Évaluations - , GPA:
(
)
)
Fabricant : Philips
Taille : 1.78 mb
Nom Fichier : scd463_00_dfu_swe.pdf
Langue d'enseignement: 
Le document est chargé, s'il vous plaît patienter
 |
Le document est chargé, s'il vous plaît patienter
Facilité d'utilisation
148TR SU 2 B. Parent unit A. Baby unit B. Parent unit A. Baby unit EN Legend of functions A. Baby unit A-1 On/Off button A-2 DC 9V — ——< <<+ ++ power supply jack A-3 AC power adapter A-4 Power plug A-5 Microphone A-6 POWER light A-7 Microphone sensitivity switch A-8 Channel selection switch A-9 Battery compartment cover B. Parent Unit B-1 Loudspeaker B-2 LINK light B-3 AC power adapter B-4 Power plug B-5 DC 9V — ——< <<+ ++ power supply jack B-6 LINK alarm switch B-7 Channel selection switch B-8 ON/OFF switch / VOLUME control B-9 POWER light B-10 Battery compartment cover C.What else you’ll need – Coin (to open the battery compartment of the baby unit) – Small, flat screwdriver (to set the channel selection switches) – 4 x 1,5 V AA batteries for the baby unit (optional, we recommend Philips Alkaline batteries) – 4 x 1.5 V AA batteries for the parent unit (optional, we recommend Philips Alkaline batteries) Contents EN 3 Illustrations 4 Legend of functions 4 Baby unit 4 Parent unit 4 What else you need 5 Contents 6 Welcome 6 Safety information 7 Getting your baby monitor ready 7 Baby unit 7 Parent unit 8 Using your baby monitor 9 Other features 9 Avoiding interference 10 Adjusting microphone sensitivity 11 Switching the LINK alarm on and off 12 Troubleshooting 14 Frequently asked questions 14 Technical specifications 15 Important information 15 Environmental information 15 Maintenance 15 Need help? EN Welcome Philips is dedicated to produce caring, reliable products to give parents the reassurance they need.With this baby monitor you can hear your baby from where ever you are in and around your house.With sixteen different channels options you will experience minimal interference. Philips Baby Care, taking care together Safety information Please read this user manual carefully before using your baby monitor and keep it for future reference.This baby monitor is intended as an aid. It is not a substitute for responsible and proper adult supervision and should not be used as such. • Make sure the baby unit and adapter cable are always out of reach of the baby (at least 1 meter / 3 feet away). • Never place the baby unit inside the baby’s bed or playpen. • Never cover the baby monitor (with a towel, blanket, etc.). • Never use the baby monitor in moist places or close to water. • Check if the voltage indicated on the type plate of the adapters (A-3, B-3) correspond to the local power voltage before connecting to the AC power supply. • Do not expose the baby monitor to extreme cold, heat or light (e.g. direct sunlight). • To prevent electric shock, do not open the inside of the baby unit and parent unit (except for the battery compartment cover). • The antennas on both units are fixed; do not try to extend them. Getting your baby monitor ready EN Baby unit The baby unit can be mains or battery operated. When batteries are installed, you have an automatic back up in case of mains failure. Mains operated use 1 Connect the power adapter cord to the power supply jack (DC 9V — ——< <<+ ++ -A-2) of the baby unit. 2 Connect the AC power adapter (A-3) to a wall outlet. . The baby unit is now ready for mains operated use. Battery operated use 1 Remove the battery compartment cover (A-9) of the baby unit, using a coin. 2 Insert four 1,5V AA batteries, noting the + and – configuration inside the battery compartment (batteries are not supplied, we recommend Philips Alkaline batteries). 3 Close the battery compartment cover (A-9), using a coin. . The baby unit is now ready for battery operated use. Parent unit The parent unit can be mains or battery operated. When batteries are installed, you have an automatic back up in case of mains failure. Mains operated use 1 Connect the power adapter cord to the power supply jack (DC 9V — ——< <<+ ++ - B-5) of the parent unit. 2 Connect the AC power adapter (B-3) to a wall outlet. . The parent unit is now ready for mains operated use. EN Getting your baby monitor ready Battery operated use 1 Remove the battery compartment cover (B-10) of the parent unit, by sliding down the cover. 2 Insert four 1,5V AA batteries, noting the + and – configuration inside the battery compartment (batteries are not supplied, we recommend Philips Alkaline batteries) 3 Slide the battery compartment cover (B-10) back in place until it clicks in position . The parent unit is now ready for battery operated use. Using your baby monitor 1 Position both units in the same room to test the connection. Make sure the baby unit is at least 1 meter / 3 feet away from the parent unit. 2 Press the ON/OFF button (A-1) to switch on the baby unit. > The POWER light (A-6) lights up green. 3 Switch on the parent unit using the ON/OFF switch (B-8) and adjust the volume to the level you prefer using the VOLUME control (B-8). > The POWER light (B-9) lights up green. > When connection has been established between the units, the LINK light (B-2) on the parent unit lights up green. Using your baby monitor EN 4 Position the baby unit at l...