Évaluations - 4, GPA: 3.5
(
)
)
|
Facilité d'utilisation
• The call is put on hold. 2 When the paged party answers, press [CONF] on your unit to make a conference call. • To leave the conference, press [OFF] on the handset or press [SP-PHONE] on the base unit. The two other parties can continue the conversation. • During a conference, the outside call can be placed on hold by pressing [HOLD/ INTERCOM] on the handset or [HOLD] on the base unit. Internal communications between the handset and base unit are not suspended. Only the person who placed the call on hold can resume the full conference by pressing the soft key ( CONF ) on the handset or [CONF] on the base unit. Call Share This feature allows the base unit or the handset to join an existing outside call. • To prevent the base unit user from joining your conversation, turn the Call Privacy feature on (p. 50). To join a conversation (Call Share) Press [C] or [s]. Handset • “Conference” is displayed. Base Unit Press [SP-PHONE]. Telephone 49For assistance, please call: 1-800-211-PANA(7262) Special Features Muting Your Conversation During a call, you can mute your phone so the other party cannot listen to you. When muting your conversation, you can hear the other party. Handset Press the soft key ( ). MUTE • “Mute” will be displayed for a few seconds and “ MUTE ” will flash. • To release the mute, press the soft key ( MUTE ) again. • If you press [C] or [s] to switch between the receiver and speaker, the mute will be released. Base Unit Press [MUTE]. • The SP-PHONE indicator flashes. • To release the mute, press [MUTE] again. Call Privacy Handset Call Privacy allows you to prevent the base unit user from joining your conversation with an outside caller. To allow other users to join your conversation, leave this feature off. This feature is only available for the handset. To turn on the Call Privacy feature: Press the soft key ( PRIVACY ) during a conversation. • “PRIVACY” will be displayed. • To turn this feature off, press the soft key ( PRIVACY ) again during a conversation. • While the Call Privacy feature is turned on, the base unit user cannot join the conversation. • Call Privacy will turn off after you hang up the call. Using the PAUSE Button (For PBX Line/Long Distance Calls) Handset Base Unit We recommend you press the soft key ( PAUSE ) on the handset or press [REDIAL/ PAUSE] on the base unit if a pause is required for dialing with a PBX or to make a long distance call. • “ PAUSE ” is displayed on the handset only when dialing before pressing [C] or [s] (p. 28), or storing numbers in the phone book (p. 39). Ex. Line access number [9] (PBX) [9] N Soft key ( PAUSE ) or [REDIAL/PAUSE] N Phone number • Pressing the soft key ( PAUSE ) on the handset or [REDIAL/PAUSE] on the base unit once creates a 3.5 second pause. This prevents misdialing when you dial after confirming the entered number (p. 28) or dial a stored number (p. 41, 42, 44). • Pressing the soft key ( PAUSE ) on the handset or [REDIAL/PAUSE] on the base unit more than once increases the length of the pause between numbers. Special Features Temporary Tone Dialing (For Rotary or Pulse Service Users) Press [*] (TONE) before entering access numbers which require tone Handset Base Unit dialing. • The dialing mode changes to tone. You can enter numbers to access an answering service, electronic banking service, etc. When you hang up, the dialing mode will return to pulse. For Call Waiting Service Users Handset Base Unit Press [FLASH/CALL WAIT] if you hear a call waiting tone during a conversation. • The first call is put on hold and you can answer the second call. • To return to the first caller, press [FLASH/CALL WAIT] again. • Call Waiting service cannot be used when the first call is put on hold or the Answering System is handling a call. • If this function does not operate properly, consult your telephone company for details. Call Waiting Caller ID display Handset If you subscribe to both Caller ID and Call Waiting with Caller ID services (CWID), when a second call is received BROWN,NANCY 1-555-666-7777 ----Waiting---- while talking, the second caller’s information will be displayed. After you hear a call waiting tone while talking, the display shows the caller’s name with the phone number and “Waiting”. • Contact your telephone company for details about availability in your area, and to verify that CWID service is activated on your telephone line. • The caller’s information will only be shown on the display of the handset which is on the outside call. • The second caller’s name will not be announced even if the Talking Caller ID feature is on (p. 33). Telephone 51For assistance, please call: 1-800-211-PANA(7262) Special Features FLASH Button Handset Base Unit Pressing [FLASH/CALL WAIT] allows you to use special features of your host PBX such as transferring an extension call, or accessing optional telephone services such as call waiting. • Pressing [FLASH/CALL WAIT] cancels the mute or the Temporary Tone Dialing mode (p. 50, 51). Selecting the fl...