Évaluations - 2, GPA: 3
(
)
)
|
Facilité d'utilisation
C/O Technical Documentation P.O. Box 2069 Bellingham, WA 98227-2069 Most importantly, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below. Grizzly Industrial, Inc. 1203 Lycoming Mall Circle Muncy, PA 17756 Phone: (570) 546-9663 Fax: (800) 438-5901 E-Mail: techsupport@grizzly.com Web Site: Read the manual before operation. Become familiar with this tool, its safety instructions, and its operation before beginning any work. Serious personal injury may result if safety or operational information is not understood or followed. TOOL DATA SHEET Customer Service #: (570) 546-9663 • To Order Call: (800) 523-4777 • Fax #: (800) 438-5901 HVLP SPRAY GUN SET MODEL H7671/H7672 MODEL H7671 CUP SIZE 100ml 600ml TYPE OF FEED GRAVITY GRAVITY FLUID TIP 0.8MM 1.4MM AIR CONSUMPTION 5 CFM 11 CFM INLET AIR PRESSURE 1.5-3.5 BAR 21-50 PSI 2.0-3.5 BAR 28.8-51 PSI FLUID PRESSURE LESS THAN 10 PSI LESS THAN 10 PSI CUP MATERIAL METAL METAL MAX. PATTERN WIDTH 190mm 230mm BODY MATERIAL POLISHED METAL POLISHED METAL MATERIAL USAGE SMALL TO MEDIUM SOLIDS MEDIUM TO HIGH SOLIDS WATERBORNE MATERIAL COMPATIBLE YES YES H7672 100ml GRAVITY 0.8mm 5 CFM 1.5-3.5 BAR 21-50 PSI LESS THAN 10 PSI PLASTIC 190mm POLISHED METAL SMALL TO MEDIUM SOLIDS YES 600ml GRAVITY 1.4mm 11 CFM 2.0-3.5 BAR 28.8-51 PSI LESS THAN 10 PSI PLASTIC 230mm POLISHED METAL MEDIUM TO HIGH SOLIDS YES -8-Model H7671/H7672 HVLP Spray Gun SECTION 3: SET UP Inventory Your spray gun left our warehouse in a carefully packed box. If you discover the spray gun is damaged after you have signed for delivery, please immediately call Customer Service at (570) 546-9663 for advice. Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult. After you have unpacked the carton you should find the following: Model H7671 Inventory (Figure 1) A. Large Spray Gun ............................... 1 B. Cup 600ml.......................................... 1 C. Small Spray Gun................................ 1 D. Cup 100ml.......................................... 1 E. Cleaning Brushes............................... 2 F. Service Wrenches.............................. 2 G. Filters ................................................. 4 H. Regulators.......................................... 2 I. Baffle Wrenches................................. 2 B C E A D F G HI Figure 1. Model H7671 inventory. Model H7672 Inventory (Figure 2) A. Large Spray Gun . ............................. 1 B. Cup 600ml.......................................... 1 C. Small Spray Gun................................ 1 D. Cup 100ml.......................................... 1 E. Cleaning Brushes............................... 2 F. Service Wrenches.............................. 2 G. Filters ................................................. 4 H. Regulators.......................................... 2 I. Baffle Wrenches................................. 2 Figure 2.Model H7672 inventory. B C E A D F G H I Model H7671/H7672 HVLP Spray Gun -9 Assembly Controls 1. Insert the filter into the gun body (see Figure 3). Figure 3. Installing filter. 2. Screw the cup onto the top of the body. 3. Attach the air hose to the spray gun with a 1.4" NPS quick connect fitting (not included). 4. Attach the spray gun to an air hose regulated between 29 and 50 PSI. Note: For the best results, use a hose that will be dedicated for spray use only. Do not use a hose that has been used with an in-line oiler or other possible contaminant. If you need additional help with this assembly, call our Technical Support at: (570) 546-9663. Figure 4. Controls. Fluid Control Pattern Control Atomizing Cap Trigger Air Flow Control Regulator Control 1. Fluid Control: Controls the volume of material that travels through the fluid tip. 2. Pattern Control: Adjusts the spray pattern from a round pattern to a wide fan. 3. Air Flow Control: Controls the fluid pressure inside the spray gun (H7672 only). 4. Atomizing Cap: Controls the spray pattern from vertical to horizontal. 5. Trigger: Two stage trigger. Stage one only releases compressed air for blowing off the work piece. Stage two sprays material. 6. Regulator/Gauge: Regulates inlet air pressure to the spray gun. It can be attached directly to the gun for on- the-spot air adjustments or directly from the air source. Note: DO NOT attach the regulator to an unregulated air source that exceeds 120 PSI. -10- Model H7671/H7672 HVLP Spray Gun SECTION 4: OPERATIONS EXPLOSIONHAZARD!DONOTsmoke or have any source of flame or spark near spraying.Vapors will explode if ignited. RESPIRATORY HAZARD! Always useaNIOSH approved respirator when using spray equipment. Failure to protect your lungs can lead to respi- ratory illness and nervous system damage. Spraying The Model H7671/H7672 HVLP spray gun set is designed to spray a wide variety of materials like lacquers...