Press OFF to hang up. To preview numbers before dialing, then press PHONE to dial. Press V at any time to make corrections as you are entering numbers. Speed dialing & directory dialing To use speed dialing, press and hold a dial pad button (1-9) to display the number stored in that speed-dial location, then press PHONE to dial the number. To use directory dialing, press DIR, scroll or search to find the number you want, then press PHONE to dial the number. (See pages 15-19 to enter, edit or sea

.NOTE: To dial a memory number refer to page 16. 2 1 91-5393-20-00_ATT1440_R0 2003.3.7 10:47 AM Page 22 CALLER ID OPERATION About Call History If you subscribe to Caller ID service with your local phone service provider, this phone stores all incoming calls (up to 99 at the handset) with valid Caller ID information in the call log. Name, number, time and date information can all be stored, if they are sent with the call. Calls are automatically stored in the order they are received,with call “1”

All rights reserved. Printed in Mexico. 848233037 Issue 1AT&T aaaaaaaaaaaaa0 aaaaaaaaaaaa0 INSTALLATION Standard AC Outlet Modular Wall Jack AC Adapter Power Cord Telephone Line Cord 1 Insert the microcassette. Lift the cover and insert the 4 Set the Handset Ringer ON/OFF switch. Plug the other end of the line cord into a modular phone jack. Make 2 microcassette with the full reel to the right. Choose a spot near an electrical outlet and a telephone jack. Set the switch on the side of the handse

Press qCID or pDIR to scroll through menu items. Press MENU/SELECT to confirm or save changes to a highlighted menu item. Press OFF/CANCEL to cancel an operation, back up to the previous menu, or exit the menu display. Quick reference guide - telephone base CANCEL While in a menu, press to cancel an operation, back up to the previous menu or exit the menu display. Press and hold to go back to idle mode. When the telephone base is ringing, press to mute the ringer temporarily. qCID Press to displ

6. Press

Press and to select TIME FORMAT. 2. Press

Lift out the old battery and disconnect it from the handset. Follow the instructions above to install and charge the new battery. IMPORTANT INFORMATION: Use only the supplied rechargeable battery or replacement battery (model BT166342). To order, visit our website at or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Battery installation and charging Battery charging Once you have installed the battery, the screen indicates the battery status (see the table below). If necessary, place t

licensed to Advanced American Telephones. Net2Phone is a registered trademark of Net2Phone, Inc. © 2001 Advanced American Telephones. All rights reserved. Printed in China. Issue 1AT&T 7/01 INSTALLATION Before You Install 1 Choose a location for the base near an electrical outlet and a telephone jack. This phone requires a modular telephone jack and a standard electrical outlet (110v AC) not controlled by a wall switch. 2 3 Install the handset battery following Figure A below. Attach the belt cl

You can keep the battery charged by returning the handsets to their base unit or charger after each use. When the battery is fully depleted, a recharge takes about 12 hours. Average talk time on a fully charged battery is about eight hours depending on environmental conditions, standby time is approximately four days. Low battery indicator Return handset to base or charger to recharge when this symbol flashes. (Handset will beep when battery is low.) Plug the battery pack connector into hand

NOTE: To view another Speed Dial number, Press" OFF ". Follow the instruction" To call a Speed Dial Number " to display another Speed Dial number. To change or delete a Speed Dial number Press and hold a dial pad button (1-9) to display the entry you want. Press SELECT, then press ^ until the option you want is displayed (see page 19). 16 91-5624-40-00-ATT1465CIB.qxd 5/20/2004 4:08 PM Page 17 Directory Dialing PROG 1 DIRECTORY Entering names into directory To enter a name SELECT 2 ENTER NAME 3 P