Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
11 Answering calls
Viewing the caller list and calling back
Character table
Special features
19 Troubleshooting
20 FCC and other information
NOTE:
When a call is received, the IN USE indicator on the base unit flash rapidly.
1 Press [ ] or [ ] to enter the caller list.
Key
Character
This equipment has been tested and found to comply with the limits for a
This equipment complies with Part 68 of the FCC rules and the
General use
1 Lift the handset and press [ ].
2 Press [ ] to search from the most recent call, or [ ] to search from the
[1]
Space -
*
!
16 Special features
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
requirements adopted by the ACTA. On the bottom of this equipment is a
designed to provide reasonable protection against harmful interference in a
• You can also answer the call by pressing any button except [OFF] and
oldest call.
[2]
A
B
C
(
Automatic security code setting
Problem
Cause/solution
label that contains, among other information, a product identifier in the
residential installation. This equipment generates, uses, and can radiate
[ # ] (Any key talk feature).
format US:5GG———.
3 Press [ ].
[3]
D
E
F
)
When you place the handset on the base unit for the first time after
The unit does not work.
- Make sure the battery is installed correctly and fully charged.
radio frequency energy and, if not installed and used in accordance with the
If requested, this number must be provided to the telephone company,
2 When you finish talking, press [OFF] or place the handset on the base
- Check the connections.
Note:
[4]
G
H
I
"
connecting the AC adaptor, the unit automatically selects one of more than
- Unplug the base unit’s AC adaptor to reset the unit. Reconnect
instructions, may cause harmful interference to radio communications.
unit or charger.
•
If the caller list is empty, you cannot enter the caller list by pressing [
] or
65,000 security codes.
the adaptor and try again.
•
Registration No.------------------- (found on the bottom of the unit)
However, there is no guarantee that interference will not occur in a particular
[5]
J
K
L
'
[
].
- Place the handset on the base unit and try again.
•
Ringer Equivalence No. (REN) ------------------- 0.0B
installation. If this equipment does cause harmful interference to radio or
Temporary ringer off
•
Once new calls have been checked, “NEW” is not displayed.
[6]
M
N
O
;
Handset locator
I cannot hear a dial tone.
- Confirm the telephone line cord is properly connected.
television reception, which can be determined by turning the equipment off
A plug and jack used to connect this equipment to the premises wiring and
While the handset is ringing for an outside call, you can turn the ringer off
[7]
P
Q
R
S
You can locate the handset or page the handset user with beep tones from
- Disconnect the unit from the telephone line and connect a
and on, the user is encouraged to try to correct the interference by one or
telephone network must comply with the applicable FCC Part 68 rules and
temporarily be pressing [ # ].
Editing a caller's phone number before calling back
[8]
T
U
V
?
known working telephone. If the working telephone
the base unit.
more of the following measures:
operates properly, contact our service personnel to have the
requirements adopted by the ACTA. A compliant telephone cord and modular
You can edit a phone number in the caller list by removing its area code and/
[9]
W
X
Y
Z
1 Base unit:
unit repaired. If the working telephone does not operate
–
Reorient or relocate the receiving antenna.
plug is provided with the product. It is designed to be connected to a
12 Call transfer (KX-TG2122 only)
or the long distance code “1”.
[
]
To move the cursor to the left
Press [LOCATOR].
properly, contact your telephone service provider.
–
Increase the separation between the equipment and receiver.
compatible modular jack that is also compliant.
–
Connect the equipment into an outlet on a circuit different from that to
During an outside call, you may transfer the outside call to another
1 Press [ ] or [ ] to enter the caller list.
[
]
To move the cursor to the right
• The IN USE indicator flashes. The handset beeps for 1 minute and
Programmable settings
The REN is used to determine the number of devices that may be connected
which the receiver is connected.
handset.
“PAGING” is displayed on the handset.
2 Select the desired item by using [ ] or [ ].
•
To enter another character that is located on the same dial key, first set
2
to a telephone line. Excessive RENs on a telephone line may result in the
Base unit:
–
Consult the dealer or an experienced radio/TV technician for help.
Problem
Cause/solution
1 Ex. Handset 1:
3 Press [EDIT] repeatedly until the phone number is shown in the desired
the currently selected character by pressing either [ * ], [ 0 ], or [ # ].
devices not ringing in response to an incoming call. In most but not all areas,
To stop paging, press [LOCATOR] again.
While programming, the
- A call is being received. Answer the call and start again after
Some cordless telephones operate at frequencies that may cause
Press [TRANSFER] on the originating handset.
the sum of RENs should not exceed five (5.0). To be certain of the number of
format.
Handset:
handset starts to ring.
hanging up.
interference to nearby TVs and VCRs. To minimize or prevent such
• “TRANSFERRING” shows in the display. Both handsets are paged.
devices that may be connected to a line, as determined by the total RENs,
(1) Local phone number
Editing/correcting a mistake
To stop paging, press [OFF].
interference, the base of the cordless telephone should not be placed near or
2 Ex. Handset 2:
contact the local telephone company. For products approved after July 23,
Example: 321-5555
Press [
] or [
] to move the cursor to the character or number you want to
Battery recharge
on top of a TV or VCR. If interference is experienced, move the cordless
erase, then press [CLEAR]. Enter the appropriate character or number. Each
2001, the REN for the product is part of the product identifier that has the
Press [TRANSFER] or [
] on the receiving handset to answer the
(2) Area code - Local phone number
Temporary tone dialing (for rotary/pulse service users)
telephone further away from the TV or VCR. This will often reduce, or eliminate,
time you press [CLEAR], a character under the cursor is erased.
Problem
Cause/solution
format US:AAAEQ##TXXXX. The digits represented by ## are the REN
call.
Example: 555-321-5555
interference.
•
Press and hold [CLEAR] to erase all character or numbers.
You can temporarily switch the dialing mode to tone when you need to
without a decimal point (e.g., 03 is a REN of 0.3).
• To cancel the call transfer, you may press [OFF], [TRANSFER], or
I fully charged the battery,
- Clean the charge contacts and charge again.
(3) 1 - Area code - Local phone number
access touch tone services (for example, answering services, telephone
[
] on the originating handset.
but “ ” continues to
- The battery may need to be replaced with a new one.
If this equipment causes harm to the telephone network, the telephone
Example: 1-555-321-5555
Finding and calling a handset phonebook item
banking services, etc.).
display.
company will notify you in advance that temporary discontinuance of service
4
Press [
].
Press [ * ] (TONE) before entering access numbers which require tone dialing.
may be required. But if advance notice isn’t practical, the telephone company
Note:
1 Press [FUNCTION].
Caller ID service
The handset display is
- Confirm that the battery is properly installed.
blank.
- Fully charge the battery.
will notify the customer as soon as possible. Also, you will be advised of your
•
The number edited in the step 3 is not maintained in the caller list.
2 Press [ ] or [ ] .
PAUSE button (for PBX/long distance service users)
right to file a complaint with the FCC if you believe it is necessary.
13 Caller ID service
• The first item or last item is displayed.
A pause is sometimes required when making calls using a PBX or long
Making/answering calls, intercom
Storing caller information into the handset phonebook
The telephone company may make changes in its facilities, equipment,
This unit is Caller ID compatible. To use Caller ID features, you must
3 Press [ ] to scroll from the memory station “01”, or [ ] to scroll from
distance service.
Problem
Cause/solution
operations or procedures that could affect the operation of the equipment. If
subscribe to Caller ID service of your telephone service provider.
1 Press [ ] or [ ] to enter the caller list.
memory station “10”.
For example, if you need to dial the line access number “9” when making
Static is heard, sound
- Move the handset and base unit away from other
outside calls with a PBX:
this happens the telephone company will provide advance notice in order for
2
• You can also find the items using the memory station numbers [ 0 ] to
cuts in and out.
electrical appliances.
Select the desired item by using [
] or [
].
you to make necessary modifications to maintain uninterrupted service.
Caller ID features
[ 9 ] directly.
1 Press [ 9 ], then press [PAUSE], then dial the phone number.
Interference from other
- Move closer to the base unit.
• To edit the number, press [EDIT] repeatedly until the phone number is
electrical units.
- Raise the base unit antenna.
• The memory station number [ 1 ] shows “01”, [ 0 ] shows “10” on the
When an outside call is being received, the calling party's name and
If trouble is experienced with this equipment, for repair or warranty information,
shown in the desired format.
2 Press [ ].
- Press [CH] to select a clearer channel in the talk mode.
display.
telephone number are displayed.
- If your unit is connected to a telephone line with DSL service,
please contact a Factory Servicenter or other Authorized Servicer. If the
3 Press [FUNCTION].
Note:
Caller information for the last 40 different callers is logged in the caller list by
4 Press [ ].
we recommend connecting a noise filter between the base unit
equipment is causing harm to the telephone network, the telephone
•
A 3.5 second pause is inserted each time [PAUSE] is pressed. Press
and the telephone line jack. Contact your DSL provider for details.
the most recent call to the oldest.
4 Press a memory station number [ 0 ] to [ 9 ].
company may request that you disconnect the equipment until the problem is
repeatedly to insert longer pauses.
•
Generally caller information is displayed from the 2nd ring.
• The memory station number [ 1 ] is shown as “01”, and [ 0 ] is shown as
resolved.
The handset does not
- The ringer is turned off. Turn it on.
“10” in the phonebook.
ring.
•
If the unit cannot receive caller information, the following is displayed:
Erasing selected caller information
Note:
For Call Waiting service users
Connection to party line service is subject to state tariffs. Contact the state
I cannot make a call.
- The dialing mode may be set incorrectly. Change the setting.
21 Specifications
– “OUT OF AREA”: The caller dialed from an area which does not
•
If “EMPTY” is displayed in step 2, the phonebook is empty.
public utility commission, public service commission or corporation
1
- Another handset is in use. Try again later.
Press [
] or [
] to enter the caller list.
To use Call Waiting, you must subscribe to Call Waiting service of your
provide Caller ID service.
•
If the phone number is more than 12 digits, the whole number has not
commission for information.
General
telephone service provider. This feature allows you to receive calls while you
– “PRIVATE CALLER”: The caller requested not to send caller
2 Select the desired item by using [ ] or [ ].
been shown. The remaining numbers are displayed alternately.
I cannot redial by
- If the last number dialed was more than 24 digits long, the
Operating Environment
5 ˚C - 40 ˚C (41 ˚F - 104 ˚F)
are already talking on the phone. If you receive a call while on the phone, you
pressing [REDIAL].
number will not be redialed correctly. Dial the number manually.
If your home has specially wired alarm equipment connected to the telephone
information.
3 Press [CLEAR], then press [OFF].
will hear a Call Waiting tone. Please contact your telephone service provider
line, ensure the installation of this equipment does not disable your alarm
Frequency
Handset transmit: 911.171 MHz - 913.066 MHz
– “LONG DISTANCE”: The caller called you long distance.
Editing items in the handset phonebook
for details and availability of this service in your area.
I cannot have a
- Make sure that an optional headset is connected properly.
equipment. If you have questions about what will disable alarm equipment,
Base unit transmit: 2480.0 MHz - 2482.9 MHz
– “ERROR”: The Caller ID information is interfered with during reception.
Erasing all caller information
conversation using the
1 Press [FUNCTION].
Press [FLASH] to answer the 2nd call after the tone.
headset.
consult your telephone company or a qualified installer.
Base unit
•
If the unit is connected to a PBX system, caller information may not be
1 Press [ ] or [ ] to enter the caller list.
•
To switch between calls, press [FLASH].
received properly. Consult your PBX supplier.
2 Select the desired item by using [ ] or [ ].
I cannot make long
- Make sure that you have long distance service.
This equipment is hearing aid compatible as defined by the FCC in 47 CFR
Dimensions
Approx. height 121.8 mm x width 109 mm x depth 106 mm
2 Press and hold [CLEAR] until “CLEAR ALL CID ?” is displayed.
•
The name display service may not be available in some areas. For further
• You can also find the items using the memory station numbers [ 0 ] to
distance calls.
Section 68.316.
(4 13/16 inches x 4 9/32 inches x 4 5/32 inches)
information, please contact your telephone service provider.
3 Press [CLEAR].
[ 9 ] directly.
Useful information
I cannot page the
- The called handset is too far from the base unit.
When you hold the phone to your ear, noise might be heard in your
Mass (Weight)
Approx. 203 g (0.45 lb.)
3 Press [EDIT].
handset.
- The called handset is in use. Try again later.
Hearing Aid. Some Hearing Aids are not adequately shielded from external
Power consumption
Standby: Approx. 4.0 W
Missed calls
4
17 Optional headset
Edit the name using the dial key, [
] or [
] (max. 15 characters).
RF (radio frequency) energy. If noise occurs, use an optional headset
Maximum: Approx. 5.0 W
Phonebook
If a call is not answered, the unit treats the call as a missed call.
Caller ID
5 Press [EDIT].
Plugging an optional headset into the handset allows a hands-free phone
accessory or the speakerphone option (if applicable) when using this
Base RF Power output
94 dBuV/m (max.)
For example, if 10 calls from different parties are missed, “NEW CALL 10” is
15 Handset phonebook
conversation.
Problem
Cause/solution
phone. Consult with your audiologist or Hearing Aid manufacturer about the
displayed on the handset display. This lets you know if you should view the
6 Edit the phone number using the dial key, [ ] or [ ] (max. 24 digits).
Power supply
AC adaptor (120 V AC, 60 Hz)
Connecting an optional headset to the handset
availability of Hearing Aids which provide adequate shielding to RF energy
You can add up to 10 items to the handset phonebook and search for
The handset does not
- You have not subscribed to Caller ID service. Contact your
caller list to see who called while you were out.
7 Press [EDIT].
Open the headset jack cover, and connect an optional headset to the
display the caller’s
telephone service provider to subscribe.
commonly emitted by digital devices.
Handset
phonebook items by name.
headset jack.
name and/or phone
- If your unit is connected to any additional telephone equipment
Dimensions
Approx. height 220 mm x width 50.6 mm x depth 40.2 mm
Call Waiting Caller ID display
Storing names and numbers
number.
such as a Caller ID box or cordless telephone jack, disconnect
WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING
Erasing an items in the handset phonebook
We recommend using the Panasonic headset.
the unit from the equipment and plug the unit directly into the
TEST CALLS TO EMERGENCY NUMBERS:
(8 21/32 inches x 2 inches x 1 9/16 inches)
If you subscribe to both Caller ID and Call Waiting with Caller ID services, the
1 Press [FUNCTION].
Note:
wall jack.
1) Remain on the line and briefly explain to the dispatcher the reason for
Mass (Weight)
Approx. 214 g (0.47 lb.) with battery
1 Press [FUNCTION].
2nd caller's information is displayed after you hear a Call Waiting tone. Please
•
When an optional headset is connected to the handset, make sure to
- If your unit is connected to a telephone line with DSL service,
2 Press a memory station number [ 0 ] to [ 9 ].
use the headset to talk with the caller. If you want to have a normal
we recommend connecting a noise filter between the base unit
the call.
Handset RF Power output
94 dBuV/m (max.)
contact your telephone service provider for details and availability of this
2 Select the desired item by using [ ] or [ ].
• If an item is already stored, that information is displayed.
and the telephone line jack. Contact your DSL provider for details.
2) Perform such activities in the off-peak hours, such as early morning or
service in your area.
• You can also find the items using the memory station number [ 0 ] to
cordless phone conversation, disconnect the headset.
- The name display service may not be available in some areas.
Power supply
Ni-Cd battery (3.6 V, 600 mAh)
• The memory station number [ 1 ] is shown as “01”, and [ 0 ] is shown as
late evenings.
[ 9 ] directly.
Contact your telephone service provider for details.
Charger (KX-TG2122 only)
“10” in the phonebook.
- Other telephone equipment may be interfering with this unit.
3 Press [CLEAR].
14 Caller list
18 Wall mounting (Base unit only)
This device complies with Part 15 of the FCC Rules. Operation is subject to
Disconnect the other equipment and try again.
Dimensions
Approx. height 70.4 mm x width 83.3 mm x depth 91.4 mm
3 Press [EDIT].
the following two conditions: (1) This device may not cause harmful
Connect the telephone line cord. Mount the unit by inserting the mounting
- The caller requested not to send caller information.
- If a call is being transferred to you, the caller information is not
interference, and (2) this device must accept any interference received,
(2 3/4 inches x 3 9/32 inches x 3 19/32 inches)
What the display means
4 Enter the name (max. 15 characters), using the dialing buttons [ 1 ] to
Erasing all items in the handset phonebook
pins into the round openings on the base unit (for pin (B), use round cut out
displayed.
including interference that may cause undesired operation.
Mass (Weight)
Approx. 203 g (0.45 lb.) with AC adaptor
[ 9 ], [
] or [
].
at the bottom of the base unit if you are using the 4 inches phone plate),
- Generally, caller information is displayed from the 2nd ring.
• If a name is not required, press [EDIT] and go to step 6.
1 Press [FUNCTION].
Privacy of communications may not be ensured when using this phone.
Power consumption
Standby: Approx. 2.2 W
Name
then sliding the unit down to secure it.
Name
ROBINSON, TINA
Phone Number
Shows which calls you
Connect the AC adaptor to power outlet.
83mm
102mm
I cannot dial the phone
- The phone number you dialed might have an incorrectly edited
Phone Number
1-555-321-5555
5 Press [EDIT].
2 Review phonebook items by using [ ] or [ ].
(3 1/4 inches) (A) (4 inches)
Maximum: Approx. 3.3 W
Shows which calls
number edited in the
pattern (for example, the long distance “1” or the area code
CAUTION:
NEW
have not checked.
•
There are two common types of wall
6/10 3:10
36
you have not
caller list.
is missing). Edit the phone number with another pattern.
Power supply
AC adaptor (120 V AC, 60 Hz)
PM CALL
6 Enter the phone number (max. 24 digits), using the dialing buttons [ 0 ] to
3 Press and hold [CLEAR] until “CLEAR ALL ?” is displayed.
checked.
phone plates. The distance between
(B)
Any changes or modifications not expressly approved by the party
[ 9 ], [
] or [
].
4 Press [CLEAR].
(A) and (B) may vary depending on
The 2nd caller’s
- In order to use Caller ID, Call Waiting, or Call Waiting Caller ID
responsible for compliance could void the user’s authority to operate this
• If a pause is required for dialing, [PAUSE] can be stored in a phone
information is not
(CWID), you must first contact your telephone service provider
The date and time the
The number of calls which
the size of the wall phone plate
device.
The date and time the
displayed during an
and subscribe to the desired service. After subscribing, you may
Note:
The number of calls which
number counting as one digit.
call has been received.
you have received.
installed.
(A)
outside call.
need to contact your telephone service provider again to activate
•
Design and specifications are subject to change without notice.
(ex. June 10, 3:10PM)
latest call has been
you have received.
• When you store the last number dialed, press [REDIAL] instead of
this specific service, even if you already subscribed to both
83mm
•
The illustrations in these instructions may vary slightly from the actual
received. (ex. June 10,
entering a phone number.
(3 1/4 inches)
Caller ID and Call Waiting with Caller ID services (CWID).
or
product.
3:10PM)
7 Press [EDIT].
102mm
(4 inches)
For assistance, please visit http://www.panasonic.com/phonehelp
For assistance, please visit http://www.panasonic.com/phonehelp
(B)
For assistance, please visit http://www.panasonic.com/phonehelp
For assistance, please visit http://www.panasonic.com/phonehelp