Évaluations - 4, GPA: 3.8
(
)
)
|
Facilité d'utilisation
The display will change from correct Time to Wake Up Time and the DAY OF WEEK indicators will show you the Alarm Mode which is currently selected. Release the ALARM 1 or ALARM 2 setting buttons to return to correct Tme. 12 CKS1855_053007.p65 12 30/5/2007, 14:16 Listening To The Radio Digital Radio Frequency Display This clock radio features a digital radio frequency display instead of a dial scale to make tuning easier, especially in a dark room. The LED time display automatically changes to a radio frequency display as soon as you begin turning the TUNING control. And the display automatically changes back to the correct time within 10 seconds after you release the TUNING control. 1.) Set the Band AM/FM selector switch to the desired band, AM or FM. 2.) Set the VOLUME control to a low setting. 3.) Press the RADIO ON/OFF button to turn the radio ‘On’. The display changes from time to an AM or FM radio frequency display. 4.) Turn the TUNING control to the left- side to select higher numbered frequencies or to the right-side to select lower numbered frequencies. (High Low) Important: It is not necessary to tune to the exact frequency of your desired station. Just rotate the TUNING control until you find the strongest signal and the best reception, even if the frequency number on the display is higher or lower than the actual station frequency. Within 10 seconds after you release the TUNING control the display automatically changes back to the correct time. 5.) Adjust the VOLUME control to the desired setting. 6.) When you are finished listening, press the RADIO ON/OFF button to turn the radio ‘Off’. 13 CKS1855_053007.p65 13 30/5/2007, 14:16 14 Antenna Information AM – The AM bar antenna is inside the cabinet. If AM reception is weak, change the position of cabinet until the internal antenna picks up the strongest signal. FM – The FM antenna is built in to the AC power cord. If FM reception is weak try varying the position and direction of the power cord until you find the strongest signal. CKS1855_053007.p65 14 30/5/2007, 14:16 Wake To Radio 1.) Turn the radio ‘On’ and select the band, station, and volume level that you wish to hear when the alarm comes on, then turn the radio ‘Off’ again. 2.) Reconfirm the wake up time and alarm mode settings for the alarm you are using, Alarm 1, Alarm 2, or both alarms. 3.) Set the ALARM selector switch for one or both alarms to the “RADIO” position. The appropriate ALARM 1 and/or ALARM 2 indicators will light up to confirm that the alarms are set. 4.) At the selected wake up time the radio will turn ‘On’. It will play for one hour and then shut off automatically. 5.) To stop the radio sooner, press either the appropriate ALARM 1 or ALARM 2 button, or press the RADIO ON/OFF button. The radio will stop but the alarm remains set and will turn the radio on again at the same time on the following day (depending on the Alarm Mode setting). 6.) If you do not want the alarm to turn the radio on the following day, set the appropriate ALARM selector to the “OFF” position. 15 CKS1855_053007.p65 15 30/5/2007, 14:16 Wake To Buzzer (Crescendo Alarm) Note: Alarm 1 and Alarm 2 have different buzzer sounds. •Alarm 1 is a “Single beep” sound. •Alarm 2 is a “Double beep” sound. You will be able to tell which alarm is going off by the sound that it makes. 1.) Reconfirm the wake up time and alarm mode settings for the alarm you are using, Alarm 1, Alarm 2, or both alarms. 2.) Set the ALARM selector switch for one or both alarms to the “BUZZER” position. The appropriate ALARM 1 and/or ALARM 2 indicators will light up to confirm that the alarms are set. 3.) At the selected wake up time the buzzer will sound. It will begin softly and gradually increase in volume to wake you up. It will continue for one hour and then shut off automatically. 4.) To stop the buzzer sooner, press either the appropriate ALARM 1 or ALARM 2 button. The buzzer will stop but the alarm remains set and will turn the buzzer on again at the same time on the following day (depending on the Alarm Mode setting). To stop the buzzer and turn on the radio immediately, press the RADIO ON/ OFF button instead of the ALARM 1 or ALARM 2 button. 5.) If you do not want the alarm to turn the buzzer on the following day, set the appropriate ALARM selector to the “OFF” position. 16 CKS1855_053007.p65 16 30/5/2007, 14:16 Radio And Buzzer Operation You may also set one alarm for Wake To Radio and the other for Wake To Buzzer. Just set the ALARM 1 and ALARM 2 selector switches to the desired positions. Snooze Alarm After the radio or buzzer alarm sounds in the morning you may press the SNOOZE Bar for a few more minutes sleep. The corresponding ALARM indicator will flash. The alarm will stop for approximately 9 minutes and then turn on again. The Snooze operation maybe repeated several times if desired, but after one hour the alarm will not turn on again. 17 CKS1855_053007.p65 17 30/5/2007, 14:16 Sleep To Music Timer You can program the sleep ti...