Évaluations - 6, GPA: 4.3
(
)
)
|
Facilité d'utilisation
If AM reception is weak, change the position of cabinet until the internal antenna picks up the strongest signal. FM The FM antenna is built in to the AC power cord. If FM reception is weak try varying the position and direction of the power cord until you find the strongest signal. 9 CK5250_ib043003.p65 9 30/4/2003, 16:29 WAKE TO RADIO 1.) Turn the radio ‘On’and select the band, station, and volume level that you wish to hear when the alarm comes on, then turn the radio ‘Off’again. 2.) Reconfirm the wake up time settings for the alarm you are using, Alarm 1, Alarm 2, or both alarms. 3.) Set the ALM (Alarm) selector switch for one or both alarms to the ‘RADIO’ position. The appropriate Alarm 1 and/or Alarm 2 indicators will light up to confirm that the alarms are set. ALARM 1 indicator ALARM 2 indicator 4.) At the selected wake up time the radio will turn ‘On’. It will play for one hour and then shut off automatically. 5.) To stop the radio sooner, press the RADIO ON/OFF button. The radio will stop but the alarm remains set and will turn the radio on again at the same time on the following day. 6.) If you do not want the alarm to turn the radio on the following day, set the appropriate ALM (Alarm) selector to the ‘OFF’position. WAKE TO BUZZER 1.) Reconfirm the wake up time settings for the alarm you are using, Alarm 1, Alarm 2, or both alarms. 2.) Set the ALM (Alarm) selector switch for one or both alarms to the ‘BUZZER’ position. The appropriate ALARM 1 and/or ALARM 2 indicators will light up to confirm that the alarms are set. 3.) At the selected wake up time the buzzer will sound. It will continue for one hour and then shut off automatically. 4.) To stop the buzzer sooner, press the RADIO ON/OFF button. The buzzer will stop but the alarm remains set and will turn the buzzer on again at the same time on the following day. 5.) If you do not want the alarm to turn the buzzer on the following day, set the appropriate ALM selector to the ‘OFF’position. 10 CK5250_ib043003.p65 10 30/4/2003, 16:29 RADIO AND BUZZER OPERATION You may also set one alarm for wake to radio and the other for wake to buzzer. Just set the ALM 1 and ALM 2 selector switches to the desired positions. SNOOZE ALARM After the radio or buzzer alarm sounds in the morning you may press the SNOOZE Bar for a few more minutes sleep. The alarm will stop for approximately 9 minutes and then turn on again. Note: Whenever the SNOOZE Bar is depressed the display changes from normal time to a “minutes and seconds” display. The minute will be the last digit that appeared in the time display, and the seconds will continue to advance. When the SNOOZE bar is released the display returns to the correct time. 11 CK5250_ib043003.p65 11 30/4/2003, 16:29 NAP TIMER This radio includes a programmable Nap Timer alarm. Use the Nap Timer to wake up after a nap without disturbing your regular alarm settings. The Nap Timer can be used for naps of up to 99 minutes. To set the Nap Timer: 1.) Depress the NAP button. The display will show “n 30”, indicating a 30 minute nap time, and the NAP indicator will light. After 30 minutes the buzzer alarm will turn on. AM indicator NAP indicator 2.) To adjust the length of the Nap Timer depress and hold the NAP button, and repeatedly press either the FWD or REV buttons until the display shows the desired Nap time. You can select between 1 minute and 99 minutes. Note: When you change the length of the Nap Timer setting, the new setting becomes the default setting. For example if you change the Nap Timer from 30 minutes to 45 minutes, the new default setting will become 45 minutes. The next time you press the NAP button the Nap Timer will start at 45 minutes. However if the power is interrupted and the back up battery is not installed, the Nap Timer will return to the original 30-minute default setting. 3.) When the Nap Timer counts down to “00” the buzzer alarm will turn on. Press the SNOOZE button to shut off the buzzer alarm. Note: If you do not press the SNOOZE button to shut the buzzer off, it will continue for one hour and then shut off automatically. To cancel the Nap Timer before the buzzer alarm turns on, press the SNOOZE button at any time. The NAP indicator goes off and the buzzer alarm will not turn on. 12 CK5250_ib043003.p65 12 30/4/2003, 16:29 SLEEP TO MUSIC TIMER You can program the Sleep Timer to play the radio for up to 99 minutes and then shut off automatically. 1.) Depress the SLEEP button. The display will show “L 30”, the radio will turn on, play for 30 minutes and then turn off automatically. 2.) To adjust the length of the Sleep Timer depress and hold the SLEEP button, and repeatedly press either the FWD or REV buttons until the display shows the desired Sleep time. You can select between 1 minute and 99 minutes. Note: When you change the length of the Sleep Timer setting, the new setting becomes the default setting. For example, if you change the Sleep Timer from 30 minutes to 45 minutes, the default setting wil...