Évaluations - 3, GPA: 3.7
(
)
)
|
Facilité d'utilisation
3.2 Power on/off the baby unit Provided the baby unit is off, press and hold 0until the Power Indicator is on. The baby unit is now powered on. Provided the baby unit is on, press and hold 0until the Power Indicator is off. The baby unit is now powered off. NOTE If you place the parent and baby units too close together, you will hear a high pitched noise, this is normal. The units are designed to be located at a distance from one another, e.g. in separate rooms. 3.3 Adjust speaker volume There are 6 volume levels on the parent unit, including VOLUME OFF. 1. Press or on the parent unit to access the current volume level. 2. Press to increase or to decrease the volume of the parent unit respectively. USING YOUR BABY MONITOR 9 4. DISPOSAL OF THE DEVICE (ENVIRONMENT) At the end of the product lifecycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user’s guide and/or box indicates this. Some of the product materials can be re-used if you take them to a recycling point. By reusing some parts or raw materials from used products you make an important contribution to the protection of the environment. Please contact your local authorities in case you need more information on the collection points in your area. Dispose of the battery pack in an environmentally-friendly manner according to your local regulations. 5. CLEANING Clean MBP11 with a slightly damp cloth or with an antistatic cloth. Never use cleaning agents or abrasive solvents. Cleaning and care • Do not clean any part of the product with thinners or other solvents and chemicals - this may cause permanent damage to the product which is not covered by the warranty. • Keep your MBP11 away from hot, humid areas or strong sunlight, and don’t let it get wet. • Every effort has been made to ensure high standards of reliability for your MBP11. However, if something does go wrong, please do not try to repair it yourself - contact Customer Service for assistance. 10 DISPOSAL OF THE DEVICE (ENVIRONMENT) 6. TROUBLESHOOTING Link light on the parent unit does not come on • Check whether the parent unit is powered on. • Check whether the supplied battery pack is correctly installed and that it is not drained. • Recharge the parent unit by connecting it to the power supply. Link light on the parent unit flashes • The parent unit and the baby unit may be out of range with each other. Reduce the distance between the units, but not closer than 1.5 metre. • The baby unit may be switched off. Press and hold 0 key to switch on the baby unit. Low battery light on the parent unit flashes • Battery pack in the parent unit is running low. Connect the parent unit to the mains power with the supplied power adaptor for recharging. The parent unit beeps • Lost connection with the baby unit. Reduce the distance between the parent unit and the baby unit, but not closer than 1.5 metre. • The baby unit may be switched off. Press and hold 0 key to switch on the baby unit. • Battery pack in parent unit is running low. Connect the parent unit to the mains power with the supplied power adaptor for recharging. Cannot hear sound or baby cry from the parent unit • The volume level in the parent unit may be set too low, increase the volume level of the parent unit. Refer to section 3.3 for volume level settings. • The parent unit and the baby unit may be out of range with each other. Reduce the distance between the units, but not closer than 1.5 metre. The baby monitor system produces a high- pitched noise • The parent unit and the baby unit are too close to each other. Make sure the parent unit and baby unit are at least 1.5 metre away from each other. • The speaker volume of the parent unit maybe set too high. Decrease the volume of the parent unit. Battery pack in the parent unit is running low quickly • The volume level of the parent unit may be set too high which consumes power. Decrease the volume level of the parent unit. Refer to section 3.3 for volume level settings. TROUBLESHOOTING 11 7. GENERAL INFORMATION If your product is not working properly... 1. Read this User’s Guide. 2. Visit our website: 3. Contact Customer Service at UK 0845 218 0890 ROI 08187 62092 To order a replacement battery pack for parent unit, contact customer service. Consumer Products and Accessories Limited Warranty ("Warranty") Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International LTD ("BINATONE") What Does this Warranty Cover? Subject to the exclusions contained below, BINATONE warrants that this Motorola branded product ("Product") or certified accessory ("Accessory") sold for use with this product that it manufactured to be free from defects in materials and workmanship under normal consumer usage for the period outlined below. This Warranty is your exclusive warranty and is not trans...