Évaluations - 2, GPA: 3 ( )

Fabricant : Avaya Taille : 168.01 kb Nom Fichier : 810f63fc-091b-467d-aaf0-f4323e0b160e.pdf Langue d'enseignement:

. Disconnect the Celestia 400 from the telephone line and plug a telephone into the socket. Try making a call. If this works, the line is OK. . If you are using a two-way socket adapter, remove it and plug a telephone directly into the socket. If the call now works, the adapter may be faulty. . If you think the fault may be on the exchange line, contact the service provider (the BT engineers on 151, or your cable company). . If you still cannot identify the cause of the problem, contact the Binatone Help Line. Default settings Time and date 12:00 am on 01-01 Max. incoming message length 3 minutes Security code 123 Ring count 2 If the unit is disconnected from the telephone line, all settings will be returned to these defaults. Binatone Telecom plc operates a policy of continuous product improvement, and so reserves the right to make changes to the product and functions without notice. If you need help, call the Binatone Help Line 020 8344 8870 9.00 am to 5.00 pm, Monday to Friday Model 3401 page 2 GETTING Installation The Celestia 400 should be installed where mains power cable will reach a 230V AC, switched socket. NEVER try to lengthen the mains power cable. You can either wall mount the unit, using the template supplied, or stand it on a flat surface. If you leave the unit free-standing, you can fit the support stand as shown, for the best position, or in the front slot. You need to have a telephone your Celestia 400. If you telephone line socket, use available from retailers. Alternatively, you can connect the phone and Celestia 400 to different extension SAFETY WARNING Do not install the Celestia 400 where it might get wet SLIDE INTO PLACE (If you prefer to have the unit standing upright, slide the support stand into the lower slot, rather than as shown.) MAINS TELEPHONE LINE 1 Plug the mains power lead and the telephone line cord into the back of the unit as shown 2 Plug the telephone line cable directly into the socket or into the two-way adapter (see note above) 3 Plug the mains adapter into a 230 V AC, 50 Hz mains socket, with the switch on the socket set to OFF 4 Switch on power at the mains socket Conditions for use You can connect the Celestia 400 to a public exchange line in the UK. It is not suitable for connection to a PBX. The ringer equivalence numbers (RENs) of all instruments Do not clean any part of your Celestia connected to an exchange line must not add up to more than 4. 400 with solvent chemicals, abrasives or The Celestia 400 has a REN of 1; most other phones and fax spray cleaners which might get inside the machines have a REN of 1 unless marked otherwise. case and cause damage not covered by the guarantee. When necessary, clean it with a damp cloth. NOTE: if you disconnect the Celestia 400 from mains Keep your Celestia 400 away from hot, power, your time and date settings will be lost. However, humid conditions or strong sunlight. stored messages and Caller ID records will be retained. The Celestia 400 must be used with...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :