Évaluations - 3, GPA: 3.7
(
)
)
|
Facilité d'utilisation
pr viding "PROGRESSIVE SOLUTIONS" for your industrPROGRESSIVE SOLUTIONS for your industry yy. .. pro ooviding PROGRESSIVE SOLUTIONS pro ooviding WARNINGS: Always unplug unit before attempting to service. Never spray flammable material. Do NOT operate near flammable materials. Use only original manufacturer parts. Do NOT modify from original specifications. Replace damaged hoses immediately. Always wear protective clothing and eye wear when operating. Release pressure before disconnecting spray control gun and spray wand. Disconnect or unplug unit when not in use. Never immerse pump. ! ! Pump will not start: • Check the circuit breaker • Check for proper voltage (+/-10%) & good electrical connections • Check pressure switch for proper operation • Check motor for an open or grounded circuit • Check for a locked drive assembly Leaks from pump head or switch: • Check for loose screws at the switch or pump head • Switch diaphragm may be torn or pinched Noisy or Rough Operation: • Check for loose upper housing or drive screws • Is the surface that the pump is sitting on magnifying the normal noise Pump will not shut off: • If recirculator is installed it will need to be adjusted to 175psi for the pressure switch to operate • Check that the outlet hose is closed an does not leak • Check for trapped air in the head or outlet hose • Check for proper operating voltage (+/-10%) to pump • Check valve assembly for wear • Check for loose drive assembly or upper housing screws • Check pressure switch to verify it has moved out of adjustment Pump will not prime: • Out of product • Check for debris in strainer • Check for vacuum leak in suction hose • Check suction tube and outlet hose for kinks or clogs • Check for debris in valve plate • Check for proper operating voltage (+/-10%) with the pump operating • Check upper housing for cracks • Be sure spray control handle and spray tip are open and free of debris • If pump has been sitting try turning the unit upside down and pour water into suction hose or attach a garden hose the suction hose and turn the garden on. Then turn the unit on. This procedure will force water thru the valves them if they are sticking. If you have any please feel free 800.801.7832 PN:01088 “REAL PumpREAL Pump Power Spraying SystemPower Spraying System - Owners ManualOwners Manualrev0209rev0209 “REAL PumpREAL Pump Power Spraying SystemPower Spraying System - Owners ManualOwners Manualrev0209rev0209 DIRECTIONS FOR USE: FOR USE WITH ALL FOR USE WITH ALL “REAL” PUMP REAL PUMP 1) Position the unit on top of the container you wish to dispense from and POWER SPRAYERS POWER SPRAYERS insert the suction hose. The brass suction nozzle has been threaded so that a garden hose may be connected to lengthen the suction line or give the operator the ability to spray water. The maximum vertical self prime is 15 feet. 2) Check the switch to be sure it is in the "OFF" position, then connect the power source. AC - Insert the plug into a grounded outlet. DC - Connect the RED (+) clamp to the positive battery terminal. Then connect the BLACK (-) clamp to a grounded metal portion of the chassis or engine. For stand alone battery applications the BLACK (-) clamp may be connected directly to the negative battery terminal. 3) Squeeze the spray control gun or remove the spray control gun. Insert end into container. Move switch to the "ON" position and allow the unit to prime. 4) When primed, move switch to "OFF" and connect the spray control gun and wand if not already connected. If the product must be circulated before spraying, leave unit "ON" with hose or wand end in the container and allow product to circulate. *A bypass is available for products that need to be continuously circulated. DIRECTIONS FOR CLEANING: MUST BE CLEANED AFTER EVERY USE! 1) After spraying, remove the suction hose from the container. Insert the wand end into the container and hold the spray control gun in the OPEN position. Allow the unit to expel the unused material back into the container. The wand and the spray tip are left attached for this process to provide a back pressure that will help expel 90% of the unused material out of the unit. 2) Then circulate either soap and water or other recommended cleaning solution through the unit until it comes out clean and clear. NEVER USE STRAIGHT XYLENE. Soap and water or diesel are best. 3) Drain all liquid from the pump. Do NOT allow liquid to freeze in the pump. Failure to do this will result in damage to the inte...
Ce manuel est également adapté pour les modèles :Guns - Paint Sprayer (206.31 kb)