Évaluations - 3, GPA: 3.7
(
)
)
|
Facilité d'utilisation
Replace any damaged hardware. Never exceed the limitations or maximum recommended load intended for grid assembly design or suspension point(s). As an added safety measure, it is suggested that the user install a second suspension point back to the grid (or building structural supports). This redundant safety point should have as little slack as possible (less than one inch is preferable). Prior to each use, inspect the loudspeaker enclosures for any cracks, deformations, missing or damaged components, which could reduce enclosure strength. Inspect the bracket assembly on the enclosures for any cracks, deformations, missing or loose screws which could reduce the flying hardware strength. Replace any loudspeaker systems that are damaged or missing hardware. Never exceed the limitations or maximum recommended load for the Zx5 systems. ELECTRO-VOICE® Zx5 Owner’s Manual ELECTRO-VOICE® Zx5 Owner’s Manual 6 Suspending Zx5 Speaker Systems (cont’) Zx5 M8 Suspension Points Metric (M8) inserts are equipped on the top and bottom of the enclosure, around the handle, and on the back of the enclosure for a total of 10 points. The inserts can be used to attach forged eyebolts or rigging brackets. Figure 3a: Zx5 M8 Suspension Points (Top, Handle, Rear) (2) M8 Suspension Points (Decal Removal Required) Figure 3b: Zx5 M8 Suspension Points (Bottom) (2) M8 Suspension Points (Single-Stud Anchor Plate Removal Required) (2) M8 Suspension Points (Decal Removal Required) (2) M8 Suspension Points (Removal of Handle Bolts Required) (2) M8 Suspension Points (Single-Stud Anchor Plate/ Decal Removal Required) ELECTRO-VOICE® Zx5 Owner’s Manual Suspending Zx5 Speaker Systems (cont’) Suspending the Zx5 using optional Electro-Voice Single-Stud Rigging Kits The Zx5 is shipped with three single-stud anchor plates for rigging with single-stud rigging. There are two more locations on the bottom to mount single-stud anchor plates for flying the Zx5 upsidedown or horizontally. All of these locations can facilitate M8 Eyebolts if desired as well. Figure 4: Suspending the Zx5 Using Included Single-Stud Anchor Plates Kit Used (Left View) - SSK-1 Single-Stud Rigging Kit (x1) Kits Used (Right View) - SSK-1 Single-Stud Rigging Kit (x2) EBK-3 Forged M8 Eyebolt Kit (x1)* Figure 5: Suspending the Zx5 Upside-Down Using Included Single-Stud Anchor Plates and Single- Stud Rigging Kit Step 1: Remove Decals Step 2: Attach Single-Stud Anchor Plates Removed from the Top of the Enclosure (shown) or Eyebolts (not shown) 7 *EBK-3 on Bottom of Top Enclosure (not shown, see Figure 3b) ELECTRO-VOICE® Zx5 Owner’s Manual Suspending Zx5 Speaker Systems (cont’) Figure 6: Suspending the Zx5 Downward from Rear Using Optional Forged Eyebolt Kit* Kit Used - EBK-3 Forged M8 Eyebolt Kit (x1) Figure 7: Assembling Eyebolts to Handle for Horizontal Suspension Figure 8: Suspending the Zx5 Horizontally from Handle Using Optional Forged Eyebolt Kit Kit Used - EBK-3 Forged M8 Eyebolt Kit (x1) Step 1: Remove Handle Bolts Step 2: Attach Eyebolts 8 *Note - When suspending from the rear M8 suspension points, it is recommended that the (2) left M8 suspension points are used on the rear of the enclosure for best weight distribution in relation to enclosure’s center of gravity. Horizontal Suspension of the Zx5 The Zx5 is capable of being suspended horizontally from the side (handle) or downward from the rear with the use of M8 Eyebolts. ELECTRO-VOICE® Zx5 Owner’s Manual Figure 9: Arraying and Suspending the Zx5 Kit Used - MB5 Wall/Ceiling Mounting Bracket (Wall Configuration) Kit Used - MB5 Wall/Ceiling Mounting Bracket (Ceiling Configuration) Kits Used - CB5 Array Bracket Kit (x1)* SSK-1 Single-Stud Rigging Kit (x1) Kit Used - CB5 Array Bracket Kit (x2)* Kits Used - CB5 Array Bracket Kit (x2)* SSK-1 Single-Stud Rigging Kit (x2) EBK-3 Forged M8 Eyebolt Kit (x1) Kits Used - CB5 Array Bracket Kit (x4)* EBK-3 Forged M8 Eyebolt Kit (x1) *Note - CB5 Array Kits can be used for 60° or 90° Splay Angles Suspending Zx5 Speaker Systems (cont’) Arraying and Suspending the Zx5 using optional Electro-Voice Mounting or Array Brackets Figure 9 shows several applications using EV mounting and array brackets. Carefully follow the instructions in this manual & the user manual packaged with EV brackets, and always use safe rigging practices when suspending Zx5. 9 ELECTRO-VOICE® Zx5 Owner’s Manual CAUTION: When flipped to 55° the feet protrude from the enclosure. Care should be taken when moving the enclosure, since damage to the feet or enclosure might occur if the system is dropped or slid across a rough surface. It is recommended that the feet be returned to the 45° position for transport. Zx5 as a Monitor By design the Zx5 is a perfect solution for stage monitors. As different stage sizes require different monitor angles, the Zx5 offers two angles without any additional accessories. Figure 11a: Zx5 as Monitor in 45° Position Figure 11b: Zx5 as Monitor in 55° Position Zx5 Stage Monitor Positions Figure 10: Sw...
Ce manuel est également adapté pour les modèles :récepteurs radio - EV ZX5-60 (2.44 mb)