Évaluations - 2, GPA: 3
(
)
)
|
Facilité d'utilisation
Before connecting to power cord to AC outlet, make sure the setting postion of this switch matches • Set has been shipped in the 220-230V and 50Hz position. To use on 120V and 60Hz, remove the plug adaptor and change switch position. NOTE: Do not connect the unit to the AC power supply until are selected. “NO WORRY” BATTERY BACKUP This clock radio is equipped with a memory holding system that can with a customer-installed 9-volt alkaline battery (not included). The power failure protection circuit will not operate unless battery is installed. When normal household power is interrupted, or AC line cord is unplugged, the battery will power the clock radio to keep track of time and alarm settings pro-grammed into memory. When on battery power, the digital display will not light; however, should WAKE TIME occur during the power interruption, the radio will operate or the alarm will sound if remaining battery power is adequate. Normal operation will resume after AC power is restored so you will not have to reset time or alarm. ATTENTION: FOR YOUR SAFETY 120V 60HZ • This product provides with an AC voltage • The AC voltage selector switch on the the voltage that prevails in the area to which 220V-230V 50Hz shipped. Before connecting to power cord to AC outlet, make sure the setting postion of this switch matches • Set has been shipped in the 220-230V and 50Hz position. To use on 120V and 60Hz, remove the plug adaptor and change switch position. NOTE: Do not connect the unit to the AC power supply until are selected. “NO WORRY” BATTERY BACKUP This clock radio is equipped with a memory holding system that can with a customer-installed 9-volt alkaline battery (not included). The power failure protection circuit will not operate unless battery is installed. When normal household power is interrupted, or AC line cord is unplugged, the battery will power the clock radio to keep track of time and alarm settings pro-grammed into memory. When on battery power, the digital display will not light; however, should WAKE TIME occur during the power interruption, the radio will operate or the alarm will sound if remaining battery power is adequate. Normal operation will resume after AC power is restored so you will not have to reset time or alarm. AM/FM Clock Radio with Large LED Display RP-4806 u s e r m a n u a l FOR YOUR SAFETY The AC power plug is polarized (one blade is wider than the other) and only fits into AC power outlets one way. If the plug won’t go into the outlet completely, turn the plug over and try to insert it the other way. If it still won’t fit, contact a qualified electrician to change the outlet, or use a different one. Do not attempt to bypass this safety feature. IMPORTANT BATTERY INFORMATION • When storing the unit or unplugging it from the AC outlet for a day or more, be sure to remove the battery because it can leak and damage the unit. • Batteries may leak electrolyte if inserted incorrectly, if disposed of in fire, or if an attempt is made to charge a battery not intended to be recharged. • Discard leaky batteries immediately. Leaking batteries can cause skin burns or other personal injury. • Dispose of batteries, according to federal, state, and local regulations. SERVICE INFORMATION • This product should be serviced only by those specially trained in appropriate servicing techniques. • If you cannot use the flag-pin power plug provided, you can use the round-pin plug-on adaptor. WARNING: TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. THE LIGHTNING FLASH AND ARROWHEAD WITHIN THE TRIANGLE IS A WA RNING SIGN ALERTING YOU OF "DANGEROUS VOLTAGE" INSIDE THE PRODUCT. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING T O QUALIFIED SER VICE PERSONNEL. THE EXCLAMATION POINT WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU OF IMPORT ANT INSTRUCTIONS ACCOMP ANYING THE PRODUCT. SEE MARKING ON BOTTOM / BACK OF PRODUCT 10330 N. meridian St., Indianapolis, IN 46290 © 2000 Thomson Consumer Electronics, Inc. Trademark(s) ® Registered Models RP4806 Marca(s) Registrada(s) 55084530 (Rev. 0 EN/E/P) RP4806 Eng 1 Install battery as follows: 1. Remove battery compartment door (located on the back of the radio) by applying thumb pressure to area indicated on battery door and then lift the door out and off the cabinet. 2. Connect a 9-volt battery to battery connector plug. 3. Insert battery in compartment and replace compartment door. NOTE: Alkaline (NEDA 1604A) batteries are recommended. Carbon-zinc (NEDA 1604) batteries may be used but memory holding time will be substantially reduced. Memory holding time for a fresh alkaline battery is approximately 6 hours (if radio or alarm are not operated), which should take care of short, nuisance-type AC power failures. To prese...