Log:
Évaluations - 3, GPA: 3.3 ( )

Instructions COBY electronic, Modèle CD-RA145

Fabricant : COBY electronic
Taille : 960.63 kb
Nom Fichier : f6b7aacf-3623-45dd-8b6b-08fc4c48eb6d.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


ALARM1 Switch 3. Function Switch 4. CLOCK SET Button 6. PROG Button 8. POWER/ALARM OFF Button 9. CD Door 10. ALARM2 Switch 11. SLEEP Button 12. CD/DISPLAY Buttton 13. MIN.REW Button 14. HOUR/F.FWD Button 5. RANDOM Button 7. REPEAT Button 15. Band Selector 16. STOP Button 17. PLAY/PAUSE Button 18. SNOOZE Button 19. FUNCTION Lights 20. PM Light 21. ALARM1 Light 22. Display 23. ALARM2 Light 24. Dial 25. TUNING Rotary 26. VOLUME Rotary Always operate the product from a power supply of the same voltage, frequency and rating as indicated on the product identification plate. Do not operate product with a damaged cord or plug. Never install the unit where there are heat sources such as radiators, heat registers, stoves, direct sunlight, excessive dust or where there is mechanical vibration or shock. Switch off and unplug from AC outlet when not in us Only compact discs identified with this mark can be used with this player. IMPORTANT The CD mechanism and the sensitive circuitry may cause interference to a radio tuner nearby. Do not operate this unit while operating other radio devices. Danger This product utilizes invisible laser radiation. Avoid direct exposure to the beam. Caution Use of controls, adjustments or procedures not listed in this manual may result in hazardous radiation exposure. Handle your unit with care to extend the life of the unit. Use a soft and clean cloth damped with plain lukewarm water to clean the exterior of the unit. Never use solvents such as benzene or other strong chemical cleaners since these could damage your unit. It is important that no liquid reaches the inside of the unit. Do not touch the CD laser part or look directly at it. 1 Please read and follow the instruction manual carefully before operating in order to avoid any damage to the unit. The player operates on AC 110V/60Hz household mains supply. Before connecting to the power supply, ensure that the rated voltage of this unit matches your local voltage. Warning: Disconnect the unit from the main power supply when not in use. To avoid the risk of electric shock, do not remove the cover of the apparatus. To prevent fire or shock hazard, do not expose the apparatus to rain or moisture. A 9V type 006P battery is to be put in the battery compartment of the CD room for clock back-up only. Replace the battery every six months. Remove the battery if the player will not be in use for a long period of time. Once the player is powered, it goes to the standby mode. The system clock will display time under the standby mode. Refer to clock setup section for time setting. 2 1. Plug power cord into power souce. 2. The flashing "12:00 " will appear on the screen. 3. Hold down CLOCK SET button by one hand while by the other hand, press MIN.REW BUTTON to adjust minutes and HOUR.FWD button to adjust hour. 4. Release CLOCK SET button after adjusting. 5. The clock starts with the set time. Time will always be shown on the LCD screen except for the period of setup execution. Wake up to Radio/CD /Buzzer Select a means of wake-up by FUNCTION switch before or after time setting. MODE MEANS OF WAKE UP Radio mode Radio broadcasting. CD mode CD playback Buzzer mode Beeping. If you want to wake to radio or CD playback, select a radio station or a CD disc and set the volume to a proper level. Set Alarm1 1. Slide the ALARM1 switch to SET position. 2. Press MIN.REW button to set minutes and HOUR/F.FWD button to set hours. 3. Slide the ALARM1 switch to ON position. The ALARM1 SET ON indicatior lights up in red. 4. The alarm will go off at the set time. 5. To interept alarming, press SNOOZE button. 6. To stop alarming, press POWER/ALARM OFF button. 6. To disable alarm setting, push the ALARM1 switch to OFF and the ALARM1 SET ON indicator turns off. Set Alarm 2 (Refer to alarm1 setup) 3 Snooze to repeat alarm 1. When alarm comes on you can temporarily turn it off by pressing the SNOOZE button. Approximately 6 minutes later the alarm will resume. This operation cycle will be repeated up to five times within an hour, and then automatically release the wake up function. 2. To cancel the snooze operation, slide the ALARM1 switch to "OFF" position 1. Slide FUNCTION switch to RADIO. 1. Slide FUNCTION switch to RADIO. If the player is under the standby mode, press POWER button to set the player ready for function. 2. Select AM or FM with BAND selector. 3. Get to the desired station by TUNING rotary 4. Adjust the volume with VOLUME rotary 5. Extend antenna and adjust the direction to obtain the optimum reception. 6. Press POWER button to get to the standby mode. Sleep Function Radio broadcasting will last for a preset period of time and then shut off automatically. The system is preset with the following sleep periods : 90 minutes 60 minutes 30 minutes 1. Repeatedly press SLEEP button till desired sleep period appears. Sleep indicator flashes red. 2. Sleep function will be activated once the sleep indicator turns still after a few seconds flashing. 3. To quit sleep f...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories