Évaluations - 2, GPA: 4
(
)
)
|
Facilité d'utilisation
User can narrow down or enlarge the display by selecting a desired value. 9.7.8-Phase: Using the Right/Left movement buttons, you can ensure that the colours and shapes are exactly consolidated on the PC image. 9.7.9-PICTURE FORMAT You can select the PC image to be displayed in 16:9 or 4:3 formats. 9.8- Inserting the CI (Common Interface) card CI module and Smart card allows you to view some scrambled (paid) channels in Digital TV mode. When no CI module is inserted in your television, you can only view the current unscrambled digital/analogue channels. 9.8.1-Inserting the CI Module and Smart card You can not use the smart card in your television independently. You will need a CAM module to use the smart card. Insert your smart card into the CAM module and then insert the CAM Module into the CI slot on your television. When you insert the module correctly, CA Module Inserted appears on the screen and the menu for this module is displayed. Rear or side view of the TV 9.8.2-Removing the CI Module and Smart card When removing the Smart card, make sure that you pull the CAM module out completely with the card inserted. CA Module is not inserted will appear on the screen. 29 10 Help and tip10 Help and tips Failure Possible cause Solution The television does not function Is the power cable connected to the mains supply? Check the power cable. Is the Power On/Off button on? Check if the On/Off button is on. Poor picture quality Is the antenna cable connected? Check the antenna cable. If you are using a satellite antenna, is it well adjusted? Have the antenna adjusted. Antenna may be affected by two connected external devices. Try disconnecting one of the devices. It may need fine tuning. Perform fine tuning. Picture settings are not correct. Adjust Brightness, Contrast and Colour. Shadow and reflection in the picture. Channel setting Perform automatic, manual channel setting or fine tuning. Antenna Check antenna cable and system No picture Is there any damage to the antenna cable? Check the antenna cable. Are you sure you pressed the correct button on your remote control? Press the PR+ or PR- button to turn on the TV. No colour. Colour intensity level is at the lowest setting. Increase the colour. Broadcast system setting (if setting choice is available) Select the broadcast system. Problem in channel broadcasting. Test with another channel. No or defective teletext Television channel (no teletext) or antenna system. Test another channel for fine tuning and shadowy pictures Very weak signal Check the antenna system. No sound Temporary sound mute may be on Try pressing the mute button Is the sound turned down? Turn on the volume with Vol + button. Remote control does not work Are the batteries correctly placed? Place the batteries correctly. Are batteries exhausted? Replace the batteries with new ones. Is there any obstacle between the remote control and television? If yes, remove it. Picture is not visible after turning on the TV Child lock is active. Disable the child lock. If your television does not work properly even though you tried the above mentioned solutions, try turning it on and off again. If you cannot start your television even though you have applied all noted methods, refer to the dealer or authorised service from where you purchased the product. Never attempt to repair a faulty TV yourself. 30 11 Technical Specifications Char11 Technical Specifications Chart SCREEN SIZE 37” Panel type 37”, 16:9 Active matrix TFT Sound output 2x10 W Power consumption 180 W Stand by power value <1 W SCART input Standard Audio/Video Phono input Standard S-Video socket Standard HDMI input 1/2 Standard YPBPR input Standard VGA input Standard PC Audio input Standard CI Slot Input Standard Dimensions (WxDxH) 930x251x671 Weight (Kg) 19,6 General technical specifications Power supply AC: 230V 50 Hz Program memory: 100 RF Aerial input: 75 Ohm (Co-axial) Loudspeaker impedance: 8 Ohm Sound systems: Mono / Stereo Batteries: 2xUM - 4, IEC R03 or AAA 1.5V Channels received: VHF (Band I Channel 2-4) VHF (Band III Channel 5-12) UHF (Channel 21-69) Cable TV (S1-S20/S21-S41) Design and specifications may be changed without prior notification. 31 12 MAIN UK TRANSMITTER STATION12 MAIN UK TRANSMITTER STATIONS UHF CHANNELS STATIONS CT D Regional Main stations BBCI BBC2 ITV CH4 CH5 Map BBCI BBC2 ITV CH4 CH5 Map North West Caldbeck 30 34 28 32 56 12 Bluebell Hill 40 46 43 65 29 Winter Hill 55 62 59 65 48 15 Crystal Palace 26 33 23 30 37 28 Douglas (IOM) 68 66 48 56 56 45 Dover 50 56 66 53 30 North Oxford 49 52 64 67 31 Belmont 22 28 25 32 56 17 East Emley Moor 44 51 47 41 37 16 Sandy Heath 31 27 24 21 39 25 North East Sudbury 51 44 41 47 35 26 Bilsdale West Moor 33 26 29 23 35 14 Tacolneston 62 55 59 65 52 24 Chalton 39 45 49 42 11 Scotland Pontop Pike 58 64 61 54 56/58 13 Angus 57 63 60 53 37 6 Midlands (West) Black Hill 40 46 43 50 37 8 Ridge Hill 22 28 25 32 35 23 Cragkelly 31 27 24 21 48 7 Sutton Coldfield 46 40 43 50 37 22 Darvel 33 2...