Évaluations - 4, GPA: 4.3
(
)
)
|
Facilité d'utilisation
Serious personal injury can occur if someone picks up and uses the nailer without knowing the correct way to operate the nailer. Do not drop or throw the tool. Dropping or throwing the tool can result in damage that will make the tool unusable or unsafe. If the tool has been dropped or thrown, examine the tool closely for bent, cracked or broken parts and air leaks. STOP and repair before using or serious injury could occur. Caution indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury. Do not modify or alter the nailer or any nailer parts. Do not use the nailer if any shields or guards are removed or altered. Do not use the nailer as a hammer. Personal injury or tool dam.occur. Avoid long extended periods of work with the nailer. Stop using the nailer if you feel pain in hands or arms. ! CAUTION Always check that the Work Contact Element (WCE) is operating properly. A nail could accidentally be driven if the WCE is not working properly. Personal injury may occur (See "Checking the Work Contact Element" Section). Disconnect air supply and release tension from the pusher before attempting to clear jams because fasteners can be ejected from the front of the nailer. Personal injury may occur. Notice indicates important information, that if not followed, may cause damage to equipment. Avoid using the nailer when the magazine is empty. Accelerated wear on the nailer may occur. Clean and check all air supply hoses and fittings before connecting the nailer to an air supply. Replace any damaged or worn hoses or fittings. Tool performance or durability may be reduced. Air compressors providing air to the nailer should follow the requirements established by the American National Standards Institute Standard B19.3-1991; Safety Standard for Compressors for Process Industries. Contact your air compressor manufacturer for information. NOTICE Operating Instructions ! WARNING NS219000 NS289100 NS289500 NS349000 • REQUIRES (SCFM with 16 nails 4.1 4.1 4.1 4.1 per minute @ 90 psi) • AIR INLET 1/4” NPT 1/4” NPT 1/4” NPT 1/4” NPT • NAIL LENGTH RANGE 2” to 31.2” 2” to 31.2” 2” to 31.2” 2” to 31.2” • NAIL SHANK 0.113” to 0.113” to 0.113” to 0.113” to RANGE 0.131” 0.131” 0.131” 0.131” • MAGAZINE CAPACITY 60-75 75-105 75-105 75-105 • WEIGHT 8 lbs. 5 oz. 8 lbs. 15 oz. 7 lbs. 5 oz 8 lbs. 11 oz. • LENGTH 19.5” 21.75” 21.75” 19.75” • HEIGHT 15” 15” 15” 15” • MAX PRESSURE 120 psi 120 psi 120 psi 120 psi • PRESSURE RANGE 70 - 120 psi 70 - 120 psi 70 - 120 psi 70 - 120 psi Nailer Components And Specifications 7-Sp Modelos NS219000, NS289100, NS289500 y NS349000 Adjustable Direction Exhaust Deflector Threaded Hole/Tool Balancer (M8 x 1.25) Nail Loading Area Magazine Single Cycle Trigger Warning Labels Nail Discharge Area Work Contact Element Notas 3 Operating The Nailer Read this manual and understand all safety warnings and instructions before operating the nailer. LUBRICATION This nailer requires lubri...
Ce manuel est également adapté pour les modèles :récepteurs radio - NS289100 (1.19 mb)
récepteurs radio - NS289500 (1.19 mb)
récepteurs radio - NS349000 (1.19 mb)