Évaluations - 3, GPA: 4.3
(
)
)
|
Facilité d'utilisation
Refer servicing to qualified personnel only. Warning Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the appliance. Notice for customers in the United Kingdom A moulded plug complying with BS 1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, same rating fuse approved by ASTA or BSI to BS 1362, (i.e. marked with or mark) must be used. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. About this manual The instructions in this manual are for the CFDE95 and CFD-E95L. Before you start reading, check your model number. The CFD-E95L is the model used for illustration purpose. Note The name of the switch to turn on/off this player is indicated as below: “OPERATE”: CFD-E95L “POWER”: CFD-E95 2GB Table of contents Basic Operations Playing a CD .................................................. 4 Listening to the radio ...................................... 6 Playing a tape ................................................. 8 Recording on a tape ...................................... 10 The CD Player Using the display .......................................... 12 Locating a specific point in a track............... 12 Playing tracks repeatedly (Repeat Play) ............................................ 13 Playing tracks in random order (Shuffle Play) ........................................... 14 Creating your own programme (Programme Play) ..................................... 14 Basic Operations The Radio Presetting radio stations ................................ 16 Playing preset radio stations ......................... 17 The Audio Emphasis Selecting the audio emphasis (MEGA BASS) ......................................... 18 The Timer Setting the clock ........................................... 19 Waking up to music ...................................... 20 Falling asleep to music ................................. 21 Setting Up Choosing the power sources ......................... 23 Connecting optional components (CFD-E95L only) ..................................... 25 Changing the backlight colour in the display ............................................ 26 Additional Information Precautions ................................................... 27 Troubleshooting ............................................ 29 Maintenance ................................................. 31 Specifications ............................................... 32 Index ............................................................. 33 About the demonstration mode If “HELLO” appears on the display and then the backlight color of the display changes in sequence, the player is in the demonstration mode. To exit from the demonstration mode, set the clock or press DISPLAY for about 2 seconds. 3GB Basic Operations Playing a CD 3 1, 2 Connect the supplied mains lead (see page 23). 1 Press ZPUSH OPEN/CLOSE down to open the CD compartment and place the CD on the CD compartment. With the label side up 2 Close the lid of the CD compartment. 3 Press u. Display The player turns on (direct power-on) and plays all the tracks once. Track number Playing time 4GB Use these buttons for additional operations u x ZPUSH OPEN/CLOSE VOLUME +, – Jog dial OPERATE (or POWER) Basic Operations To Do this adjust the volume Press VOLUME +*, – (VOL +, – on the remote). stop playback Press x. pause playback Press u*. Press the button again to resume play after pause. go to the next track Turn the jog dial clockwise. (On the remote, press >.) go back to the previous track Turn the jog dial counterclockwise. (On the remote, press ..) remove the CD Press ZPUSH OPEN/CLOSE. turn on/off the player Press OPERATE (or POWER, see page 2). * The button has a tactile dot. 5GB Listening to the radio 12 Connect the supplied mains lead (see page 23). 1 Press RADIO•BAND•AUTO Display PRESET until the band you want appears in the display (direct power- on). Each time you press the button, the band changes as follows: CFD-E95: “FM” t “AM” CFD-E95L: “FM” t “MW” t “LW” 2 Hold down TUNE + or TUNE – until Indicates an FM stereo the frequency digits begin to change broadcast in the display. The player automatically scans the radio frequencies and stops when it finds a clear station. If you can't tune in a station, press the button repeatedly to change the frequency step by step. 6GB Tips • If the FM broadcast is noisy, press MODE until “Mono” appears in the display and the radio will play in monaural. • If you need to change the AM/MW tuning interval, see page 24. Use these buttons for additional operations OPERATE (or POWER) MODE VOLUME +, – To Press adjust the volume VOLUME +*, – (VOL +...
Ce manuel est également adapté pour les modèles :récepteurs radio - CFD-E95 (798.47 kb)