Évaluations - 4, GPA: 3.8
(
)
)
|
Facilité d'utilisation
• Children should be supervised to ensure that they do not play with the appliance.. Electro-magnetic fields This appliance complies with the statutory limits for electro-magnetic compatibility! If you still have any doubts regarding its use in bedrooms: • Place the appliance about half a meter from the bed. From this distance the electro magnetic fields are no longer effective even for electro sensitive people itself. - 4 IB_KH2201_02_AR909_UK_3.qxd 12.11.2007 10:52 Uhr Seite 5 ..Note: This appliance is equipped with non-slip rubber feet. As floor and furniture upper surfaces comprise of various materials and are cleaned with various types of polishes and/or cleaning agents, it cannot be completely excluded that some of these substances contain components that could attack the rubber pads and soften them. If possible place an anti-slip material under the feet of the appliance. ..Note: In certain countries there could be special regulations in force regarding the allocated radio frequency ranges. Take note that you may not exploit these radio services, pass details heard from them on to third parties or otherwise improperly misuse them. Intended Use The equipment is intended for employment as an alarm clock, using a tone signal, and for receiving radio transmissions. Any other usage of, or modification to, the appliance is deemed to be improper usage and carries the risk of serious personal injury. The manufacturer accepts no liability for damages that result from improper use of the appliance or are caused by the incorrect operation of it. Not intended for commercial use. - 5 IB_KH2201_02_AR909_UK_3.qxd 12.11.2007 10:52 Uhr Seite 6 Items supplied After unpacking the appliance, immediately check to determine that all listed items are present and that the appliance is in a faultless condition. 1 Projection clock with radio, 1 Operating manual The batteries and a 3V-mains adaptor (accessories), required for operation, are not included in the supply. Operating Elements q Projection lens w Telescopic antenna e Button Snooze r Projection, Display illumination t Display y Frequency scale u Button Alarm i Button Hour o Button Time a Button Min (Minute) s Loudspeakers d Projection focus f Tuning wheel g Volume controller VOLUME / BUZZ h External 3V Direct current connection for 4.0 mm x 1.7 mm barrel connector j Battery Compartment k Switch-Projection ON/OFF l Switch - Alarm ON/OFF ; Waveband selector FM/AM 2) Stand-up support (only Model KH 2202) - 6 IB_KH2201_02_AR909_UK_3.qxd 12.11.2007 10:52 Uhr Seite 7 Technical data Power rating: 3 V Rated current : 300 mA Frequency range : FM (VHF) 87.5 - 108 MHz AM (MW) 530 - 1600 kHz Dimensions: KH 2201 14.2 cm x 13.1 cm x 3.8 cm KH 2202 17 cm x 8.8 cm x 4.2 cm Weight : KH 2201 and KH 2202: ca. 245 gr. Operating temperature : 5°C - 40°C at <85% rel. humidity Batteries: (Batteries not supplied) • Model KH 2201: 1.5 V Type Mignon/AA • Model KH 2202: 1.5 V Type Micro/AAA • 2 x 1.5 V for radio operation, display illumination and projection • 1 x 1.5 V for the LCD clock (the compartment is described in “CLOCK USE“) Mains adapter: (Item not supplied) Rated voltage: DC 3V (+/- 5%) Rated current : min. 300 mA Barrel connector: 4.0 mm x 1.7 mm When using a 3 V mains adaptor, a battery must be inserted into the compartment “CLOCK USE”. Otherwise, the clock will not function. - 7 IB_KH2201_02_AR909_UK_3.qxd 12.11.2007 10:52 Uhr Seite 8 Placement • Place the projection clock onto a level surface. • Position the projection clock such that the projection lens q is directed onto an empty surface. Only Model KH 2202: • Fold out the stand-up support 2). Operation Connect the external mains adaptor This appliance can be operated with an external mains adaptor. Please use only mains adaptors that meet these specifications: Rated voltage: Rated current : Barrel connector: DC 3V (+/- 5%) min. 300 mA 4.0 mm x 1.7 mm Attention: Make certain that the polarity is correct – both for the batteries as well as for the mains adaptor. Take note of the markings on the 3V direct current connection h . False polarity will damage the appliance. - 8 IB_KH2201_02_AR909_UK_3.qxd 12.11.2007 10:52 Uhr Seite 9 Radio operation 1. To switch on, turn the volume controller VOLUME / BUZZ g, until an audible »Click« is heard. 2. Using the volume controller VOLUME / BUZZ g now set the desired volume. 3. Set the waveband selector switch ; to the desired wavelength range (FM/AM). 4. Adjust the tuning wheel fto select the desired radio station. The frequencies can be read off from the frequency scale y. 5. To switch off, turn the volume controller VOLUME / BUZZ g until an audible »Click« is heard (KH 2201.Turn the volume controller upwards, KH 2202: Turn the volume controller to the rear). Setting up the telescope aerial On Model KH 2201: • Extend the telescope aerial w completely. The telescope aerial w on Model KH 2201 is not rotatable. If you try to turn the telescope aerial w, the aerial mounting will be damaged. On ...
Ce manuel est également adapté pour les modèles :Horodateurs - KH 2201 (596.84 kb)