Instructions Conair, Modèle FUSION 2925

Fabricant : Conair
Taille : 1.83 mb
Nom Fichier : fusion_2925_user_guide.pdf

Langue d'enseignement:

Aller à la télécharger

Facilité d'utilisation

It will stay in registration mode for about one minute, so the following handset sequence must be completed within this time. 2. Press

and to seled Registration. 3. Press and then enter the 4-digit system PIN. (Default 0000) 5. Press to confirm and the handset shows" Waiting" If the handset registration is successful, you will hear a confirmation tone and the display will return to idle screen, with the steady on. The handset will automatically be allocated the next available handset number, which is shown in the handset display in standby mode. If the handset registration is unsuccessful, the display will time out and return to the base selection list. 9.5.7.3 Access Your Answering Machine Remotely When you are away from home, you can check your messages or switch the answering machine on or off, by using a tone-dialling phone to call the answering machine, and entering a 4-digit remote access PIN. The 4-digit remote access PIN code is used to prevent other people from unauthorised access of your answering machine. 1. Place a call from a tone-dialling phone to your Fusion 2925. 2. When the answering machine answers the call and starts playing the OGM, press . 3. Enter the 4-digit Remote Access PIN. (Default PIN is 0000) Note: The <*> must be entered while the OGM is still playing, and the 4-digit PIN should follow without any delays. Note: If the 4-digit Remote Access PIN is entered incorredly three times consecutively, the line will be released automatically. 4. Press the following keys to carry out your desired lundion. Keys Functions While message is not playing While message is playing 2 Delete the current messaqe playback 4 Repeat playing the current message from the beginning. Press twice to skip backward to play the previous messaqe. 5 Play the message Stop the current message playback 6 Skip to play the next message 7 Turn on the answering machine 8 Stop the current message playback 9 Turn off the answering machine Note: If your answering machine is switched off, the phone will answer after 14 rings and play the Answer Only OGM. You can then enter* followed by the 4-digit remote access PIN (Default Remote Access PIN is 0000) to activate the remote access feature. When your answering machine memory is full and the answer mode is in Answer & Record, the answer mode will change to Answer Only automatically. It will change back to Answer & Record mode automatically after some messages have been deleted. 9.5.8 Call Screening When the answering machine is on and takes a call, you can listen to the caller leaving a message. You can then identify the caller and decide whether to take the call in person. If the answering machine is set to ON, when there is an incoming message, the handset will display “Screen?” 1. Press to start call screening. Any handset can listen to who is leaving the message and decide whether to pick up the call or not. 2. The handset will display “Screening”. 3. You can adjust the speaker volume by pressing . OR 3. Press to return to showing "Screen?" and stop listening to the recording. At any time if you want to pick up the call, you can press or and the message recording will be stopped automatically, with any recording up to that point saved as a new message. 10 TROUBLESHOOTING If you have difficulty with your phone, please try the suggestions listed below. Problem Cause Solutions No dialling tone when pressing key a. The connection cord of the base station is not plugged in. b. The adapter cord is not plugged in correctly in the base station. c. Another handset is using the base to make a call. d. Wrong telephone line cord a. Check the connections. Unplug and plug back in the mains. Check that the telephone line cord has been plugged into the base station and the phone socket. b. Check the base station plug and the 230V plug (remove and plugin). c. Wait until the line is unoccupied. d. Use the original telephone line cord supplied. When connect to a PBX, no and/or wrong connection after diallinq. Dialling prefix is needed. Insert the dialling prefix "Searching" is displayed. Base station out of range. Base station not connected to mains. Reduce the range. Connect base station to mains. The call does not work. Service not activated or wrong setting Check your Subscription with network or change the dial mode. No display. Empty battery Recharge battery Answering Machine The unit does not record new messages. The answering machine is turned off. Turn on the answering machine. The caller cannot leave a message. a. The answering machine is turned off. b. Message memory is full. c. ANSWER ONLY mode is set. a. Turn on the answering machine. b. Erase unnecessary message...

Ce manuel est également adapté pour les modèles :
Téléphones sans fil - FUSION 2925 (1.83 mb)
Téléphones sans fil - FUSION 2925 (1.83 mb)
Téléphones sans fil - FUSION 2925 (1.83 mb)
Téléphones sans fil - FUSION 2925 (1.83 mb)

Voir tous

Téléchargez votre