Évaluations - 3, GPA: 3.3
(
)
)
|
Facilité d'utilisation
2. Insert 2 "D" size (UM-1 or equivalent) batteriesinto the battery compartment,making sure that thebatteries are installed with the proper polarities(+ and -). AC Supply1. Make sure the Voltage Selector is set to thecorrect position. Connect the AC cord to the AC socket and the wall socket. The set is now ready to use. 2. To switch off the set completely, pull the AC cord from the wall socket. To prevent possible damage to this unit: * Load new batteries with their polarities ( + and -) aligned correctly. * Do not apply heat to batteries, or internal short- circuit may occur. * If this unit is not to be used for a long period of time , remove all batteries and store them in a cool and dry place. * Remove dead batteries immediately and disposeof them. * Do not use old and new batteries together. Also never use an alkaline battery with a manganeseBattery. * Battery lifeIf the sound becomes low or distorted, replace allof the batteries with new ones. RADIO OPERATION -----------------------------------1. Rotate the volume dial to turn the radio on and adjust to the desired sound level. 2.Select the preferred frequency band(FM/AM/SW1/SW2) by silding the band switch 3. Rotate the tuning dial to tune to the desiredstation.The display shows the frequency. 4. Adjust the antenna (See ANTENNAS). 5. To switch off the radio,rotate the volume dial until a click is heard. CLOCK FUNCTION-------------------------------TO SET THE TIME 1. Press and hold the TIME SET button, and press the HOUR button until the correct hour is shown. * Ensure that the AM/PM is set properly. 2. While holding the TIME SET button, press theMINUTE button until the correct minute is shown. TO SET THE ALARM TIME 1. Press and hold the ALARM SET button, and a " " Will appear on the display to identify thealarm time. While holding the ALARM SET button, press the HOUR button until the desired hour is shown. * Ensure that the AM/PM is set properly. FM AM SW1-2 HELPFUL HINTS ----------------------------------* If the set is not used for a long period of time, Remove the batteries to prevent potential damagedue to possible battery leakage. * Do not subject the set to temperatures over60 C(140 F) because characteristics of the internalparts may be adversely affected by heat. Neverleave the set in a car exposed to direct sunlightfor a long period of time with the doors andwindows closed . The cabinet may becomedeformed and deterioration of the performancemay result. * Since a strong magnet is used for the speaker, keep magnetized commuter passes , tickets orpersonal credit cards, recorded tapes, watchesetc. away from the radio. The speaker magent inthe radio may damage them. * Do not place the set near strong magnets suchas those used in radio, television sets, speakerboxes etc. as these may cause the frequency todrift. * Do not drop or subject the set to a strong impact since the set is composed of precision parts. * When listening in a train, car or building, use theRadio near a window to obtain reception.Reception may be difficult in a tunnelor subway. Also note that operating the radio ona metal object may adversely affect reception. * Do not use benzene, thinners or any abrasive 2. While holding the ALARM SET button, press theMINU E button until the desired minute is shown. 3. After setting the alarm time, turn on the radio, select the station, and turn the unit off. 4. Press the ALARM ON/OFF button, a " " will appear on the display. The radio will turn itself onat the alarm time. ANTENNAS FM: Pull out the Telescopic Antenna and adjust its Length and angle for optimum reception. AM : The sensitive ferrite core antenna inside the set will provide excellent AM reception in most areas. Turn the set in the direction which gives the bestresults because the ferrite core antenna is directional. SW1-2: Fully and vertically extend the telescopic antenna. T OperatingInstruction AM/FM/SW1/SW2 4 BAND RADIO WITH ALARM CLOCK powder to clean the cabinet. Wipe it with a soft clothmoistened with a mild soap and water solution. * Avoid spray-type insecticides. Some insecticidescontain chemicals that could cause cabinet deformation. -------------SPECIFICATIONS --------------------Power Source: 2 "D" size/UM-1 batteries (DC 3V) Frequency Range: AM: 530 - 1710 KHz FM: 87.5-108.0 MHz SW1: 6.0 - 12 MHz SW2: 12 - 18 MHz Speaker: 8 3W Power Output: 150mW (RMS. Max.) Output Jack: Earphone 32 ----------------------------------------------------------------------* Design and Specifications are subject to changewithout notice. For recycling or disposal information about thisproduct, please contact your local authorities or theElectronics lndustries Alliance: ( ( ( ( ( ( 1 10 65 124 2 3 13 FM MW SW1 SW2 HOUR MIN TIME SET LIGHT ALARM SET ALARM ON/OFF POWER FM/MW/SW1/SW2 4 BAND DIGITAL RADIO AM ( ( ( ( ( ( 11 14 7 8 9 15 HOUR MIN TIME SET LIGHT ALARM SET ALARM ON/OFF AM HOUR MIN TIME SET LIGHT ALARM SET ALARM ON/OFF AM HOUR MIN TIME SET LIGHT ALARM SET ALARM ON/OFF AM ( (...