• If the system’s memory becomes full during a message, the system stops recording and disconnects the call. Difficulty hear • Press ^ to increase speaker volume. ing messages System does not answer after correct number of rings • Make sure that the answering system is on. • If Toll Saver is activated, the number of rings changes to two when you have new messages (see page 32). • In some cases, the system may be affected by the ringing system used by the local telephone company. • If the memory

After the 2757 reboots, it will be ready with the new network settings. 26 2.7 Accepting and Making Phone Calls After completing the network and SIP settings, you can use the 2757 to make and accept phone calls. 2.7.1 Accepting phone calls Before you can receive phone calls, your phone must be registered to a SIP server. You will see the message below on the LCD screen when the phone is registered. If the phone is not registered to a SIP server, you will see ‘Initializing SIP …’ displayed on LCD

If you want to end the intercom transfer, hang-up the phone. To Set up a three-way conference During an external call it is possible to conference in another handset. During a call, press INTERCOM button and enter the number of the handset you want to connect to, by using the keypad. The display will show the handset name you have entered and the other handset will ring. If the number you have entered is not available, you will hear an ERROR tone and the call will be returned to the original han

If the answering machine memory is full, the Handset will display TAM FULL alternately with the handset's name or time, depending on the handset standby display mode set (see section 7.3.7), and you will have to delete some messages before any new ones can be recorded. Some answering machine functions can be operated from the base, including playing messages and turning the answering machine on or off. See section "3.2 Base Station with Telephone Answering Machine (TAM) Control" for further det

07:21 Page 2 STOP! See page 7 for easy instructions You must install and charge the battery before using the telephone For customer service or product Please also read information, visit our web site at Important Product Information Enclosed in product package or call 1-800-222-3111 CAUTION: To reduce the risk of fire or injury to persons or damage to the telephone, read and follow these instructions carefully: • Use only Replacement Battery 2422 (SKU# 23402). • Do not dispose of the battery in

CONTENTS Table of Contents .................................................................................1 Introduction ..........................................................................................3 Main features....................................................................................3 Package contents .............................................................................4 Product Overview..........................................................................

O Off During a call, press to hang up. During programming, press to stop without making changes. H Hold Press to place a call on hold. Press again to resume your call. <> Volume/Function During a call, press <> to adjust listening volume. While programming, press to change menu item or value (see page 10). Press > DIR when phone is not in use to display phone book entries (see page 18). While entering numbers or letters, press to advance cursor. Press < CID when phone is not in use to display Ca

UNKNOWN NAME Your phone company is unable to determine caller’s name. UNKNOWN CALLER Your phone company is unable to determine caller’s name or telephone number. 20 1 < CID PAT JOHNSON 1-800-555-6789 8/12 10:06AM NEW 03 2 < CHRIS WILLIAMS 1-800-555-1234 8/12 09:53AM NEW 02 3 < MARK CLAYTON 1-800-555-9876 8/12 09:12AM NEW 01 P PHONE ON 18005559876 To dial this number Caller ID To review your call log When the phone is not < CID to display information about the most (Highlight) To review your call

NOTE: To view another Speed Dial number, Press" OFF ". Follow the instruction" To call a Speed Dial Number " to display another Speed Dial number. To change or delete a Speed Dial number Press and hold a dial pad button (1-9) to display the entry you want. Press SELECT, then press ^ until the option you want is displayed (see page 19). 16 91-5624-40-00-ATT1465CIB.qxd 5/20/2004 4:08 PM Page 17 Directory Dialing PROG 1 DIRECTORY Entering names into directory To enter a name SELECT 2 ENTER NAME 3 P

Press MENU, then use the ^Vbuttons to scroll to the feature you want to change. As you scroll through the menu, the top menu item is always highlighted with a > character. Press SEL to select the highlighted item. Press OFF at any time to cancel an operation, back up to the previous menu, or exit the menu display. Ringer volume At this menu you can set a default ring volume level (1- 6), or turn the ringer off. Use the ^Vbuttons to hear an example of each volume level, then press SEL to select t