Évaluations - 3, GPA: 5
(
)
)
|
Facilité d'utilisation
Installing iPod Insert Your iH22 comes with 3 inserts to ensure your iPod fits properly in the dock on the top of the system. If the inserts that come with the unit do not match your iPod model, use the insert that came with your iPod or visit or call 1-800-288-2792 toll free to purchase the proper insert for our iPod model. To place an insert: 1. Select the insert for your iPod. Using the correct insert ensures the proper fit to your iPod. 2. Gently press the iPod insert into the dock. 3. Carefully place your iPod into the dock. The iPod must not be in a case or “skin”. 4. To remove/replace an insert, first remove your iPod then press down the insert latch, grip the insert and pull gently upwards. 3 Using the iH22 This unit is a PRESET Clock: the time is already preset at the factory. Simply match the time zone setting to where you live. 1. Depending on your location and whether or not Daylight Saving Time (DST) is in effect, set the DST Switch located on the back of the unit to +1 to add an hour or to -1 to subtract an hour to/from the currently displayed time. 2. Press and hold the Time Zone Button located on the back of the unit until the current time zone flashes. Press the or Button to select your time zone. 3. Press the Time Zone Button again (or no button within 10 seconds) to exit the setting mode. 4. If time displayed is not correct, see Setting Time and Calendar to set the clock. Setting Time and Calendar 1. Press and hold the Clock Adjust Button located on the back of the unit until the current time flashes on the display. Press the or Button to adjust to correct time (holding the button for few seconds will advance or reverse rapidly). 2. Remember to set the correct AM or PM time. The PM Indicator is located above the minute digits. 3. Press the Clock Adjust Button again to adjust year. Press the or Button until the current year is displayed. 4. Press the Clock Adjust Button again to adjust month and date. Press the or Button until the current month/date is displayed. Holding the button for a few seconds will advance or reverse rapidly. 5. Press the Clock Adjust Button again (or no button within 10 seconds) to exit the time/calendar setting mode. You will hear two beeps to confirm Time and Calendar setting are completed. Using the Alarms Setting the Alarms 1. By default, the unit selects iPod as your wake source. If no iPod is docked or detected, the iH22 will automatically default to buzzer alarm. Note: make sure you have an hour of audio on your iPod. 2. Press and hold the Button until the current alarm time flashes in the lower part of the display. Press the or Button to set the alarm time. Remember to set the correct AM or PM time. 3. Press the Button (or if no button is pressed within 10 seconds). Two beeps will confirm alarm time and exit alarm setting mode. The alarm will be armed and the corresponding alarm icon will appear. 4. To set Alarm 2 just follow steps 2 - 3 using the Button. Reviewing, Arming and Disarming Alarm (Turn Alarm Function On and Off) 1. Once an alarm is set, it is armed and the lower part of the display will show the alarm time. If both alarms are armed, the earliest alarm time will show. 2. To arm/disarm the alarm, just press the associated alarm button to toggle it on or off. If the alarm is armed, the related alarm icon will appear in the upper part of the display. Resetting the Alarm to Come on the Next Day 1. When the alarm is sounding, press the Button to stop alarm and reset it to come on the following day. 4 Using the iH22 Snooze Operation 1. Press and hold the Snooze/Dimmer Button for a few seconds to set snooze time. Press the or Button to set the snooze timer from 1 to 30 minutes. 2. Press the Snooze/Dimmer Button after the alarm sounds. The alarm will be silenced and come on again after the set snooze time. Snooze can be pressed several times during the 1 hour alarm cycle. Sure Alarm The iH22 has a sure alarm feature. If backup batteries are installed, the buzzer alarm will still sound in the event of power failure. Charging your iPod Note: Please make sure you are using the correct insert for your iPod (see Installing iPod Insert) and that the iPod is properly docked into the iH22. Failure to do so may damage your iPod. 1. While your iPod is docked in the unit and the unit is connected to AC power, it recharges (until fully charged). Back up batteries will NOT charge iPod. Note that non-docking iPod models will NOT charge. Listening to your iPod 1. Dock your already playing iPod. The iH22 will automatically turn on and you will hear the music playing from your iPod. Note: If the volume on the playing track is too low, iH22 may not detect that your iPod is in play mode. If this happens, press the Button on the main unit to play it. 2. When the iPod is docked and in standby mode, press the Button on the iH22 to play it. The will appear on the display, indicating iPod play mode. 3. Press the Button again to pause play; press again to resu...
Ce manuel est également adapté pour les modèles :récepteurs radio - iH22 (263.62 kb)