Évaluations - 3, GPA: 3.7 ( )

Fabricant : Blaupunkt Taille : 1.17 mb Nom Fichier : Langue d'enseignement:

To use the RDS functions (AF and REG), press the RDS button 3. The RDS functions are active when “RDS” lights up in the display with a symbol. When the RDS functions are switched on, “REG ON” or “REG OFF” appears briefly in the display. Selecting the frequency range / memory This unit can receive programmes broadcast over the FM, MW and LW frequency ranges. Note: Only FM is available on the Dresden C31 and Cleveland DJ31. There are three preset memory levels for the FM range and one for each of the MW and LW ranges (only FM1, FM2 and FMT in the case of the Dresden C31 and Cleveland DJ31 units). Five stations can be stored on each memory level. RADIO MODE . Briefly press the BAND (TS) button 2 or the FMT button 2 to switch between the memory levels and frequency ranges. Tuning into a station There are various ways of tuning into a station. Automatic seek tuning . Press the or button <. The unit tunes into the next receivable station. Tuning into stations manually You can also tune into stations manually. . Press the or button <. Note: . You can only tune into stations manually if the RDS function is deactivated. Browsing through broadcasting networks (only FM) If a radio station provides several programmes, you have the option of browsing through its so-called “broadcasting network”. . Press the or button < to move to the next station on the broadcasting network. Note: . The RDS function must be activated before you can use this feature. When using this feature, you will only be able to switch to stations that you have received once already. To do so, use the scan or Travelstore function. Setting the sensitivity of the station search mode You can configure the radio to only tune into stations with a strong reception or to also tune into those with a weak reception. . Press the MENU button =. . Keep pressing the or button < until “SENS HI” or “SENS LO” appears in the display. The display shows the currently set value for sensitivity. “SENS HI6” means that the tuner is highly sensitive.“SENS LO1” means it is set to the lowest sensitivity setting. If “SENS LO” is selected, “lo” lights up in the display. . Set the required sensitivity using the and buttons <. When you have finished making your changes, . press the MENU button =. Storing stations Storing stations manually . Select the required FM1 / FM2 / FMT memory or one of the MW / LW frequency ranges (only FM in the case of the Dresden C31 and Cleveland DJ31 units). . Tune into the required station. ENGLISH 33 RADIO MODE . Press one of the station buttons 1 5 > for longer than two seconds to store the station to that button. Storing stations automatically (Travelstore) You can automatically store the five stations with the strongest reception in the region (only for FM). The stations are stored in the FMT memory. Note: . Stations that were previously stored in this memory are deleted in the process. . Keep the BAND (TS) button 2 or FMT button 2 pressed for longer than two seconds. The station storing procedure begins. “T-STORE” appears in the display. After the process is completed, the station stored in FMT memory location 1 will be played. Listening to preset stations . Select the memory or the frequency range. . Press the preset station button 1 5 > of the station you want to listen to. Scanning receivable stations (SCAN) You can briefly play all the receivable stations.You can set the scanning time to between 5 and 30 seconds in the menu. Starting SCAN . Press the SCAN button 4. Scanning begins. “SCAN” briefly appears in the display followed by a flashing display of the current station name or frequency. Stopping SCAN and continuing listening to a station . Press the SCAN button 4. Scanning is stopped and the station that was tuned into last will remain active. Setting the scantime . Press the MENU button =. . Keep pressing the or button < until “SCANTIME” appears in the display. . Set the required scantime using the and buttons <. When you have finished making your changes, . press the MENU button = twice. Note: . The set scantime also applies to scanning in CD changer mode. Programme type (PTY) Besides transmitting the station name, some FM stations also provide information on the type of programme that they are broadcasting.Your radio can receive and display this information. For example, the programme types can be: RADIO MODE CULTURE TRAVEL JAZZ SPORT NEWS POP ROCK CLASSICS Using the PTY function, you can direct ly select stations of a particular programme type. PTY-EON If you specify the programme type and start seek tuning, the radio will switch from the current station to a station of the selected programme type. Note: . If no station is found that corresponds to the selected programme type, you will hear a beep and “NO PTY” appears briefly in the display. The station that was listened to last will then be tuned into again. . If the tuned radio station or another station on the broadcasting network broadcasts the required programme type at a later...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :