Évaluations - 4, GPA: 4.5
(
)
)
|
Facilité d'utilisation
When new messages have been recorded, the NEW MESSAGE indicator flashes. Voice Day/Time Stamp: During playback, the unit will announce the day and time when each message was recorded (p. 13). Using the Base Unit To play back messages Base Unit Press [MESSAGE/SLOW TALK]. • The unit announces the number of new messages and only new messages are played back. • During playback, the display shows the message number. • At the end of the last message, “End of final message” is heard. The unit will announce the remaining recording time if it is less than 3 minutes. • When you have no new messages, the unit announces “No new messages. All message playback” and plays back all messages. • When you have no messages, the unit announces “No messages”. NEW MESSAGE Indicator [MESSAGE/SLOW TALK] 41For assistance, please call: 1-800-211-PANA(7262) Answering Listening to Messages Using the Handset (Remote Operation) To play back messages Handset 1 Press [MENU]. 2 Scroll to “Message play” by pressing [] or > > [], then press Select. • The unit announces the number of new messages and only new messages are played back. • The messages will be heard from the speaker. To switch to the receiver, press [ ]. To switch back to the speaker, press [ ]. • [MESSAGE/SLOW TALK], [REPEAT], [SKIP] and [STOP]* can also be used during playback (p. 43). • When you have no new messages, the unit announces “No new messages. All message playback” and plays back all messages. • When you have no messages, the unit announces “No messages”. • If you do not press any buttons, the voice menu will start (see below). Message play Exit Select>> 4:New messages5:All messagesRepeat Skip 3 To end remote operation, press [OFF] or place the handset on the base unit. *If you press [STOP] on the base unit during message playback, operation is stopped. To resume the playback, press [MESSAGE/SLOW TALK] on the base unit within 15 seconds, or the voice menu will start (see below). • If noise interferes with the message playback: — during playback using [ ], press [ ] (Channel). — during playback using [ ], press [ ] (Channel). The unit selects a clearer channel. • At the end of the last message, “End of final message” is heard. The unit will announce the remaining recording time if it is less than 3 minutes. • If the unit starts to ring during the remote operation, press [ ] or [ ] to answer the call. To playback, start again from the beginning after hanging up. • If you hear “Memory full” after playback, erase unnecessary messages (p. 44). Voice menu If you do not press any buttons at the end of the last message, the unit will announce “End of final message” and the voice menu will begin. The unit announces, “Press 4 to play back new messages. Press 5 to play back all messages.” • You can press buttons for other options (p. 43) even if the voice menu has started. • If you do not press any buttons within 10 seconds, the handset will exit remote operation. Listening to Messages During playback To adjust the speaker volume Base unit or Handset: To increase volume, press []. To decrease volume, press []. • You can also adjust the receiver volume on the handset. > > To slow down the playback speed (Slow Talk Message Playback) Base unit: Press [MESSAGE/SLOW TALK]. Handset: Press [3]. • To return to normal speed, press [MESSAGE/ SLOW TALK] on the base unit or [3] on the handset. • Each time you press the button during playback, the speed will change to slow/normal. • Playback speed will return to normal after you finish listening to messages. To repeat a message Base unit: Press [REPEAT]. Handset: Press Repeat or [1]. • If pressed within the first 5 seconds of playback, the previous message will be played. To skip message Base unit: Press [SKIP]. Handset: Press Skip or [2]. To stop playback Base unit: Press [STOP]. • To resume playback, press [MESSAGE/SLOW TALK]. • If you do not press any button for 60 seconds or if you press [STOP] again, playback mode will be canceled. Handset: Press [9]. • If you do not press any button within 15 seconds after stopping playback, the voice menu will start (p. 42). For Caller ID service users (p. 26) During playback, when the handset is on the base unit, the handset display will show the name and/or number of the caller whose message is being played. To call back the displayed number: During playback, lift the handset and press Call, [ ] or [ ] within 10 seconds. • The unit stops playback and dials the phone number. • After listening to a new incoming message, “v” will be added to its call entry in the Caller List (p. 28). Answering For assistance, please call: 1-800-211-PANA(7262) 43 Erasing Messages The unit will announce the remaining recording time after playback, if it is less than 3 minutes. New messages cannot be recorded when: —“Memory full” is heard. —“ FULL ” is displayed on the base unit. —the ANSWER ON indicator flashes rapidly (when the Answering System is on). Erase unnecessary messages. We recommend you erase unnecessary mess...