Log:
Évaluations - 4, GPA: 4.8 ( )

Instructions Lathem, Modèle 1000E

Fabricant : Lathem
Taille : 469.56 kb
Nom Fichier : bad04009-2235-4182-a5d2-dafb4385128b.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


No further manual setting is necessary. SETTING THE STARTING DATE OF DAYLIGHT SAVING TIME Example: Daylight saving time starts on Sunday, March 25, 2001. Year DateMonth D.S.T. START SELECT CHANGE SET SELECT D.S.T. START CHANGE SET SELECT D.S.T. START CHANGE SET 16 SELECT D.S.T. START CHANGE SET Step 1 Press the SELECT button and position the " " mark at the "D.S.T. START". At that moment, the "Year" flashes. (The flashing means it can be changed.) Change the "Year". In case of the example, press the CHANGE button to set at "01". And then press the SET button. At that moment, the flashing changes from "Year" to "Month". Step 2 Change the "Month". Press the CHANGE button to set at "3". And then press the SET button. At that moment, the flashing changes from "Month" to "Date". Step 3 Change the "Date". Press the CHANGE button to set at "25". And then press the SET button. Step 4 After you finish setting the starting date of D.S.T., press the SET button once again. Now the starting date of D.S.T. setting has been completed. Go on to the "SETTING THE ENDING DATE OF DAYLIGHT SAVING TIME". SETTING THE ENDING DATE OF DAYLIGHT SAVING TIME Example: Daylight saving time ends on Sunday, October 28, 2001. Year DateMonth D.S.T. END SELECT CHANGE SET D.S.T. END SELECT CHANGE SET D.S.T. END SELECT CHANGE SET D.S.T. END SELECT CHANGE SET Step 1 Press the SELECT button and position the " " mark at the "D.S.T. END". At that moment, the "Year" flashes. (The flashing means it can be changed.) Change the "Year". In case of the example, press the CHANGE button to set at "01". And then press the SET button. At that moment, the flashing changes from "Year" to "Month". Step 2 Change the "Month". Press the CHANGE button to set at "10". And then press the SET button. At that moment, the flashing changes from "Month" to "Date". Step 3 Change the "Date". Press the CHANGE button to set at "28". And then press the SET button. Step 4 After you finish setting the ending date of D.S.T., press the SET button once again. Now the ending date of D.S.T. setting has been completed. Replace the cover and lock. IMPORTANT: If you do not complete Step 4, the clock will not print. DELETING THE DAYLIGHT SAVING TIME SETTING To delete and cancel the daylight saving time setting, change the display of "Month" of the starting setting to " ". Example: Change March 25, 2001 of "D.S.T. START" and delete daylight saving time setting. D.S.T. START SELECT CHANGE SET D.S.T. START Year DateMonth SELECT CHANGE SET D.S.T. START SELECT CHANGE SET D.S.T. START SELECT CHANGE SET Step 1 Press the SELECT button and position the " " mark at the "D.S.T. START". At that moment, the "Year" flashes. (The flashing means it can be changed.) Next, press the SET button. At that moment, the flashing changes from "Year" to "Month". Press the CHANGE button to set at Step 2 " ". And then press the SET button. At that moment, the flashing changes from "Month" to "Date". Step 3 Press the SET button again. At that moment, the flashing changes from "25" to " ". Step 4 Press the SET button once again. Now the D.S.T. deleting has been completed. Replace the cover and lock. IMPORTANT: If you do not complete Step 4, the clock will not print. SETTING THE PASSWORD When the password is set, you are asked to enter it. If the password you entered does not coincide with the setting, you cannot change the setting values. You may set a password by any 4-digit number from 0001 to 9998. Note a number "0000" and "9999" cannot be used as a password. REGISTERING THE PASSWORD Example: Set the password "1234". Step 1 Press the SELECT button and position the " " mark at the "PASSWORD". At that moment, first two digits flash. (The PASSWORD SELECT CHANGE SET flashing means it can be changed.) In case of the example, press the CHANGE button to set at "12". And then press the last two digits. PASSWORD SELECT CHANGE SET Step 2 In case of the example, press the CHANGE button to set at "34". And then press the PASSWORD SET button. SELECT CHANGE SET Step 3 MOTUWETH FRSASU After you finish registering the password, press the SET button once again. Now the password registering has been completed. Replace the cover and lock. IMPORTANT: If you do not complete Step 3, the clock will not print. SET button. At that moment, the flashing changes to HOW TO CHANGE SETTING WHEN THE PASSWORD IS SET Once the password is set, you have to enter the password for changing any setting. "99 99" will be displayed when you press the SELECT button before entering. Example: Password "1234". SELECT CHANGE SET SELECT CHANGE SET TIME SELECT CHANGE SET SELECT CHANGE SET Step 1 Press the SELECT button, at that moment "99 99" is displayed and first two digits flashes. (The flashing means it can be changed.) In the example, press the CHANGE button to set at "12". And then press the SET button. At that moment, the flashing changes to last two digits. Step 2 In case of the example, press the CHANGE button to set at "34". And then press the SET butt...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories