This will auto scan to a channel. When pressing many times and no effect, you should press the raset button once and then the scan button again, till you reach your favourite station. UKW MINI RADIO Bedienungsanleitung 1 .Plazieren Sie zwei UM-4 Batterien in das Batteriefach. Achten Sie dabei auf die richtige Position. 2.Stecken Sie die 3.5mm Stereo-Ohrhörer in die Ohrhörer-Ansehlussbuchsen. 3.Bedienen Sie den power/volane-Schalter und regulieren Sie die Lautstärke. 4.0riicken Sie den rase

This often improves the reception. • If the band switch is set to the FM ST position and a stereo broadcast is received, the FM ST indicator on top of the player will light up. STEREO HEADPHONE JACK The player is equipped with a stereo headphone jack on the rear, so that you can listen to the music without disturbing others. Plug in the headphones (not included) and adjust the volume control to a pleasant level. NOTE: With the connection of external headphones the speakers of the player are turn

• In case of a power outage the unit turns off completely. After recovery of the power supply the unit displays the time as 12:00 and needs to be set again. • Insert a 9V battery (not supplied) into the battery compartment for backing up clock memory and alarm settings in case of power outages. This way the clock settings are backed up. • During battery operation the time is not displayed and radio or CD alarm modes are also deactivated. All functions including display are restored as soon as th

Approx. 9 minutes later buzzer or radio will sound again. The snooze function is repeated up to five times or until you cancel it by pressing the ALARM button or setting the function selector to OFF position. After 1 hour the snooze function is automatically reset. Sleep to Radio Select the desired radio station and volume level. Press the SLEEP button and the clock display will show 59 minutes (0:59) as the default sleep period. The sleep period can be reduced as desired by simultaneously press

(Diagram 1) 3. Press volume up control button »*] +(3) (position 3) and volume down control button [««I (4) (position 2) to set day. 4. Press alarm 1 set button (10) (position 1) hour blinking. Press volume up control button +(3) (position 3) and volume down control button U« (4) (position 2) to set hour. 5. Press alarm 1 set button (10) (position 1) minute blinking. Press volume up control button »>< + (3) (position 3) and volume down control button >

• Hold the buttons (8) and (7) pressed for quick adjustment. • Press AL Set (2) after each respective setting to store and to enter the next setting. • The unit will turn back to normal mode and save all adjusted settings if you do not carry out any setting for a few seconds. Display showing Alarm 1 hour settings (blinking hour display) Display showing hour settings minute settings (blinking minutes display) Display showing Alarm 1 weekday settings - Monday till Friday (MON TUE WED THU FRI) Disp

Notes: a. Dirty or scratched CD may cause a skipping problem. Clean or replace the CD. b. If an error display or malfunction occurs, disconncet the AC cord and remove all the batteries. Then turn the power back on. 11. The triangular symbol with the lightning Bolt warns the user to the presence of dangerous nonisolated voltage on the inside of this device which may cause an electric sh WARNING DANGER OF A HAZARDOUS ELECTRIC SHOCK. DO NOT OPEN WARNING: TO REDUCE THE RISK OF AN ELECTRIC SHOCK, DO

CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING: SHOCK HAZARD-DO NOT OPEN! Exclamation point within an equilateral triangle, is used to indicate that a specific component shall be replaced only by the component specified in that documentation for safety reason. 02-4259-GB.qxd 10/19/06 3:10 PM Page 7 ATTENTION This unit fulfils the highest technical standards. In case of any disorder remove the AC power c

8.Tuning Control 9. Clock Display 10. Battery Compartment 11. External Wire Antenna 12. Speaker 13. Stand Feet 5 7 9 14 2 4 12 1 13 3 8 6 11 10 01-4250N-GE,GB 7/21/06 12:08 PM Page 7 POWER SOURCES Insert 1 pc of 9V type (006P size) battery into the battery compartment (10) for clock back-up purpose. Before plugging in the AC power cord, please check the rating plate of your unit. It MUST MATCH with your household main supply. Then plug the AC power plug into the mains power supply. NOTE: Always

6. To switch off the radio set the FUNCTION SELECTOR (MODE) to OFF. TIME SETTTING Press and hold the TIME SET button and simultaneously press SLOW SET or FAST SET to skip to the correct time. Notes: Press SLOW SET button each time to skip one minute, press and hold the button to skip continuously. Press and hold FAST SET button to skip fast and continuously. ALARM SETTING Note: You can set two different alarm times on this unit. 1. Press and hold either the AL 1 or AL 2 button, then press the SL