Évaluations - 3, GPA: 4
(
)
)
|
Facilité d'utilisation
. The unit switches off after the control panel is removed. . All the current settings are saved. . Any CD already inserted in the unit remains there. Attaching the control panel . Slide the control panel from left to right into the unit’s panel locking mechanism. . Press the left-hand edge of the control panel into the unit until it clicks into place. Note: . When attaching the control panel, make sure you do not press the display. If the unit was still switched on when you removed the control panel, the unit will automatically switch on with the last settings activated (i.e. radio, CD, CD changer, or AUX) when the panel is replaced. ENGLISH 33 SWITCHING ON/OFF Switching on/off There are various ways of switching the unit on/off. Switching on/off using the vehicle ignition. If the unit is correctly connected to the vehicle’s ignition and it was not switched off using button 3, it will switch on/off simultaneously with the ignition. You can also switch the unit on even if the ignition is off. . To do so, press button 3. Note: To protect the vehicle battery, the unit will switch off automatically after one hour if the ignition is off. Switching on/off using the removable control panel . Remove the control panel. The unit switches off. . Attach the control panel again. The unit switches on. The settings (radio, CD, CD changer or AUX) that were set before the unit was switched off will be reactivated. Switching on/off using button 3 . To switch the unit on, press button 3. . To switch the unit off, press button 3 for longer than two seconds. The unit switches off. Switching on by inserting a CD If the unit is switched off and the CD drive does not contain a CD, . Press the button 9. The flip-release panel opens. . Gently insert the CD with the printed side uppermost into the CD compartment until you feel some resistance. The CD will be drawn automatically into the drive. You must not hinder or assist the drive as it draws the CD in. . Gently close the control panel whilst exerting a little pressure until you feel it click into place. The unit switches on. CD playback begins immediately. VOLUME ADJUSTMENT Volume adjustment The volume can be adjusted in steps from 0 (off) to 66 (maximum). . To increase the volume, turn the volume control 2 to the right. . To decrease the volume, turn the volume control 2 to the left. Setting the power-on volume . Press the MENU button 8. . Keep pressing the button : until “ON VOLUME” appears in the display. . Set the power-on volume using the and buttons :. If you set the power-on volume to “0”: every time you turn the unit on, the pow- er-on volume will be the same as the volume level that was set before the unit was last switched off. Risk of serious injury! If the pow- er-on volume is set to maximum, the volume level can be very high when the unit is switched on. If the volume was set to maximum before the unit was switched off and the power-on volume is set to “0”, the volume level can be very high when the unit is switched on again.This can cause hearing damage. . When you have finished making your changes, press the MENU 8 or OK ; button. Mute - instantaneous volume reduction This feature allows you to instantaneously reduce (mute) the volume to a level preset by you. . Briefly press button 3. “MUTE” appears in the display. Setting the mute level You can set the unit’s mute level. . Press the MENU button 8. . Keep pressing the button : until “MUTE LEVEL” appears in the display. . Set the mute level using the and buttons :. . When you have finished making your changes, press the MENU 8 or OK ; button. Telephone audio / navigation audio If your car radio is connected to a mobile telephone or a navigation system, the unit’s volume will be muted as soon as you “pick up” the telephone or as soon as a navigation announcement is made.The caller or voice output will then be heard over the car radio loudspeakers. In order for this to work, the mobile telephone or navigation system must be connected to the car radio in the manner described in the installation instructions. Your Blaupunkt dealer will be able to tell you which navigation systems can be used with your car radio. ENGLISH 35 VOLUME ADJUSTMENT If a traffic announcement is received during a telephone call or whilst a navigation announcement is being made, the traffic announcement will only be played after the call or voice output is finished. If you are already listening to a traffic announcement and a telephone call arrives or the navigation system wishes to make a voice output, the traffic announcement will first be heard. Once it is finished you can then listen to the call or the voice output. You can set the volume level at which the telephone calls and navigation voice output will first be heard. . Press the MENU button 8. . Keep pressing the button : until “TEL/NAVI VOL” appears in the display. . Set the mute level using the and buttons :. . When you have finished making your changes, press the MENU 8 or OK ; button....