Évaluations - 3, GPA: 3
(
)
)
|
Facilité d'utilisation
Do not approved garment. smoke in the spraying area or when 16. INAPPROPRIATE USE. DO NOT spraying. point or shoot spray gun directly 9. FIRE EXTINGUISHERS. Always at yourself or another person or animals. Do not attempt to use the spray gun for any other use than it have a fully charged multi-class or class B fire extinguisher in the was intended. immediate area. 17. STORAGE. Thoroughly clean and 10. AVOID UNINTENTIONAL dry spray gun before storage. Store OPERATION. Always disconnect air in an approved cabinet. when not in use, and do not carry 18. BE AWARE OF HOSE LOCATION. tool with hand on trigger. Hoses can easily become a tripping 11. KEEP CHILDREN AWAY. Prevent hazard when laid across the floor in children from injury by keeping a disorganized fashion. them away from this spray gun. 19. SOLVENTS. Always store solvents Disconnect and lock the spray gun and shop towels soaked in solvent in away when not in use. approved containers. 12. AVOID USE WHEN TIRED OR ON 20. LOCAL LAWS. Consult local DRUGS OR ALCOHOL. Avoid using authorities regarding exhaust and this spray gun if you are overly tired waste disposal requirements. or intoxicated. Using this spray gun during these times may increase the risk of injury or fire. -2- Model H8222 Spray Gun Model H8222 Spray Gun -3- INTRODUCTION The specifications, details, and photographs in this manual represent the Model H8222 as supplied when the manual was prepared. However, owing to Grizzly’s policy of continuous improvement, changes may be made at any time with no obligation on the part of Grizzly. If you have any comments regarding this manual, please write to us at the following address: Grizzly Industrial, Inc. C/O Technical Documentation P.O. Box 2069 Bellingham, WA 98227-2069 Email: manuals@grizzly.com Most importantly, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below. Grizzly Industrial, Inc. 1203 Lycoming Mall Circle Muncy, PA 17756 Phone: (570) 546-9663 Fax: (800) 438-5901 E-Mail: techsupport@grizzly.com Web Site: Foreword Specifications Cup Size ..........................................1000cc Feed Type ....................................... Siphon Fluid Tip Size ................................... 2.0mm Air Consumption .................... 4.2–7.1 CFM Operating Pressure Range ........ 45–60 PSI Max. Air Pressure .......................... 120 PSI Cup Material ............................... Aluminum Pattern Width .......................... 150–200mm Body Material .................................Chrome Air Inlet Size ...................................1.4" NPT Read the manual before operation. Become familiar with this tool, its safety instructions, and its operation before beginning any work. Serious personal injury may result if safety or operational information is not understood or followed. SETUP Inventory Your spray gun left our warehouse in a carefully packed box. If you discover the spray gun is damaged after you have signed for delivery, please immediately call Customer Service at (570) 546-9663 for advice. Save all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a shipping claim can be difficult. After you have unpacked the box you should find the following: Model H8222 Inventory (Figure 1) Qty A. Spray Gun.......................................... 1 B. Cup .................................................... 1 C. Multi-Wrench...................................... 1 D. Cleaning Brush .................................. 1 E. Barbed Hose Fitting (not shown) ....... 1 BA C D Figure 1.Model H8222 inventory. Setup Before assembling and using the spray gun, thoroughly clean and dry all parts. Please refer to Cleaning in the MAINTENANCE section on Page 10 for more detailed instructions. Make sure all connections are tight enough to prevent air leaks but not so tight as to damage the tool. To setup the spray gun: 1. Attach the gun body to the cup as shown in Figure 2. Figure 2. Model H8222 gun body installation. Gun Body Cup Connection Point Air Fitting 2. Attach the air hose directly to the air fitting on the spray gun or with a female 1.4" NPT quick connect fitting (not included). 3. Attach the spray gun to a filtered, regulated air source. See the Specifications on Page 3 for your spray gun air pressure requirements. Note: For the best results, use a hose that will be dedicated for spray use only. Do not use a hose that has been used with an in-line oiler or other possible contaminant. -4- Model H8222 Spray Gun Controls Figure 3. Controls. Pattern ControlAtomizing Cap Trigger Fluid Control Air Flow Control Cup 1. Fluid Control: Controls the volume of material that travels through the fluid tip. 2. Pattern Control: Adjusts the spray pattern from a round pattern to a wide fan. 3. Atomizing Cap: Controls the spray pattern from vertical to horizontal. 4. Trigger: Squeeze the trigger half way to blow air, o...