Log:
Évaluations - 4, GPA: 3.8 ( )

Instructions Binatone, Modèle Fusion 2510

Fabricant : Binatone
Taille : 245.64 kb
Nom Fichier : 49e2a9b0-50f7-4c9c-a663-6cc607ea85ad.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


2 Press Ў TWICE • base Altogether, you can have up to five handsets registered to the base unit, as speak to the user. If the other handset does not answer, you can get back to To check whether a handset is registered, make sure mains power to the base 3 Press OK • volume numbers 2, 3, 4 and 5. the outside call by pressing INTERCOM again. unit is switched on and the handset is within range. The handset’s display 4 Press Ў SEVEN times • del hs With more than one handset registered to your base unit, you can To transfer the outside call to the other handset: should show its number, and the ‘signal level’ symbol on the display should show three bars. If the display shows not sub , you need to re-register the 5 Press OK • pin ¦ make intercom calls from one handset to another 2 Press PHONE to hang up and transfer the call handset. ¦ make a new intercom call while you are on an outside call 6 Key in your PIN (default 0000) and press OK ¦ shuttle between an outside call and an intercom call To shuttle between two calls 7 Press ^ repeatedly to go to the number of the handset To register a new handset or to re-register a handset ¦ transfer an outside call from one handset to another When you have both an outside call and an intercom call connected, you can you want to de-register ¦ set up a three-way conference call between yourself, an outside call and an shuttle from one to the other, like this: 1 Press HANDSET LOCATOR on the base unit for about 3 seconds 8 Press OK • confirm intercom call . Press INTERCOM to speak to each call in turn, putting the • You hear two short beeps and the IN USE light flashes. You now have 9 Press OK to confirm de-registration Each handset has its own number — 1, 2, 3, 4 or 5 — which is shown on the other on hold 3 minutes in which to register the handset. right-hand side of the display. Note — you cannot de-register the handset you are currently using. You can transfer the outside call to the other handset by pressing PHONE 2 Press MENU on the handset • register Note: the main base unit does not have intercom facility. while you’re connected on the intercom call If you press PHONE while you’re connected to the outside call, you will (If the display does not show register at this point, press Ў until it does.) Registering to a different brand of base unit Please note — disconnect it. 3 Press OK • BS 1 2 3 4 (These are base unit numbers.) Your Fusion 2510 handsets can be registered to any GAP-compatible base unit; ¦ Among the handsets registered to a single base unit, only one outside call If the other handset user presses PHONE on their handset to hang up, you’ll or you can register other GAP-compatible handsets to your Fusion 2510 base and two intercom calls can take place at once. be left connected to the outside call. 4 Key in 1 (base unit number 1) • pin unit. But we do not guarantee that all features or display messages will be ¦ If you try to make an outside call while another handset is already on the line, (Or, if the handset is already registered to a different base unit, key in a base available using other manufacturers’ equipment. Conference calls you will hear Busy tone. unit number that is not flashing.) To set up a three-way conference between yourself, an outside call and an 1 Follow the instructions in the base unit’s User Guide to put the base unit into ¦ If you try to make an intercom call when one is already in progress, you will hear Busy tone. intercom call with another handset: 5 Key in your PIN (default 0000) and press OK search registration mode (for example, step 1 of the registration procedure listed • After a few moments, when the handset finds the base unit, a number* here). the displays of all other handsets. ¦ When one handset is using the outside line, the EXT symbol will appear on 1 Either make or answer an outside call appears on the display. 2 Follow the instructions in the handset’s User Guide to register the handset 2 Press INTERCOM then key in the number of the other handset (for ex...

Ce manuel est également adapté pour les modèles :
Téléphones sans fil - Fusion 2510 (245.64 kb)
Téléphones sans fil - Fusion 2510 (245.64 kb)
Téléphones sans fil - Fusion 2510 (245.64 kb)
Téléphones sans fil - Fusion 2510 (245.64 kb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories