Évaluations - 3, GPA: 3.3
(
)
)
|
Facilité d'utilisation
If you should need to replace the rechargeable battery, contact Fisher-Price®. • Use the power cord only in a wall outlet. Do not plug the power cord into a ceiling light. • Insert the AC adaptor jack into the receiver and then plug into a wall outlet. Full Charge Half Charged No Charge • Charge the rechargeable battery for 10-1 hours. Do not overcharge your battery. After a first-time charge, you will only need to charge the battery for 8 hours for a full charge. Hint: When using the receiver with the AC adaptor, you will be charging the battery while monitoring your baby! 7 Testing Sound Reception Test transmitter transmission and receiver reception each time you change location of use. Power ButtonPower Button ChannelChannel LCD ScreenLCD Screen • Place the transmitter in the room in which you intend to use it. • Press the transmitter power button to turn power on. Power indicator lights and the LCD screen turns on. • Press the channel buttons on the transmitter to select a channel. • Look at the LCD screen to see which channel you have selected (you will adjust the receiver channel to the same channel). Turn on a radio. 8 Testing Sound Reception On/Off/Volume DialOn/Off/Volume Dial LCD ScreenLCD Screen • Place the receiver in the room in which you intend to use it. • Rotate the receiver on/off/volume dial to turn power on. The LCD screen turns on. • Look at the LCD screen to see current channel selected. • Press the channel button on the receiver to select the same channel as the transmitter. • Adjust receiver location. 9 Testing Sound Reception Good Reception No Reception/Out of Range Check reception! If you see bars on the LCD, you have reception. If you are out of range, the reception display will blink and you will hear a low pitched beep. Full Charge Half Charged No Charge Check to be sure there is enough battery power. Hint: You will hear a high pitched beep if battery power is low. We recommend using the AC adaptor for power source (and you’ll charge the battery too). 10 Testing Sound Reception • Sound lights on the receiver turn on when sound is received by a receiver. -One or two lights for shallow sounds. -Three or more lights for louder sounds. • If reception is poor, or there is no reception on one channel, change the channel on both units. 11 Setup & Use IMPORTANT! Test sound reception of this monitor before first time use and whenever you change location of transmitter (see page 8). Adjust Channel • Set transmitter channel switch to same channel as the receiver. • Place transmitter in same room with child. Point the microphone directly toward crib or play area. • Unwrap and fully extend power cord for best transmission. Plug power cord into wall outlet. • Use the power cord only in a wall outlet. Do not plug the power cord into a ceiling outlet. • Press the transmitter power button to turn power on. 1 Setup & Use • Place the receiver where you will see or hear it. • If desired, use the AC adaptor. Unwrap and fully extend the AC adaptor cord for best reception. Insert the AC adaptor jack into the receiver socket and plug into a wall outlet. • Rotate the receiver on/off/volume dial to turn the power on. LCD screen turns on. Rotate the on/off/volume dial to adjust volume. 1 Setup & Use • Clip the receiver to your clothes to stay in touch with baby around your house or yard. Hint: Under permitting conditions, the receiver receives sounds up to 244 meters away from baby! 14 Problems & Solutions Problem Solution You hear static or buzzing There may be a physical obstruction or noise level causing interference. Change the location of reciever or try a different channel. Range varies depending on surrounding conditions such as noise levels, physical obstructions and signal interference. Reception display on receiver LCD screen flashes and you hear a low pitched beep Transmitter power is off. Turn transmitter power on. Transmitter and receiver are on different channels. Change both units to the same channel. Loose power cord connection and transmitter power is off. Check transmitter power cord plug-to-outlet connection. No power to wall outlet and transmitter power is off. Make sure light switch that controls power flow to wall outlet is on. Power is off because circuit breaker for room is off. Make sure house fuses and circuit breakers are on. Receiver LCD screen does not turn on Receiver power is off. Turn receiver power on. Battery needs to be recharged. Charge the battery for 8 hours. Or, use the AC adaptor as a power source (and charge the battery at the same time). Power is off because circuit breaker for room is off. Make sure house fuses and circuit breakers are on. No power to wall outlet and power is off. Make sure light switch that controls power flow to wall outlet is on. Receiver(s) LCD screen indicates low battery power and you hear a high pitched beep Battery needs to be recharged. Charge the battery for 8 hours. Or, use the AC adaptor as a power source (and charge the battery at the...