive solvents. Apart from occasional cleaning of the case, no other care is necessary. GETTING STARTED GETTING STARTED 3 Thank you for choosing this monitor from Oricom. Installation Your Secure 200 Baby Monitor offers the best Digital Technology. For the Parent Unit INTERFERENCE FREE FREQUENCY DECT (Digital Enhanced Cordless Telecommunications) is the most widely used worldwide digital cordless technology, offering amazingly clear sound, long range and maximum voice security. DECT operates on the 1.8Ghz frequency which eliminates potential interference from other common wireless devices such as cordless telephones, wireless networks (Wi-Fi), Bluetooth and cordless computer devices. Pack Contents • Parent unit (receiver) • Baby unit (sender) • Mains adaptor with charger pod • 2 x NiMH rechargeable batteries (type AAA, 800mAh) • Mains adaptor with power cord clip 1. Remove the Belt Clip by lifting the clip at the top and sliding it downwards. 2. Then remove the battery cover on the back of the Parent Unit by pressing and sliding it down. Insert the rechargeable batteries (supplied) as marked on the unit and close the cover battery cover again. 3. Place the Parent Unit into the Charger Pod. 4. Plug the mains adaptor into a mains power socket. The red charger light on the charger pod will illuminate indicating that the Parent Unit is charging. (the light will remain on to ensure optimum charge is maintained). DO NOT USE STANDARD/ALKALINE BATTERIES IN THE PARENT UNIT, AS THERE IS A RISK OF EXP...