|
Facilité d'utilisation
Model iA63 Stereo Alarm Clock Radio with Motorized Rotating Dock For Your iPhone or iPod Questions? For latest instructions, visit works with Note: iHome+Sleep and iHome+Radio apps are not covered in detail in this booklet. To learn more about how these apps can enhance your experience, please download the free iHome+Sleep app from the App Store and review the Start Guide. - Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat. • Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture. • Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as Benzine, thinner or similar materials can damage the surface of the unit. This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European Directive 2002/96/EC in order to be recycled or dismantled to minimize its impact on the environment. For further information, please contact your local or regional authorities. Electronic products not included in the selective sorting process are potentially dangerous for the environment and human health due to the presence of hazardous substances. 1 2 Controls and Indicators iA63 Display AC Adaptor Jack DST switch Time set/Sync Button Aux-in Jack FM Antenna Snooze/Dimmer Button Rotate Button Stabilizer Stabilizer Lever Raise Volume Button Lower Volume Button Bedtime Button iPod Play/Pause Button iPod Dock Set - Button Set + Button Wakeup Button Presets Button Radio Button Alarm Button Rear Panel Front Panel Power/Alarm Reset/ App Settings Button iHome App Indicator Alarm Indicator Sleep Indicator Battery Low Indicator Time Display PM Indicator FM Radio Indicator NOTE: PM indicator will not appear when clock is set to 24 hour display mode 1. Move the stabilizer lever to the right to release the stabilizer bar. 2. Gently dock your iPhone or iPod into the connector dock. 3. Press the stabilizer bar until it is snug against the iPhone or iPod. The iPhone or iPod will charge while docked. Press the Button on the iA63 to play your iPhone or iPod. Quick Start 3 2: docking your iPhone/iPod 3: rotating the dock Step 1 Attach AC adaptor cable to DC jack on back of the iA63 and plug the other end into a wall socket. 1: power Press the Button to rotate your iPhone or iPod to landscape mode. Press again to return to portrait mode. NOTE: please do not attempt to rotate the dock by hand, or to rotate the dock clockwise. The dock only rotates in the counter-clockwise direction when changing from portrait to landscape mode. Step 3 RESET RESET TEST TEST 4: time sync 5: FM radio Press the Button to select FM radio. Press the + or - Button to tune in a station. See page 8 for programming presets. Updating your iA63 firmware For best performance, make sure the iA63 firmware is up to date. To update, download the free iHome+Sleep app from the App Store to your iPhone or iPod touch. Turn on the iA63, dock your iPhone or iPod touch, launch the app and go to Settings/iA63 and follow the directions on your iPhone/iPod display to update the iA63 firmware if the display indicates that an update is available. Connect iA63 to Power Source Plug the AC adaptor cable into the AC Adaptor Jack on the back of the unit and the other end into a standard 220V AC wall socket. Adaptor must be plugged in to operate unit and charge iPhone/iPod. The iA63 does not operate on batteries (a battery back up system maintains clock settings during power failures). Installing/Replacing Clock Backup Battery The iA63 uses a CR2032 battery for backup to provide continuous alarm operation and clock settings in the event of a power failure. The battery is pre-installed with a battery pull tab. Remove the pull tab when you first start to use the iA63. If the Backup Battery has been installed and a power failure occurs or the AC cord is accidentally disconnected, the display backlight will not remain lit, but current time and alarm time settings will be temporarily maintained. Otherwise, you must reset the time and alarm settings. Note: The Battery Low Icon is located at the left side of clock display. When the backup battery is low and needs to be replaced, the icon will flash. REPLACING THE BATTERY 1. Please make sure the AC adaptor is connected. Otherwise all settings may be lost during battery replacement. 2. Place unit face down on a stable surface. Pull down and remove the backup battery compartment door located on the rear of the unit. 3. Insert a new CR2032 battery by easing it under the tabs in the battery well and pressing down. Make sure the side marked + is facing up. 4. Replace the battery compartment cover and stand unit back upright. Note: Make sure you dispose of battery properly (see your local regulations). WARNING: Lithium batterie...
Ce manuel est également adapté pour les modèles :récepteurs radio - IA63 (546.17 kb)