Log:
Évaluations - 4, GPA: 3.8 ( )

Instructions Panasonic, Modèle KXTG2214P

Fabricant : Panasonic
Taille : 1.6 mb
Nom Fichier : KXTG2214F.PDF
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


After 4 additional minutes on hold, the call will be disconnected. • The alarm volume corresponds to the ringer volume level (p. 15). If the ringer is OFF, the alarm will sound at the LOW level. Making Calls To adjust the receiver/speaker volume while talking 3 levels (HIGH, MEDIUM and LOW) are available for the receiver and 6 levels for the speaker. To increase volume, press []. > Ex. Receiver volume: HIGH To decrease volume, press []. • The display shows the current volume setting. > Speaker volume: level 6 Volume • If you try to increase/decrease volume when it is at Low High CH Hold the maximum/minimum level, the handset will beep 3 times. Backlit LCD display The lighted display of the handset will stay on for a few seconds after pressing a button or lifting the handset off the base unit. Lighted handset keypad The handset dialing buttons will light when you press a button or lift the handset off the base unit. The light will go out after a few seconds. Answering Calls When a call is received, the unit rings and “Incoming call” is displayed, and the Ringer indicator on the handset and the IN USE/CHARGE indicator on the base unit flash rapidly. If you subscribe to a Caller ID service, see page 20. ]. Ringer Indicator 1 Press [] or [ • You can also answer a call by pressing > > any button except [], [] and [OFF]. 2 To hang up, press [OFF] or place the handset on the base unit. Auto Talk: [] If you set the Auto Talk feature to ON (p. 14), [OFF] you can answer a call by lifting the handset off the base unit. [ ] Basic • When the ringer volume is set to OFF, the unit will not ring (p. 15). 19For assistance, please call: 1-800-211-PANA(7262) Caller ID Service This unit is compatible with Caller ID services offered by your telephone company. If you subscribe to Caller ID, the caller’s name and phone number will be displayed and recorded in the Caller List. How caller information is displayed when a call is received When a call comes in, the unit will ring and caller ID Example information will be received. Once caller ID information is received, the handset display shows the caller’s ROBINSON,TINA 1-555-222-3333 information. • After you answer the call, the display will show the length of the call. • If the unit does not receive caller ID information, one of the following will be displayed: Display Out of area Meaning The caller dialed from an area which does not provide Caller ID service. Private caller The caller requested not to send his/her information. Long distance The caller made a long distance call. • If your unit is connected to a PBX which does not support Caller ID, you cannot access Caller ID service. • The name display service may not be available in some areas. For further information, please contact your telephone company. • If you subscribe to both Caller ID and Call Waiting, when talking on the phone as another call comes in, the second caller’s name and phone number will be displayed (p. 34). Using the Caller List The unit can record information up to 30 different callers and store this information in the Caller List. Caller information is sorted by the most recent call to the oldest. When the 31st call is received, the information from the 1st call is deleted. The unit will also tell you how many calls you missed while you were out or unavailable to answer the phone. 1 The display will show the number of calls you missed. Handset off the base unit 2 missed calls Rcvd Phone calls book 1 2 • After viewing the missed call entries, “missed calls” will disappear from the display. • When your voice mail box has received message(s); Handset on the base unit—When the handset is off the base unit, 2 missed calls1 “Voice Mail” will be displayed in place of missed calls display. —When the handset is on the base unit, “Voice Mail” will be also displayed on the first line. Press Rcvd calls to review other calls logged in the Caller List. • If there are no items in the Caller List, “Rcvd calls” will not be displayed. 2 Using the Caller List Viewing the Caller List 1 Press Rcvd calls to enter the Caller List. • You can also enter by pressing [] or []. 2 To search from the most recent call, press []. To search from the oldest call, press []. >> 2 missed calls Rcvd Phone calls book 2 missed calls =Scroll list >> > >SMITH,JACK 3:10P JUN.29 Erase Select 1-555-333-4444 3:10P JUN.29 Erase Select Example • The caller’s name, number and the time and date received are displayed. Name and phone number are alternately displayed as shown on the right. 3 To exit the list, press [OFF]. • If there is no name information of a caller, the display will only show the phone number. • If you do not press any buttons for 60 seconds, the unit will exit the Caller List. What “v” means “v” indicates you have already viewed this calling SMITH,JACKinformation, answered the call or called back the caller. 3:10P JUN.29 v If the same caller calls again, the call entry with “v” will be replaced with the new call entry. If a caller call...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories