Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
THA13(e).book Page 9 Friday, March 10, 2006 2:24 PM
Introduction
L Use the cordless camera in a bright
For best performance
place such as under daylight or a well-lit
room.
L Do not use the cordless camera in the
Location
following places:
This unit communicates using radio
– near incandescent lamps.
waves.
– near any electrical appliance that
For maximum distance and noise-free
emits a strong radio signal.
operation, we recommend placing the
– where the subject of the picture is
product away from electrical appliances.
against a light source or in front of a
mirror.
Environment
– in places where temperature varies
greatly, such as near an air
L Keep the product away from electrical
conditioner or heater.
noise generating devices, such as
– any place exposed to oil or steam
fluorescent lamps and motors.
such as a kitchen.
L The product should be kept free from
– where an object such as glass can
excessive smoke, dust, high
cause temperature change due to
temperature, and vibration.
reflection.
L The product should not be exposed to
L In darker environments other than
direct sunlight.
daylight or in a well-lit room, the
L Do not place heavy objects on top of the
smoothness of motion decreases in
product.
order to keep the appropriate brightness
L The product should be kept away from
and sharpness of images. In such
heat sources such as heaters, kitchen
environments, the smoothness of
stoves, etc. It should not be placed in
motion may not increase/decrease
rooms where the temperature is less
much even if you change the display
than 5 °C (41 °F) or greater than 40 °C
sharpness settings (page 30).
(104 °F). Damp basements should also
L When using the cordless camera,
be avoided.
please take into consideration the rights
L Operating near 2.4 GHz electrical
of others with regard to privacy.
appliances may cause interference.
L When you move the cordless camera
Move away from the electrical
from a cold place to a warm place, wait a
appliances.
little while to let the cordless camera
adapt to the change in environment
Routine care
before use. In this case, condensation
such as the formation of dew may occur,
L Wipe the outer surface of the product
resulting in error or malfunction.
with a soft moist cloth. Do not use
benzine, thinner, or any abrasive
powder.
Operating conditions for the
cordless camera
Conditions for using the
To use the sensor detection feature of the
cordless camera
cordless camera, you need to change the
detection mode (page 32).
L The cordless camera is intended for
indoor use only. Prolonged exposure to
direct sunlight or halogen light may
damage CMOS sensor.
For assistance, please visit http://www.panasonic.com/phonehelp
9
...