Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
Batteries contain chemical substances, so they should be disposed of properly. • Indication of weak batteries: y starts flashing. This set complies with the radio interference requirements of the European Community. 7 AE2380/00.1n eng 28.10.1999 13:23 Uhr Seite 8 GENERAL INFORMATION English• FM: Extend the telescopic antenna fully and turn it for optimum reception. If the signal received is too strong (e.g. near a transmitter) retract the antenna. • MW/LW: Direct the internal MW/LW antenna by turning the set. The FM antenna is not needed. Connecting headphones Antennas • You can connect headphones to the p headphone socket. y The loudspeakers will then be switched off. Maintenance Do not expose the set or the batteries to humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight). You can clean the set with a soft, slightly dampened lint-free cloth. Do not use any cleaning agents as they may have a corrosive effect. 8 CLOCK/RADIO 1 Press TIME SET. y The clock digits 0.00 flash. 2 Press TIME ADJUST 3 or 4 to set the current time. 3 Press TIME SET again or do not press any key for at least 5 seconds. TUNINGTIME ADJUST TIME SET ALAR 5 Clock setting English AE2380/00.1n eng 28.10.1999 13:23 Uhr Seite 9 TUNINGTIME ADJUST TIME SET ALAR 5 Clock setting English AE2380/00.1n eng 28.10.1999 13:23 Uhr Seite 9 y The current time is displayed. Tuning to radio stations 1 Press POWER ON·OFF to switch on the radio. 2 Press BAND repeatedly to select the desired waveband. y FM, MW or LW is shown. 3 Keep TUNING 3 or 4 pressed for longer than 1 second. y The radio tunes to a station with sufficient strength, the current frequency is displayed and a beep tone is heard. 4 Repeat searching (step 3) until you find the desired station. • To tune to a weak station briefly press TUNING 3 or 4 as often as necessary for optimum reception. • Press POWER ON·OFF to switch the radio off. y The current time is displayed (if the clock is set). FM•MW•LW5+ R ESET TUNINGTIME ADJUST T 4 5 DI SPLA Y BAND L O C K VOLUME ON•OFF POWER SLEEP Volume and sound adjustment • Adjust the volume by using VOLUME. • Push the NEWS··MUSIC slider to select the desired sound. L O C K VO L UM E POWER F 5 PRES 1 2 3 S L E E P 9 AE2380/00.1n eng 28.10.1999 13:23 Uhr Seite 10 FEATURES EnglishYou can store up to 30 radio stations (10 stations per waveband). 1 Tune to a desired radio station. 2 Keep one of the PRESET (1– 5) keys pressed for more than 2 seconds until a double beep is heard. y The waveband, the frequency and the preset number of the stored station are displayed. • To store more than 5 stations per waveband press 5+ before assigning a station to a PRESET (1– 5) key (see step 2). • To clear all presets press RESET. Tuning to a preset radio station BANDBANDFM •MW •LW5+ PRESET 1 2 3 4 5 DI S Storing radio stations 1 To tune to presets 6 –10 first press 5+. 2 Press a PRESET (1– 5) key for less than 2 seconds. y A single beep is heard and playback starts. The waveband, the frequency and the preset number of the stored station are displayed. You can lock the buttons of the set. When a key is pressed, no action will be executed then. 1 Press LOCK. y is shown. 2 To deactivate the lock function press LOCK again. L O C K V O L U M E O N•O F F S L E E P Lock function Notes: – If the lock function is activated, the clock display will switch to the radio display automatically. To return to the clock display, deactivate the lock function and press DISPLAY FREQUENCY·TIME·ALARM, if necessary, repeatedly. – To switch the alarm off when the lock function is activated, press LOCK. 10 AE2380/00.1n eng 28.10.1999 13:23 Uhr Seite 11 English FEATURES The set can be used as an alarm clock, whereby the buzzer or radio is switched on at a set time. 1 Press ALARM SET. y and the alarm clock digits flash. 2 Press TIME ADJUST 3 or 4 to set the desired alarm time. 3 Press ALARM SET again or do not press any key for 5 seconds. Alarm clock activation and deactivation E SET ALARM SET Alarm time setting • Push the slider to ·BUZZ or ·RADIO to select the desired alarm sound and to activate the alarm clock. y and either or are displayed with the current time. • Push the slider to ·OFF to deactivate the alarm clock. Notes: – If no key is pressed, the alarm clock will be switched off after 1 hour. – You can switch the alarm off for 24 hours by pressing any key on the set. – The beep tone of the buzzer will become louder after 10 seconds. Sleep timer The sleep timer is a set period of time before the set switches off. 1 Press SLEEP repeatedly within 5 seconds until the desired sleeper time is displayed. y SLEEP and either 120, 60, 30,10 or OFF are shown. 2 As soon as the desired time is displayed, do not press any key again. y SLEEP and the frequency and waveband of the current radio station are displayed. After the chosen time has elapsed, SLEEP goes off and the radio switches off. L O C K 1 SLEEP • To deactivate the sleep timer before the chosen time has elapsed p...