Évaluations - 1, GPA: 3
(
)
)
|
Facilité d'utilisation
When the unit is set to “Search by Scanning”, it will continuously search through the presets (A, B, C) or all the available channels (in five (5) second intervals) in the direct mode until the Search button, Rotary/ Select Knob or the (XM) Select button on the remote control is pressed to confirm the selection. 49 Figure 39. Category Search Screen Figure 40. Scanning Search Screen 50 Memory This feature allows the user to program into memory favorite song titles, artist names and channel information. To make an entry, press the memory (mem.) button and a “Saved in Memory” confirmation screen will appear (see Figure 41). Up to 20 entries can be stored. When 20 entries have been stored any new information that is saved will replace the oldest entry in memory. Figure 41. Memory Selection Screens 51 To recall the saved information, press and hold the memory (mem.) button for three (3) seconds and the MEMORY RECALL screen will be displayed (see Figure 42). If there is more than one (1) entry in memory, use the Rotary/Select Knob or the remote control UP and DOWN buttons to scroll through all stored entries. To exit this mode, either press the Menu button twice or Jump button once. This mode will also time-out after 10-seconds and return to the active screen. Figure 42. Memory Selection Screens Pre./Dir The Pre./Dir button determines whether the numbered buttons 0 through 9 will operate as a keypad for entering station numbers directly, or as presets (A, B, C) used to select stations. The unit informs the operator by displaying the selected mode (DIRECT, PRESET A, PRESET B, PRESET C) on the top line of the display. 52 Numbered Buttons 0-9 The numbered buttons (0 through 9) provide the operator with a means of selecting stations by entering the station number when the unit is set to DIRECT, or selecting preassigned stations when the unit is set to operate in PRESET (A, B, C). Direct When the unit is set to operate in this mode, station selection can be accomplished by entering its number directly. (e.g., to select station #23, press 23.) The unit will display the following screen and change to the desired station 2 seconds later. Figure 43. Direct Channel Entry Screen Preset (A, B, C) The unit has the capability of storing three sets of 10 preassigned stations for a total of 30 preassigned stations. To assign a station to a number button, tune in the desired station and hold down the desired number button until the unit signals acceptance by issuing one short beep and displaying a screen to confirm for about 1 second. 53 Turning The Xpress Unit OFF To turn the Xpress XM® unit OFF, press the power button on the unit or on the remote control. The following screen will appear, the curved lines on either side of the XM® logo gradually disappear and the unit will shut down. Figure 44. Exit Screen Remote Control Remote Control Features The wireless remote control supplied with the Xpress XM® unit is capable of operating most of the features from a remote location. Each button on the remote control functions in the same way as the button on the Xpress XM® unit. For a full description of a keypad button and function refer to the preceding sections in this manual. For optimal operation of the remote control, always aim it toward the Remote Sensor on the front panel of the main unit. 54 (+) Button (-) Button (+) Button (-) Button Figure 45. Xpress Receiver Remote Control Menu Button (menu) – The MENU button is used to access “Main Menu” options which allows the user to make feature function adjustments and set personal preferences. Upon entering the main menu mode, use the UP and DOWN buttons to highlight the desired function. Press the (XM) SELECT button to confirm the selection. 55 Select Button (XM) – This button is used to confirm a desired channel/ category selection and various menu options. This button is also used to program the ARTIST/SONG into the Tune Select feature by pressing and holding for two (2) seconds (see Tune Select 7). Mute Button (mute) – This button is used to mute and un-mute the selected audio. Jump Button (jump) – This button allows the user to jump from the current channel to a previous channel (i.e., switch between current and previous channel). Number Buttons (0-9) – These buttons are used to select preset numbers and to directly enter a channel number. Memory Button (mem) – This button allows the user to capture and store the current program data information (Artist & Song Title). You can store up to 20 artist/song title combinations. Display Button (disp) – This button allows the user to choose one of four (4) different formats presenting the Artist, Song Title and data service information on the LCD screen. Pressing the Display button while viewing the active display switches between the artist name/song title with data service ticker (sports, stock options, etc.) screen. When the letter size changes, the field will scroll. This feature is useful when viewing the display at a distance. Pres...