Évaluations - 3, GPA: 4.3
(
)
)
|
Facilité d'utilisation
Create sounds effects enlarging the stereo image. Eliminate feedback using very sharp Q control on selected frequencies. Overboost or overattenuate selected frequencies thanks to the overlapping frequency range of the five bands available. 5.3 Application on single instrument If you wish to use your LTO-Q as an "in line" processor and use it for single instrument equalisation, you must connect the output of the instrument to the input of your LTO -Q and the output of the LTO -Q to the input of an amplifier. Stereo Program Source Main Output Input MIC level signal OUTPUT INPUT TIP / PIN 2 RING / PIN3 SLEEVE / PIN 1 TIP / PIN 2 RING / PIN3 SLEEVE / PIN 1 110-120V 220-240V 2 1 3 NEW TIDE 2 1 3 NEW TIDE AC INPUT 95-120V /210-240V 60-50Hz Rated Power Consumption 9W FUSE: 210-240V: T200mAL 250VAC 95-120V: T315mA 250VAC REPLACE FUSE WITH CORRECT TYPE ONLY Apparaten skall anslutas till jordat uttag nar den ansluts till ett natverk A101 5.4 Application on main MIX Follow this chart and you will use the total flexibility of your LTO-Q on the Main Mix. 110-120V 220-240V AC INPUT 95-120V /210-240V 60-50Hz Rated Power Consumption 9W FUSE: 210-240V: T200mAL 250VAC 95-120V: T315mA 250VAC REPLACE FUSE WITH CORRECT TYPE ONLY Apparaten skall anslutas till jordat uttag nar den ansluts till ett natverk A101 OUTPUT INPUT TIP / PIN 2 RING / PIN3 SLEEVE / PIN 1 TIP / PIN 2 RING / PIN3 SLEEVE / PIN 1 2 1 2 1 3 NEW TIDE 3 NEW TIDE Insert Main Output MIC level signal 9 6. TECHNICAL SPECIFICATIONS AUDIO INPUT Type Active balanced XLR and 1/4" JACK Impedance Balanced: 50kOhm Unbalanced: 25kOhm Operating level +4dBu/ 10dBV Maximum input level Balanced and Unbalanced: +18dBV CMRR >55dB @1kHz AUDIO OUTPUT Type XLR and 1/4" JACK Impedance Balanced: 60Ohm Unbalanced: 30Ohm Maximum output level +18dBV SYSTEM SPECIFICATIONS Bandwidth 18Hz to 30kHz at 3dBV THD+N% 0.02% typ. 1kHz, @+4dBu 0.04% typ. 1kHz, @ 10dBu IMD 0.01% typ Noise >-92dBr unweighted 22Hz to 22kHz Frequency response 18Hz to 28kHz, 3dB Low cut Variable (10Hz to 400Hz) High cut Variable ( kHz to kHz)2.5 30 PARAMETRIC FILTER Level Variable ( 15dB) Frequency Band1: 20Hz to 400Hz Band2: 60Hz to 1kHz Band3: 150Hz to 2.5kHz Band4: 500Hz to 8kHz Band5: 1kHz to 20kHz Bandwidth Variable (0.03 to 1.6 octaves) FUNCTION SWITCHES Audio IN/OUT Relay controlled hard bypass I/O meter IN/OUT Switches the meter display from input to output IN/OUT Activates each filter band INDICATORS Input/output level 12-segment LED display: -30/-24/-18/-12/-6/-3/0/+3/+6/+9/+12/+18dB Function switch LED indicator of every switch POWER SUPPLY Main voltages AC: 210 240VAC~50Hz AC: 95 120VAC~60Hz Power consumption 9watts Fuse 210 240V: T200mAL 250VAC 95 120V: T315mA 250VAC PHYSICAL Dimension 483(W) 194.1(D) 44(H)mm Weight 3.23kg 10 7. WARRANTY 1. WARRANTY REGISTRATION CARD To obtain Warranty Service, the buyer should first fill out and return the enclosed Warranty Registration Card within 10 days of the Purchase Date. All the information presented in this Warranty Registration Card gives the manufacturer a better understanding of the sales status, so as to purport a more effective and efficient after-sales warranty service. Please fill out all the information carefully and genuinely, miswriting or absence of this card will void your warranty service. 2. RETURN NOTICE 2.1 In case of return for any warranty service, please make sure that the product is well packed in its original shipping carton, and it can protect your unit from any other extra damage. 2.2 Please provide a copy of your sales receipt or other proof of purchase with the returned machine, and give detail information about your return address and contact telephone number. 2.3 A brief description of the defect will be appreciated. 2.4 Please prepay all the costs involved in the return shipping, handling and insurance. 3. TERMS AND CONDITIONS 3.1 LTO warrants that this product will be free from any defects in materials and/or workmanship for a period of 1 year from the purchase date if you have completed the Warranty Registration Card in time. 3.2 The warranty service is only available to the original consumer, who purchased this product directly from the retail dealer, and it can not be transferred. 3.3 During the warranty service, LTO may repair or replace this product at its own option at no charge to you for parts or for labor in accordance with the right side of this limited warranty. 3.4 This warranty does not apply to the damages to this product that occurred as the following conditions: Instead of operating in accordance with the user's manual thoroughly, any abuse or misuse of this product. Normal tear and wear. The product has been altered or modified in any way. Damage which may have been caused either directly or indirectly by another product / force / etc. Abnormal service or repairing by anyone other than the qualified personnel or technician. And in such cases, all the expenses will be charged to the buyer. 3.5 In no event shall LTO be lia...