Évaluations - 3, GPA: 3.7
(
)
)
|
Facilité d'utilisation
Press and hold in AM or FM radio mode to save the current radio station to the clock radio’s memory. AL1/M-/AL2/M+ With the power off, press and hold to adjust the alarm time. Press repeatedly to adjust the alarm source. With the power on, press to cycle through saved AM or FM radio stations. TUNING/HOUR/ MIN Press to adjust the AM or FM radio station. Press to adjust the hour or minute when setting the time or alarm. BASS Press to turn the bass mode off or on. SOURCE Press to switch between iPod, AUX, AM, and FM modes. POWER Press to turn the clock radio off or on. VOLUME Press to adjust the volume. CLOCK SET With the power turned off, press and hold the clock set button to set the time. SNOOZE Press, after the alarm sounds, to delay the alarm for an additional 9 minutes. DC POWER INPUT AM ANTENNA INPUT FM WIRE ANTENNA DISPLAY RESET Press using a paperclip or like object to reset the clock radio to it’s original settings. SUBWOOFER OUTPUT VIDEO OUTPUT LINE INPUT (3.5mm) SETUP Power Plug the AC/DC power adapter (included) into the DC POWER INPUT and a standard AC power outlet to power the clock radio. Battery Backup Requires 2 AAA batteries (not included) AM Loop Antenna Plug the AM Loop Antenna (included) into the AM ANTENNA INPUT to receive AM radio reception. CLOCK Setting the Clock Setting the Sleep Timer 1 Press the POWER button to turn the clock radio off. 2 Press and hold the CLOCK SET button. 3 While holding the CLOCK SET button, press the HOUR and MIN buttons to adjust the hour and minute. 4 After the desired time is set, release the CLOCK SET button to finish setting the time. 1 With the clock radio powered on and playing, press the SNOOZE button repeatedly to set the sleep timer. 2 After the set amount of time has expired the clock radio will automatically power off. Setting the Alarm 1 Press the POWER button to turn the clock radio off. 2 Press and hold the AL1 or AL2 buttons. 3 While holding the AL1 or AL2 buttons, press the HOUR and MIN buttons to adjust the hour and minute. 4 After the desired alarm time is set, release the AL1 or AL2 buttons. 5 Press the AL1 or AL2 buttons to adjust the alarm source between BUZZER, RADIO, iPod, or OFF. IPHONE/IPOD Docking an iPhone/iPod 1 Locate the numbered bracket that fits the iPhone/iPod model that will be docked. Each included bracket has a number on it, indicating which iPhone/iPod model that bracket is compatible with. See the separate bracket chart page to identify which bracket is needed. 2 Snap the bracket into place over the iPhone/iPod connector in the dock for iPhone/iPod. 3 Connect the iPhone or iPod to the connector inside the Dock for iPhone/iPod. When the speaker is plugged in, using AC power, the docked iPhone or iPod will charge. Playing an iPhone/iPod 1 Follow the instructions for docking an iPhone/iPod. 2 Press the POWER button to turn the clock radio on. 3 Press the SOURCE button to switch to iPod mode. 4 Press the PLAY/PAUSE button to begin playing music from the docked iPhone or iPod. RADIO, INPUTS, & OUTPUTS Playing the AM/FM Radio Line Input 1 Press the POWER button to turn the clock radio on. 2 Press the SOURCE button to switch to AM or FM radio mode. 3 Press the TUNING buttons to adjust the AM or FM radio station. Requires a 3.5mm line input cable (not included). 1 Connect a line input cable to the LINE INPUT and an MP3 player. 2 Press the POWER button to turn the clock radio on. 3 Press the SOURCE button to switch to AUX mode. 4 Use the native controls on the connected MP3 player to play audio through the clock radio. Saving an AM/FM Radio Station 1 Follow the instructions for PLAYING THE AM/FM RADIO. 2 Press the TUNING buttons to tune to the desired station. 3 Press and hold the MEM/DIM button. 4 Press the TUNING buttons to select a memory preset. 5 Press the MEM/DIM button to save the current station to the select memory preset. Video Output Requires a RCA video cable (not included). 1 Follow the instructions for DOCKING AN iPhone/iPod and PLAYING AN iPhone/iPod. 2 Make sure “TV Out” is set to “On” in the video settings of the docked iPhone or iPod. 3 Connect a RCA video cable to the VIDEO OUTPUT on the clock radio and a video input on a television. 4 Adjust the television to the correct input setting. 5 Videos played through the docked iPhone or iPod will now play on the connected television. Playing a Preset Radio Station 1 Follow the instructions for PLAYING THE AM/FM RADIO and SAVING AN AM/FM RADIO STATION. 2 Press the M- and M+ buttons to cycle through preset radio stations. Subwoofer Output Requires a RCA audio cable (not included) 1 Connect a RCA audio cable to the SUBWOOFER OUTPUT ont he clock radio and an input on a subwoofer. COMPANY INFORMATION Green Initiative Environmental Commitment to ‘Protect for Today and Sustain for Tomorrow’ 2009 marks the official launch of DPI, Inc.’s corporate campaign for a greener and cleaner world. DPI and its four brands, iLive, WeatherX, Capri, and GPX, are building upon environmental...
Ce manuel est également adapté pour les modèles :récepteurs radio - ICP310B (692.74 kb)